Literature DB >> 24997811

Impact on the biomechanics of overground gait of using an 'Echelon' hydraulic ankle-foot device in unilateral trans-tibial and trans-femoral amputees.

Alan R De Asha1, Ramesh Munjal2, Jai Kulkarni3, John G Buckley4.   

Abstract

BACKGROUND: If a prosthetic foot creates resistance to forwards shank rotation as it deforms during loading, it will exert a braking effect on centre of mass progression. The present study determines whether the centre of mass braking effect exerted by an amputee's habitual rigid 'ankle' foot was reduced when they switched to using an 'Echelon' hydraulic ankle-foot device.
METHODS: Nineteen lower limb amputees (eight trans-femoral, eleven trans-tibial) walked overground using their habitual dynamic-response foot with rigid 'ankle' or 'Echelon' hydraulic ankle-foot device. Analysis determined changes in how the centre of mass was transferred onto and above the prosthetic-foot, freely chosen walking speed, and spatio-temporal parameters of gait.
FINDINGS: When using the hydraulic device both groups had a smoother/more rapid progression of the centre of pressure beneath the prosthetic hindfoot (p≤0.001), and a smaller reduction in centre of mass velocity during prosthetic-stance (p<0.001). As a result freely chosen walking speed was higher in both groups when using the device (p≤0.005). In both groups stance and swing times and cadence were unaffected by foot condition whereas step length tended (p<0.07) to increase bilaterally when using the hydraulic device. Effect size differences between foot types were comparable across groups.
INTERPRETATION: Use of a hydraulic ankle-foot device reduced the foot's braking effect for both amputee groups. Findings suggest that attenuation of the braking effect from the foot in early stance may be more important to prosthetic-foot function than its ability to return energy in late stance.
Copyright © 2014. Published by Elsevier Ltd.

Entities:  

Keywords:  Amputee; Gait; Prosthesis; Trans-femoral; Trans-tibial; Walking speed

Mesh:

Year:  2014        PMID: 24997811     DOI: 10.1016/j.clinbiomech.2014.06.009

Source DB:  PubMed          Journal:  Clin Biomech (Bristol, Avon)        ISSN: 0268-0033            Impact factor:   2.063


  4 in total

1.  The influence of a hydraulic prosthetic ankle on residual limb loading during sloped walking.

Authors:  Sara R Koehler-McNicholas; Eric A Nickel; Joseph Medvec; Kyle Barrons; Spencer Mion; Andrew H Hansen
Journal:  PLoS One       Date:  2017-03-09       Impact factor: 3.240

2.  Standing on slopes - how current microprocessor-controlled prosthetic feet support transtibial and transfemoral amputees in an everyday task.

Authors:  Michael Ernst; Björn Altenburg; Malte Bellmann; Thomas Schmalz
Journal:  J Neuroeng Rehabil       Date:  2017-11-16       Impact factor: 4.262

3.  Mobility analysis of AmpuTees (MAAT 5): Impact of five common prosthetic ankle-foot categories for individuals with diabetic/dysvascular amputation.

Authors:  Shane R Wurdeman; Phillip M Stevens; James H Campbell
Journal:  J Rehabil Assist Technol Eng       Date:  2019-02-13

4.  A biomechanical assessment of hydraulic ankle-foot devices with and without micro-processor control during slope ambulation in trans-femoral amputees.

Authors:  Xuefei Bai; David Ewins; Andrew David Crocombe; Wei Xu
Journal:  PLoS One       Date:  2018-10-05       Impact factor: 3.240

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.