Literature DB >> 24945979

Effects of pH on the speciation coefficients in models of bromide influence on the formation of trihalomethanes and haloacetic acids.

Paolo Roccaro1, Gregory V Korshin2, David Cook3, Christopher W K Chow3, Mary Drikas3.   

Abstract

This study investigated effects of pH, bromide and natural organic matter (NOM) level on yields and speciation of trihalomethanes (THMs) and haloacetic acids (HAAs) in chlorinated water. Experimental data were obtained using two water sources, one with a medium (DOC = 1.4 mg/L and SUVA = 2.60 L mg(-1) m(-1)) and the other with higher (DOC = 7.7 mg/L and SUVA = 4.26 L mg(-1) m(-1)) organic carbon level. The experiments employed the simulated distribution system (SDS) procedure at varying bromide concentrations and pH values of 7.0, 8.5 and 10. The speciation of THMs and dihalogenated HAAs (DHAAs) was interpreted based on the modelling of mixed halogenation yields via dimensionless ratios of bromination/chlorination reaction rates at each halogen incorporation node. The approach allowed precise modelling of the speciation of THMs and DHAAs at all examined pHs. In the case of DHAA, the dimensionless ratios of the bromination/chlorination reaction rates were not consistently affected by pH variations. For THMs, increase of pH caused the values of the dimensionless bromination/chlorination reaction rates to decrease in the case of halogenation of the initial reaction sites indicating a decreasing preference toward bromination at this reaction node. A similar trend was observed for the reactivity of dichlorinated reaction intermediate denoted as SCl2 whose formation precedes the release of CHCl3 and CHBrCl2. A similar but less consistent trend was observed for intermediate SBrCl whose halogenation yields both CHBrCl2 and CHBr2Cl. An opposite trend of increasing preference towards bromination at higher pHs was observed monobrominated intermediate SBr and in some extent dibrominated intermediate SBr2. These results help develop detailed DBP speciation models which needed to better understand the generation and potential health effects of THMs and HAAs at varying operating conditions and ultimately to adopt measure to minimize their levels in drinking water systems.
Copyright © 2014 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Chlorination; Disinfection by-products (DBP); Kinetics; Modelling; Natural organic matter (NOM); SUVA

Mesh:

Substances:

Year:  2014        PMID: 24945979     DOI: 10.1016/j.watres.2014.05.024

Source DB:  PubMed          Journal:  Water Res        ISSN: 0043-1354            Impact factor:   11.236


  4 in total

1.  Seasonal and spatial evolution of trihalomethanes in a drinking water distribution system according to the treatment process.

Authors:  A Domínguez-Tello; A Arias-Borrego; Tamara García-Barrera; J L Gómez-Ariza
Journal:  Environ Monit Assess       Date:  2015-10-03       Impact factor: 2.513

2.  Effects of operating conditions on trihalomethanes formation and speciation during chloramination in reclaimed water.

Authors:  Fang Wang; Baoyu Gao; Defang Ma; Ruihua Li; Shenglei Sun; Qinyan Yue; Yan Wang; Qian Li
Journal:  Environ Sci Pollut Res Int       Date:  2015-09-17       Impact factor: 4.223

3.  Modeling of trihalomethanes (THMs) in drinking water supplies: a case study of eastern part of India.

Authors:  Minashree Kumari; S K Gupta
Journal:  Environ Sci Pollut Res Int       Date:  2015-04-26       Impact factor: 4.223

4.  Disinfection Byproducts in Drinking Water and Evaluation of Potential Health Risks of Long-Term Exposure in Nigeria.

Authors:  Nsikak U Benson; Oyeronke A Akintokun; Adebusayo E Adedapo
Journal:  J Environ Public Health       Date:  2017-08-16
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.