Literature DB >> 24951884

Source of atmospheric heavy metals in winter in Foshan, China.

Ji-Hua Tan1, Jing-Chun Duan2, Yong-Liang Ma3, Fu-Mo Yang4, Yuan Cheng3, Ke-Bin He3, Yong-Chang Yu5, Jie-Wen Wang5.   

Abstract

Foshan is a ceramics manufacturing center in the world and the most polluted city in the Pearl River Delta (PRD) in southern China measured by the levels of atmospheric heavy metals. PM2.5 samples were collected in Foshan in winter 2008. Among the 22 elements and ions analyzed, 7 heavy metals (Zn, V, Mn, Cu, As, Cd and Pb) were studied in depth for their levels, spatiotemporal variations and sources. The ambient concentrations of the heavy metals were much higher than the reported average concentrations in China. The levels of Pb (675.7 ± 378.5 ng/m(3)), As (76.6 ± 49.1 ng/m(3)) and Cd (42.6 ± 45.2 ng/m(3)) exceeded the reference values of NAAQS (GB3095-2012) and the health guidelines of the World Health Organization. Generally, the levels of atmospheric heavy metals showed spatial distribution as: downtown site (CC, Chancheng District)>urban sites (NH and SD, Nanhai and Shunde Districts)>rural site (SS, Shanshui District). Two sources of heavy metals, the ceramic and aluminum industries, were identified during the sampling period. The large number of ceramic manufactures was responsible for the high levels of atmospheric Zn, Pb and As in Chancheng District. Transport from an aluminum industry park under light north-west winds contributed high levels of Cd to the SS site (Shanshui District). The average concentration of Cd under north-west wind was 220 ng/m(3), 20.5 times higher than those under other wind directions. The high daily maximum enrichment factors (EFs) of Cd, Pb, Zn, As and Cu at all four sites indicated extremely high contamination by local emissions. Back trajectory analysis showed that the heavy metals were also closely associated with the pathway of air mass. A positive matrix factorization (PMF) method was applied to determine the source apportionment of these heavy metals. Five factors (industry including the ceramic industry and coal combustion, vehicle emissions, dust, transportation and sea salt) were identified and industry was the most important source of atmospheric heavy metals. The present paper suggests a control policy on the four heavy metals Cd, Pb, Zn, and Cu, and suggests the inclusion of As in the ceramic industry emission standard in the future.
Copyright © 2014 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Chemical composition; Control policy; Foshan; PM(2.5); PMF

Mesh:

Substances:

Year:  2014        PMID: 24951884     DOI: 10.1016/j.scitotenv.2014.05.147

Source DB:  PubMed          Journal:  Sci Total Environ        ISSN: 0048-9697            Impact factor:   7.963


  7 in total

1.  Simulation of changes in heavy metal contamination in farmland soils of a typical manufacturing center through logistic-based cellular automata modeling.

Authors:  Menglong Qiu; Qi Wang; Fangbai Li; Junjian Chen; Guoyi Yang; Liming Liu
Journal:  Environ Sci Pollut Res Int       Date:  2015-09-05       Impact factor: 4.223

2.  Characteristics, sources and health risk assessment of toxic heavy metals in PM2.5 at a megacity of southwest China.

Authors:  Youping Li; Zhisheng Zhang; Huifang Liu; Hong Zhou; Zhongyu Fan; Mang Lin; Dalei Wu; Beicheng Xia
Journal:  Environ Geochem Health       Date:  2015-06-06       Impact factor: 4.609

3.  Atmospheric heavy metal deposition in agro-ecosystems in China.

Authors:  Yanling Zhang; Shixiang Zhang; Fengpeng Zhu; Aiguo Wang; Huaxin Dai; Sen Cheng; Jianwei Wang; Lina Tang
Journal:  Environ Sci Pollut Res Int       Date:  2017-12-12       Impact factor: 4.223

4.  Pollution characteristics and health risk assessment of heavy metals in dry atmospheric deposits from Sfax solar saltern area in southeast of Tunisia.

Authors:  Moez Bahloul
Journal:  J Environ Health Sci Eng       Date:  2020-01-08

5.  Health Risk Assessment of Trace Metals in Various Environmental Media, Crops and Human Hair from a Mining Affected Area.

Authors:  Wushuang Xie; Chi Peng; Hongtao Wang; Weiping Chen
Journal:  Int J Environ Res Public Health       Date:  2017-12-18       Impact factor: 3.390

6.  Source Apportionment and Influencing Factor Analysis of Residential Indoor PM2.5 in Beijing.

Authors:  Yibing Yang; Liu Liu; Chunyu Xu; Na Li; Zhe Liu; Qin Wang; Dongqun Xu
Journal:  Int J Environ Res Public Health       Date:  2018-04-05       Impact factor: 3.390

7.  Using Multisource Data to Assess PM2.5 Exposure and Spatial Analysis of Lung Cancer in Guangzhou, China.

Authors:  Wenfeng Fan; Linyu Xu; Hanzhong Zheng
Journal:  Int J Environ Res Public Health       Date:  2022-02-24       Impact factor: 3.390

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.