Klaus Edgar Roth1, Jennifer Peters2, Irene Schmidtmann3, Uwe Maus2, Daniel Stephan4, Peter Augat4. 1. Center of Orthopedic and Trauma Surgery, University Medical Center of the Johannes Gutenberg University, Mainz, Germany eddi.roth@unimedizin-mainz.de. 2. Center of Orthopedic and Trauma Surgery, University Medical Center of the Johannes Gutenberg University, Mainz, Germany. 3. Institute for Medical Biometry, Epidemiology and Computer Science, Johannes Gutenberg University, Mainz, Germany. 4. Institute for Biomechanics, Traumacenter, Murnau, Germany Paracelsus Medical University, Salzburg, Austria.
Abstract
BACKGROUND: Metatarsocuneiform (MTC) fusion is a treatment option for management of hallux valgus. We compared the biomechanical characteristics of an internal fixation device with plantar plate fixation. METHODS: Seven matched pairs of feet from human cadavers were used to compare the intramedullary (IM) device plus compression screw to plantar plate combined with a compression screw. Specimen constructs were loaded in a cyclic 4-point bending test. We obtained initial/final stiffness, maximum load, and number of cycles to failure. Bone mineral density was measured with peripheral quantitative computed tomography. Performance was compared using time to event analysis with number of cycles as time variable, and a proportional hazard model including shared frailty model fitted with treatment and bone mineral density as covariates. RESULTS: On average the plates failed after 7517 cycles and a maximum load of 167 N, while the IM-implants failed on average after 2946 cycles and a maximum load of 69 N. In all pairs the 1 treated with IM-implant failed earlier than the 1 treated with a plate (hazard ratio for IM-implant versus plate was 79.9 (95% confidence interval [6.1, 1052.2], P = .0009). The initial stiffness was 131 N/mm for the plantar plate and 43.3 N/mm for the IM implant. Initial stiffness (r = .955) and final stiffness (r = .952) were strongly related to the number of cycles to failure. Bone mineral density had no effect on the number of cycles to failure. CONCLUSION: Plantar plate fixation created a stronger and stiffer construct than IM fixation. CLINICAL RELEVANCE: A stiffer construct can reduce the risk of nonunion and shorten the period of non-weight-bearing.
BACKGROUND: Metatarsocuneiform (MTC) fusion is a treatment option for management of hallux valgus. We compared the biomechanical characteristics of an internal fixation device with plantar plate fixation. METHODS: Seven matched pairs of feet from human cadavers were used to compare the intramedullary (IM) device plus compression screw to plantar plate combined with a compression screw. Specimen constructs were loaded in a cyclic 4-point bending test. We obtained initial/final stiffness, maximum load, and number of cycles to failure. Bone mineral density was measured with peripheral quantitative computed tomography. Performance was compared using time to event analysis with number of cycles as time variable, and a proportional hazard model including shared frailty model fitted with treatment and bone mineral density as covariates. RESULTS: On average the plates failed after 7517 cycles and a maximum load of 167 N, while the IM-implants failed on average after 2946 cycles and a maximum load of 69 N. In all pairs the 1 treated with IM-implant failed earlier than the 1 treated with a plate (hazard ratio for IM-implant versus plate was 79.9 (95% confidence interval [6.1, 1052.2], P = .0009). The initial stiffness was 131 N/mm for the plantar plate and 43.3 N/mm for the IM implant. Initial stiffness (r = .955) and final stiffness (r = .952) were strongly related to the number of cycles to failure. Bone mineral density had no effect on the number of cycles to failure. CONCLUSION: Plantar plate fixation created a stronger and stiffer construct than IM fixation. CLINICAL RELEVANCE: A stiffer construct can reduce the risk of nonunion and shorten the period of non-weight-bearing.
Authors: Rene Burchard; Robin Massa; Christian Soost; Wolfgang Richter; Gerhard Dietrich; Arne Ohrndorf; Hans-Jürgen Christ; Claus-Peter Fritzen; Jan Adriaan Graw; Jan Schmitt Journal: J Orthop Surg Res Date: 2018-07-11 Impact factor: 2.359
Authors: Daniel López-López; Ricardo Larrainzar-Garijo; Ricardo Becerro De-Bengoa-Vallejo; Marta Elena Losa-Iglesias; Javier Bayod-López Journal: Int Wound J Date: 2021-07-13 Impact factor: 3.315
Authors: Sarah Ettinger; Lisa-Christin Hemmersbach; Michael Schwarze; Christina Stukenborg-Colsman; Daiwei Yao; Christian Plaass; Leif Claassen Journal: Foot Ankle Int Date: 2021-08-05 Impact factor: 2.827