I C de Moraes Porto1, L E das Neves, C K de Souza, A Parolia, N Barbosa dos Santos. 1. Department of Restorative Dentistry, School of Dentistry, Cesmac University Center, Rua Cônego Machado, 918, Farol, CEP 57051-160, Maceió, Alagoas, Brazil, Tel: 55-82-3215-5031; Fax: 55-82-3215-5214; e-mail: isabel.porto@cesmac.com.br.
Abstract
UNLABELLED: The longevity and durability of composite resins are influenced by the actions of water, saliva, drinks, food and features of the oral environment. OBJECTIVE: The aim of this study was to evaluate the effect of mouthwashes containing alcohol on the surface hardness, sorption and solubility of composite resins. METHODS: Disc-shaped specimens were prepared with two composite resins Z250 (Z2) and Z350XT (Z3). Measurements of Vickers hardness were performed before and after immersion in Plax, PerioGard, Listerine, ethanol and distilled water for 12 h at 37°C, followed by a further 12 h at 37°C in artificial saliva. Sorption and solubility were performed according to ISO 4049. Data were analysed using one-way ANOVA and Tukey tests (α=0.05). RESULTS: None of the mouthwashes significantly reduced the hardness of the resin Z2 (p>0.05). The greatest change in resin Z3 hardness was produced by PerioGard (p<0.01). Plax produced the lowest changes in the sorption and solubility of resins Z2 and Z3 (p<0.01), followed by Listerine and PerioGard. CONCLUSIONS: The sorption and solubility properties of the composite resins were more altered by mouthwashes than the surface hardness.
UNLABELLED: The longevity and durability of composite resins are influenced by the actions of water, saliva, drinks, food and features of the oral environment. OBJECTIVE: The aim of this study was to evaluate the effect of mouthwashes containing alcohol on the surface hardness, sorption and solubility of composite resins. METHODS: Disc-shaped specimens were prepared with two composite resins Z250 (Z2) and Z350XT (Z3). Measurements of Vickers hardness were performed before and after immersion in Plax, PerioGard, Listerine, ethanol and distilled water for 12 h at 37°C, followed by a further 12 h at 37°C in artificial saliva. Sorption and solubility were performed according to ISO 4049. Data were analysed using one-way ANOVA and Tukey tests (α=0.05). RESULTS: None of the mouthwashes significantly reduced the hardness of the resin Z2 (p>0.05). The greatest change in resin Z3 hardness was produced by PerioGard (p<0.01). Plax produced the lowest changes in the sorption and solubility of resins Z2 and Z3 (p<0.01), followed by Listerine and PerioGard. CONCLUSIONS: The sorption and solubility properties of the composite resins were more altered by mouthwashes than the surface hardness.
Authors: J Tomaszewska; D Bieliński; M Binczarski; J Berlowska; P Dziugan; J Piotrowski; A Stanishevsky; I A Witońska Journal: RSC Adv Date: 2018-01-17 Impact factor: 4.036