Literature DB >> 25105753

Impact of atmospheric boundary layer depth variability and wind reversal on the diurnal variability of aerosol concentration at a valley site.

S Pal1, T R Lee2, S Phelps2, S F J De Wekker2.   

Abstract

The development of the atmospheric boundary layer (ABL) plays a key role in affecting the variability of atmospheric constituents such as aerosols, greenhouse gases, water vapor, and ozone. In general, the concentration of any tracers within the ABL varies due to the changes in the mixing volume (i.e. ABL depth). In this study, we investigate the impact on the near-surface aerosol concentration in a valley site of 1) the boundary layer dilution due to vertical mixing and 2) changes in the wind patterns. We use a data set obtained during a 10-day field campaign in which a number of remote sensing and in-situ instruments were deployed, including a ground-based aerosol lidar system for monitoring of the ABL top height (zi), a particle counter to determine the number concentration of aerosol particles at eight different size ranges, and tower-based standard meteorological instruments. Results show a clearly visible decreasing trend of the mean daytime zi from 2900 m AGL (above ground level) to 2200 m AGL during a three-day period which resulted in increased near-surface pollutant concentrations. An inverse relationship exists between the zi and the fine fraction (0.3-0.7 μm) accumulation mode particles (AMP) on some days due to the dilution effect in a well-mixed ABL. These days are characterized by the absence of daytime upvalley winds and the presence of northwesterly synoptic-driven winds. In contrast, on the days with an onset of an upvalley wind circulation after the morning transition, the wind-driven local transport mechanism outweighs the ABL-dilution effect in determining the variability of AMP concentration. The interplay between the ABL depth evolution and the onset of the upvalley wind during the morning transition period significantly governs the air quality in a valley and could be an important component in the studies of mountain meteorology and air quality.
Copyright © 2014 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Accumulation mode particles; Air quality; Atmospheric boundary layer; Dilution effect; Lidar; Valley-wind

Mesh:

Substances:

Year:  2014        PMID: 25105753     DOI: 10.1016/j.scitotenv.2014.07.067

Source DB:  PubMed          Journal:  Sci Total Environ        ISSN: 0048-9697            Impact factor:   7.963


  4 in total

1.  Unexpected rise of atmospheric secondary aerosols from biomass burning during the COVID-19 lockdown period in Hangzhou, China.

Authors:  Huifeng Xu; Linghong Chen; Jiansong Chen; Zhier Bao; Chenxi Wang; Xiang Gao; Kefa Cen
Journal:  Atmos Environ (1994)       Date:  2022-03-28       Impact factor: 5.755

2.  Evaluating the Governing Factors of Variability in Nocturnal Boundary Layer Height Based on Elastic Lidar in Wuhan.

Authors:  Wei Wang; Feiyue Mao; Wei Gong; Zengxin Pan; Lin Du
Journal:  Int J Environ Res Public Health       Date:  2016-11-01       Impact factor: 3.390

3.  PM2.5 Spatiotemporal Variations and the Relationship with Meteorological Factors during 2013-2014 in Beijing, China.

Authors:  Fangfang Huang; Xia Li; Chao Wang; Qin Xu; Wei Wang; Yanxia Luo; Lixin Tao; Qi Gao; Jin Guo; Sipeng Chen; Kai Cao; Long Liu; Ni Gao; Xiangtong Liu; Kun Yang; Aoshuang Yan; Xiuhua Guo
Journal:  PLoS One       Date:  2015-11-03       Impact factor: 3.240

4.  How to Get the Best from Low-Cost Particulate Matter Sensors: Guidelines and Practical Recommendations.

Authors:  Erika Brattich; Alessandro Bracci; Alessandro Zappi; Pietro Morozzi; Silvana Di Sabatino; Federico Porcù; Francesca Di Nicola; Laura Tositti
Journal:  Sensors (Basel)       Date:  2020-05-29       Impact factor: 3.576

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.