Aerosol performance and long-term stability of surfactant-associated liposomal ciprofloxacin formulations with modified encapsulation and release properties.

Previously, we showed that the encapsulation and release properties of a liposomal ciprofloxacin formulation could be modified post manufacture, by addition of surfactant in concert with osmotic swelling of the liposomes. This strategy may provide more flexibility and convenience than the alternative of manufacturing multiple batches of liposomes differing in composition to cover a wide range of release profiles. The goal of this study was to develop a surfactant-associated liposomal ciprofloxacin (CFI) formulation possessing good long-term stability which could be delivered as an inhaled aerosol. Preparations of 12.5 mg/ml CFI containing 0.4% polysorbate 20 were formulated between pH 4.7 and 5.5. These formulations, before and after mesh nebulization, and after refrigerated storage for up to 2 years, were characterized in terms of liposome structure by cryogenic transmission electron microscopy (cryo-TEM) imaging, vesicle size by dynamic light scattering, pH, drug encapsulation by centrifugation-filtration, and in vitro release (IVR) performance. Within the narrower pH range of 4.9 to 5.2, these formulations retained their physicochemical stability after 2-year refrigerated storage, were robust to mesh nebulization, and formed respirable aerosols with a volume mean diameter (VMD) of 3.7 μm and a geometric standard deviation (GSD) of 1.7. This study demonstrates that it may be possible to provide a range of release profiles by simple addition of surfactant to a liposomal formulation post manufacture, and that these formulations may retain their physicochemical properties after long-term refrigerated storage and following aerosolization by mesh nebulizer.

INTRODUCTION

Liposomes represent a versatile formulation and delivery technology that can be used to modulate a drug’s pharmacokinetic profile with the potential to improve both the safety and efficacy of treatment (1,2). Liposomal formulations are now well-accepted with more than ten liposomal pharmaceutical products approved to treat a variety of indications as diverse as fungal infection, ovarian cancer, myeloma, macular degeneration, and leukemia (2,3). The physicochemical and release properties can be designed into the liposomal formulation through appropriate selection of a number of variables including the lipid and sterol composition, the ratio of sterol to lipid, the addition of surface-modifying groups (e.g., polyethylene glycol), the size and lamellarity of the liposomes, the method of drug loading, the state of the drug inside the liposomes, and the ratio of drug to lipid (1,4,5).

Generally, once a liposome formulation has been manufactured, its drug release properties are not typically modifiable. Thus, in order to provide personalized therapy to individuals, who may optimally respond to distinct drug release profiles, multiple batches of liposomes would have to be manufactured possessing different release kinetics. Because of the complexity and expense of this approach, from both a manufacturing and regulatory perspective, none of the currently marketed liposomal products come in multiple formats each with its own unique release behavior. A simple and flexible approach which allows modification of the drug release rate of a single liposomal formulation post manufacture, could address this issue.

In a previous study, we demonstrated that the encapsulation and drug release properties of a liposomal ciprofloxacin formulation could be altered by addition of surfactant in combination with osmotic swelling of the liposome (6). In absence of osmotic swelling, the surfactant caused only a small change in the drug encapsulation state (~6% loss of encapsulated drug for 12.5 mg/mL CFI mixed with 0.4% polysorbate 20) and there was no change in the IVR profile (6). In contrast, for 12.5 mg/mL CFI mixed with 0.4% polysorbate 20 under hypotonic conditions, the drug encapsulation state decreased by ~30% and this formulation also had a much faster IVR profile than the unmodified formulation (6). In the present study, we were interested whether surfactant-associated liposome formulations could be designed to retain their physicochemical properties under long-term refrigerated storage and following aerosol delivery using nebulizers.

Currently, there are no liposomal formulations approved for delivery by the inhalation route. However, the potential for liposomal formulations of drugs to be used to treat lung disease has been intensively investigated, both in terms of understanding the in vitro requirements and the medical opportunities (2,3,7,8). A marketed liposomal formulation of amphotericin B has been used off-label in lung transplant patients as a prophylaxis to prevent fungal infections and was found to be better tolerated than formulations of free amphotericin B (3). Repeated inhalation of amphotericin B liposomes also did not appear to alter the composition of the lipid and surfactant pool in the lungs, nor were there any changes in lung function, suggesting an acceptable safety profile (9). Two inhaled liposomal antibiotic formulations are now in late stages of clinical development to treat lung infection (2,10).

Inhaled ARIKACE®, liposomal amikacin (Insmed, Monmouth Junction, NJ), in cystic fibrosis (CF) patients, was found to reduce Pseudomonas aeruginosa (PA) colonization and improve lung function at the end of each of the six 28-day treatment cycles (11). In a Phase 3 trial in CF patients designed to support regulatory filing in Europe and Canada, once-daily ARIKACE met the primary endpoint of non-inferiority to inhaled tobramycin solution dosed twice-daily (12). Inhaled ARIKACE is also being evaluated in a Phase 2 trial in 90 patients with nontuberculous mycobacteria (NTM) lung infections and enrollment was recently completed; the primary efficacy data of change in mycobacteria density are expected to be reviewed and released to the FDA before the end of Q1, 2014. Pulmaquin® (Aradigm Corporation, Hayward, CA), a dual release formulation of liposomal ciprofloxacin and unencapsulated ciprofloxacin with an in vivo half-life of ~10 h, achieved the primary and a secondary measure of efficacy in a Phase 2 trial in non-CF bronchiectasis and has cleared a US IND to enter Phase 3 trials in that indication (13).

In addition to meeting all specification criteria typical for pharmaceutical products, including those used to verify strength, quality, purity, and potency of the product, liposomal formulations intended for inhalation should also be robust to the aerosolization process (2). Most inhaled liposomal formulations have been developed for use with nebulizers but the nebulization process often compromises the state of drug encapsulation or modifies the vesicle size distribution (2). The presence of surfactant in the liposome formulation may serve to exacerbate this tendency for disruption by nebulization. In fact, a liposome formulation containing polysorbate 80 to increase its deformability was found to be unstable to jet, ultrasonic, and vibrating mesh nebulization with release of up to 98% of the encapsulated salbutamol sulfate drug (14). Thus, it might be expected that surfactant-modified liposome formulations, with altered encapsulation and release profiles, may be inherently unstable to the nebulization process. Thus, the selected formulations were placed on long-term stability and also evaluated for their stability in response to mesh nebulization. Jet nebulizers were also evaluated but rejected because the presence of surfactant caused excessive foaming in those devices. The goal of this study was to identify surfactant-associated liposome formulations that retained their physicochemical properties on stability and following mesh nebulization. This research is consistent with the overarching mission of personalized medicine by developing a simple methodology, addition of surfactant, to modify the release properties of an inhaled liposomal formulation.

MATERIALS AND METHODS

Materials

Lipoquin, liposomal ciprofloxacin (CFI), 50 mg/ml in a histidine-buffered aqueous formulation at pH 6.0 and free ciprofloxacin (FCI), 20 mg/ml, in an acetate-buffered aqueous formulation at pH 3.3 were from Aradigm Corporation (Hayward, CA). Nanosep centrifugal filtration devices, 10 K and 30 K molecular weight, were obtained from Pall Corporation (Ann Arbor, MI). Deionized water was used for all studies. Polysorbate 20 was purchased from VWR Int. (West Chester, NJ) while HEPES, free acid was purchased from Avantor (Center Valley, PA). Sodium chloride and sodium acetate were obtained from Amresco (Solon, OH) and Sigma-Aldrich (St. Louis, MO), respectively. HPLC grade methanol was purchased from Fisher Scientific (Fair Lawn, NJ) and Triethylamine (TEA) and HPLC grade methanol were obtained from HyClone (Logan, Utah) and JT Baker (Center Valley, Pennsylvania), respectively.

Preparation of Liposomal Ciprofloxacin

Lipoquin is an aqueous dispersion of unilamellar liposomes of ~80 nm containing hydrogenated soy phosphatidylcholine (HSPC) and cholesterol. The preparation of Lipoquin, liposomal ciprofloxacin (CFI), has been reported previously (15,16). Briefly, multilamellar liposomes are extruded through membranes to produce unilamellar liposomes which are then actively loaded with ciprofloxacin (17,18). Any unencapsulated ciprofloxacin is removed by diafiltration resulting in >99% encapsulated ciprofloxacin at a target concentration of 50 mg/ml ciprofloxacin. Pulmaquin, dual release ciprofloxacin for inhalation (DRCFI), is an equivolume mixture of FCI and CFI resulting in ~70% encapsulated and ~30% free ciprofloxacin.

Preparation and Selection of CFI Formulations for Long-Term Stability

CFI was diluted from 50 mg/ml to 12.5 mg/ml with water, sodium acetate buffer (25 mM sodium acetate, 145 mM NaCl, pH 4.0), and polysorbate 20, to achieve a final polysorbate 20 concentration of 0.4% (w/v). The target pH was 5.5 (for the unadjusted formulation), and 5.2, 4.9, and 4.7 for the three pH adjusted formulations, by varying the proportion of water or sodium acetate buffer that was added. These four formulations containing 12.5 mg/ml CFI, 0.4% polysorbate 20, but differing in pH and osmolarity, were stored at refrigerated conditions for evaluation of long-term stability. Fifty milliliters of each formulation was prepared and ~6 ml aliquots were pipetted into eight 10 ml glass vials and stored at 2–8°C until use. At various time points, including initial, 1 month, 2.5 months, 6 months, 1 year, and 2 years, vials were removed for analysis of their appearance, pH, vesicle size distribution, and drug encapsulation. The IVR profile was determined at the initial, 6-month and 1-year time points. The aerosol properties were determined at the initial, 1-month, and 6-month time points.

Aerosol Characterization

The aerosol particle size distribution of the 12.5 mg/ml CFI formulation containing 0.4% polysorbate 20, pH 5.5 was determined using laser diffraction (HELOS/BF, Sympatec GmbH, Clausthal-Zellerfeld, Germany). The aerosol output was drawn at 12.5 L/min through a flow-through cell in front of the optical lens and twenty time slices of 500 μs each were analyzed. WINDOX 5 software was used assuming a shape factor of 1.00, density of 1.019 g/cm3, and Mie analysis mode to calculate a volume mean diameter (VMD) and geometric standard deviation (GSD).

At the initial time point, 5 ml aliquots of the control CFI formulation and the pH 5.5, 4.9, and 4.7 CFI formulations containing 0.4% polysorbate 20 were loaded into the Pari eFlow® rapid nebulizer reservoir (Pari Pharma, Starnberg, Germany) with a 4-μm mesh, the nebulizer was turned on, and the aerosol output was collected in an SKC BioSampler (USA) containing 5 ml of 25 mM acetate buffer, pH 4.0. The nebulization time and mass of liposomal ciprofloxacin in the nebulizer residual and collected aerosol compartments were determined in each of the duplicate experiments. The mean vesicle size and state of encapsulation were determined before nebulization and after nebulization for the formulation recovered in the nebulizer reservoir and the collected aerosol. In subsequent characterization experiments at the 1-month and 6-month time points, the aerosol evaluation was performed on the formulation which accumulated in the device mouthpiece, rather than drawing the aerosol into the SKC Biosampler, as it was suspected that the collection in the Biosampler could modify the vesicle size. The sample from the mouthpiece represented impaction of droplets that had passed through the mesh and were exposed to the aerosolization process. For the 1-month and 6-month time points, both the vesicle size and encapsulation state were additionally measured. The IVR profiles of the aerosolized samples were characterized at the 6-month time point only.

pH

A Beckman Phi690 pH Meter (Fullerton, CA) with a Beckman Coulter combination pH electrode, Model 511275 (Fullerton, CA), was calibrated using Fisher (Fairlawn, NJ) pH 4.00 and 6.00 buffer standards and then used to measure the pH of the experimental samples.

Vesicle Size

To measure the liposome size distribution of each experimental CFI sample, a Submicron Particle Sizer Autodilute Model 370 (Nicomp, USA) was used. Each CFI sample was diluted with isotonic saline to a concentration of ~2 mg/ml liposomes and 0.5 ml was transferred to a disposable culture tube (Kimble Glass Inc., USA). The mean and standard deviation (SD) of the vesicle size distribution were recorded using the following instrument parameters: temperature, 23°C; viscosity, 0.933; refractive index, 1.333; intensity set point, 300 KHz; channel width, 10 μs; scattering angle, 90°; run time, 5 min; mode, vesicle; and Gaussian distribution.

Drug Encapsulation

The percent drug encapsulation was determined by separating the free drug from the encapsulated drug using Nanosep centrifugation devices. Briefly, each sample was diluted tenfold into acetate buffer (50 mM sodium acetate, 145 mM NaCl, pH 4.0) and 400 μL was transferred to the centrifuge device and centrifuged at 10,000 rpm (8,100×g). The filtrate containing the free ciprofloxacin component was analyzed by HPLC to measure ciprofloxacin content. The percent encapsulation of each sample was calculated by dividing the free drug component by the total drug content and multiplying by 100 to convert to a percentage.

Cryogenic Transition Electron Microscopy (cryo-TEM)

Cryo-TEM analysis was performed using a JEOL 2100 (Tokyo, Japan) instrument operated at 200 kV to image the liposome vesicles. Each sample was diluted with water to a liposome concentration of ~10 mg/ml lipids and 3 μL was transferred to a glow discharge Quantifoil carbon grid (Jena, Germany) in a chamber equilibrated at 22°C and 100% RH. Grids were blotted once with filter paper, at a blotting angle of 2 mm for 2 s, and vitrified by plunging into liquid ethane using a Vitrobot (F.E.I., Eindhoven, Netherlands). To ensure sample integrity prior to cryo-TEM analysis, the vitrified samples remained immersed in liquid nitrogen.

In Vitro Release (IVR)

The IVR assay measures the release of encapsulated ciprofloxacin when incubated at 37°C in 50% bovine serum (16). Briefly, each experimental sample was diluted to 50 μg/ml ciprofloxacin in HEPES Buffered Saline (HBS, 20 mM HEPES; 145 mM NaCl, pH 7.4) and mixed one-to-one with chilled (2–8°C) bovine serum and placed in a shaking water bath (Techne, TSBS40 (Staffordshire, UK)) at 37°C and 150 rpm. Duplicate samples were removed periodically; e.g., 30, 60, 120, and 240 min, diluted 1:1 with chilled HBS buffer, and placed in an ice water bath to terminate any further release of encapsulated drug from the liposomes. The released ciprofloxacin was separated from the liposome-encapsulated ciprofloxacin using the Nanosep centrifugal devices and quantified by HPLC as described previously (16). The percent release at each time point was determined by dividing the free drug by the total drug and multiplying by 100 to convert to a percentage. In order to compare the initial release rates of different formulations with different percentages of encapsulated drug, a normalized initial rate of release was calculated. This was done by subtracting the percentage of drug released initially from that released at the 30 min time point; i.e., (T30min − T0min). This initial release value was then divided by the total available range for release (T240min − T0min) and converted to a percentage: 100 × (T30min − T0min) / (T240min − T0min).

High Performance Liquid Chromatography (HPLC)

An HPLC method was used to quantify the amount of ciprofloxacin in each sample as described previously (19). Briefly, this was achieved using a Nucleosil C-18 column (5 μm, 4.6 × 150 mm, Canadian Life Science, CA) and a Nucleosil C-18 guard column (4 × 3.0 mm, Phenomenex, USA) both at 35°C. The mobile phase was an 83:17 (v/v) mixture of 0.5% TEA in water, pH 3.0 and 100% methanol. The isocratic elution was conducted at a flow rate was 0.9 ml/min. A wavelength of 277 nm was used to quantify ciprofloxacin content. Ciprofloxacin concentrations were expressed in terms of ciprofloxacin hydrochloride.

RESULTS

Selection of CFI Formulations for Long-Term Stability

Dilution of 50 mg/mL CFI to 12.5 mg/mL with polysorbate 20 and water, instead of histidine buffer, to produce a hypotonic environment surrounding the liposomes, resulted in much greater release of the encapsulated ciprofloxacin (Fig. 1). Polysorbate 20 when added to CFI in a hypotonic environment at a concentration between 0.4 and 1.6%, caused ~30 to 40% of the encapsulated ciprofloxacin to be released from the liposomes, versus only ~6 to 8% release when the surfactant was added to CFI under isotonic conditions (Fig. 1). The combination of osmotic swelling of the liposomes, in concert with surfactant, allowed for more of the encapsulated drug to be released (6). In addition, the 12.5 mg/mL CFI formulation containing 0.4% polysorbate 20 when prepared in a hypotonic environment also possessed a faster release rate in the IVR assay, whereas lower concentrations of polysorbate 20 did not significantly alter the release rate (Fig. 2a). The CFI formulation containing 0.4% polysorbate 20 was compared to DRCFI, which is a ~70:30 mixture of CFI and unencapsulated ciprofloxacin, in the IVR assay and both possessed a comparable “burst” value of ~30%, but the surfactant-modified CFI formulation had a faster release profile than DRCFI (Fig. 2a). After 2 to 4 h incubation in the IVR assay, all formulations released nearly 100% of the encapsulated drug (Fig. 2a).

Fig. 1

The effect of addition of polysorbate 20 on the state of ciprofloxacin encapsulation when diluted with either water or isotonic histidine buffer, pH 6.0 buffer. CFI at 50 mg/ml ciprofloxacin was diluted to a final concentration of ~12.5 mg/ml with water or histidine buffer and then either an aliquot of 1 or 10% polysorbate 20 was added to achieve a final surfactant concentration of 0.1, 0.2, 0.4, 0.8, 1.2, 1.6, or 2.0%. After vortexing and allowing each sample to equilibrate for at least 30 min, the ciprofloxacin encapsulation state was determined by centrifugal filtration in duplicate. Adapted from reference (6)

Fig. 2

Evaluation of the effect of liposomal composition on the IVR assay. The control CFI formulation (at 50 mg/mL) and each of the 12.5 mg/mL CFI formulations were diluted to 50 μg/mL CFI in HEPES buffered saline (HBS) prior to a 1:1 dilution in bovine serum to measure the release of ciprofloxacin after incubation at 37°C for up to 4 h. a IVR profiles for control CFI (blue diamonds), DRCFI (orange circles), CFI in 0.05% polysorbate 20 (purple crosses), CFI in 0.1% polysorbate 20 (green triangles), CFI in 0.2% polysorbate 20 (blue stars), and CFI in 0.4% polysorbate 20 (red squares). Fig. 2a reprinted with permission from reference 6. b IVR profiles at the initial time point for control CFI (blue diamonds), CFI in 0.4% polysorbate 20, pH 5.5 (purple crosses), CFI in 0.4% polysorbate 20, pH 5.2 (green triangles), CFI in 0.4% polysorbate 20, pH 4.9 (blue stars), and CFI in 0.4% polysorbate 20, pH 4.7 (red squares). c IVR profiles at the 6-month time point for control CFI (blue diamonds), CFI in 0.4% polysorbate 20, pH 5.2 (green triangles), CFI in 0.4% polysorbate 20, pH 4.9 (blue stars), and CFI in 0.4% polysorbate 20, pH 4.7 (red squares). d IVR profiles at the 12-month time point for control CFI (blue diamonds), CFI in 0.4% polysorbate 20, pH 5.2 (green triangles), 12.5 mg/ml CFI in 0.4% polysorbate 20, pH 4.9 (blue stars), and 12.5 mg/ml CFI in 0.4% polysorbate 20, pH 4.7 (red squares). e IVR profiles at the 6-month time point after nebulization for the nebulizer residual solution (Neb Res) and collected aerosol, respectively: CFI in 0.4% polysorbate 20, pH 5.2 (blue diamonds and purple crosses), CFI in 0.4% polysorbate 20, pH 4.9 (green triangles and blue stars), and CFI in 0.4% polysorbate 20, pH 4.7 (red squares and orange circles). Each value represents the mean ± SD (n = 3 or 2). The error bars which are not visible are smaller than the width of the data symbols

Based on these results, the 12.5 mg/mL CFI formulation containing 0.4% polysorbate 20 added under hypotonic conditions was selected for further studies for its potential as an inhaled product. However, because ciprofloxacin is poorly soluble near neutral pH, this unbuffered formulation was not expected to possess good long-term stability. In fact, rod-shaped crystals of ciprofloxacin were observed external to the liposomes under light microscope within 48 h of addition of the surfactant when the pH was not adjusted from pH 5.5. In order to develop a formulation with acceptable long-term stability, the 50 mg/ml CFI formulation was diluted with polysorbate 20, sodium acetate buffer, and water to produce 12.5 mg/mL CFI formulations containing 0.4% polysorbate 20 and pH values of 5.2, 4.9, and 4.7. These formulations were stored refrigerated for periodic evaluation of appearance, vesicle size distribution, ciprofloxacin encapsulation, pH, and IVR profile.

Long-Term Stability

Appearance, Vesicle Size, and pH

The visual appearance of the pH 4.7 and 4.9 CFI formulations containing 0.4% polysorbate 20 remained particle-free throughout the 2-year study while a small number of fine particles were observed in the pH 5.2 formulation at the 2.5, 6, 12, and 24-month time points. Presumably, the small particles were fine crystals of ciprofloxacin external to the liposomes. The mean liposome vesicle size ranged between 89 and 100 nm across all four formulations through the 2-year time point (Table I). There was no meaningful change in vesicle size for any of the three formulations during the 1-year study. The pH was relatively unchanged for the pH 4.7, 4.9, and 5.2 CFI formulations containing 0.4% polysorbate 20 through 2 years (Table II).

Table I

The Vesicle Size Distribution of the CFI Control and the pH Adjusted 12.5 mg/ml CFI Formulations Containing 0.4% Polysorbate 20 After Refrigerated Storage for 2.5, 6, 12 and 24 Months. Vesicle Size Data are Reported as the Mean (in nm) and [SD]

Time (months)	CFI control	pH 5.2 CFI	pH 4.9 CFI	pH 4.7 CFI
0	90.5 [25.7]	90.6 [17.6]	91.8 [25.8]	93.4 [19.1]
2.5	90.3 [24.7]	93.6 [20.3]	93.9 [15.6]	95.2 [26.0]
6	90.8 [20.5]	93.6 [21.1]	94.1 [24.0]	96.5 [27.0]
12	94.1 [27.8]	94.3 [27.1]	93.7 [22.5]	95.6 [26.5]
24	88.7 [22.0]	98.8 [36.2]	99.9 [27.9]	97.0 [26.3]

12.5 mg/mL CFI Formulations in 0.4% polysorbate 20 at pH 5.2, 4.9, and 4.7

Table II

The pH of the CFI Control and the pH Adjusted 12.5 mg/ml CFI Formulations Containing 0.4% Polysorbate 20 After Refrigerated Storage for 1, 6, 12 and 24 Months

Time (months)	pH 5.2 CFI	pH 4.9 CFI	pH 4.7 CFI
0	5.18	4.91	4.67
1	5.14	4.89	4.63
6	4.88	4.82	4.61
12	5.05	4.93	4.71
24	5.05	5.02	4.85

12.5 mg/mL CFI formulations in 0.4% polysorbate 20 at pH 5.2, 4.9, and 4.7

Encapsulation

The encapsulation of the 50 mg/mL CFI control sample remained at ~99% over the 24-month period (Table III). The 12.5 mg/ml CFI formulation at pH 5.5 containing 0.4% polysorbate 20 had between 70 and 75% drug encapsulation initially, but these samples were not monitored on stability due to crystallization of the released ciprofloxacin. For the pH adjusted formulations, the initial percent encapsulation decreased from 99% to ~80, ~85, and ~92% when diluted with sodium acetate buffer and water to lower the pH to 5.2, 4.9, and 4.7, respectively (Table III). The more acetate buffer that was used to reduce the pH correlated with higher starting encapsulation values, consistent with the mechanism that release of encapsulated drug occurs to a greater extent under hypotonic conditions (6). These encapsulation values remained fairly constant over the 2-year refrigerated storage period (Table III).

Table III

The Percent Encapsulation of Ciprofloxacin in the CFI Control and in the pH Adjusted 12.5 mg/ml CFI Formulations Containing 0.4% Polysorbate 20 After Refrigerated Storage for 1, 2.5, 6, 12, and 24 Months

Time (months)	CFI Control	pH 5.2 CFI	pH 4.9 CFI	pH 4.7 CFI
0	99.5	80.1	84.9	92.8
1	98.9	77.0	84.7	91.1
2.5	99.6	79.0	86.6	94.8
6	99.1	76.5	81.2	89.6
12	99.7	80.0	86.9	92.2
24	99.3	80.8	85.4	92.0

12.5 mg/mL CFI Formulations in 0.4% polysorbate 20 at pH 5.2, 4.9, and 4.7

IVR Profiles

The IVR profiles of the three CFI formulations with adjusted pH values show similar characteristics to the IVR profile for the pH 5.5 formulation without pH modification at the initial time point (Fig. 2b). The IVR “burst” values ranged between 12 and 27% free drug for the four formulations prior to incubation at 37°C. The formulation with the lowest pH (pH 4.7) contained the greatest encapsulated drug (88%) and lowest free drug (12%) while the unmodified formulation at the highest pH (pH 5.5) had the lowest encapsulated drug (73%) and highest free drug (27%) in the IVR assay. These IVR “burst” values are comparable to the encapsulation values reported in Table III, as would be expected. The IVR profiles for the CFI formulations containing 0.4% polysorbate 20 at pH 4.9, 5.2, and 5.5 were comparable to each other, but were significantly faster than for the control CFI formulation without 0.4% polysorbate 20 (Fig. 2b and Table IV). However, the pH 4.7 CFI formulation had an even faster IVR profile with most of its drug content released within the first 30 min. At the end of the 4-h incubation period, all of the formulations reached a plateau representing ~100% release of encapsulated drug.

Table IV

The Normalized Rate of Release in the IVR Assay of the pH Adjusted 12.5 mg/mL CFI Formulations Containing 0.4% Polysorbate 20 After Refrigerated Storage for 1, 6, and 12 Months. The Initial Rate of Release in the IVR Assay is Defined as 100 × (T30 − T0) / (T240 − T0) was Normalized by Dividing by the Initial Rate of Release of the CFI Control at the Same Time Point and Expressed as a Percentage

Formulation	Normalized IVR (%)			Relative IVR (% of control CFI)
	Time (months)			Time (months)
	1	6	12	1	6	12
Control CFI	47.0	42.8	40.1	100	100	100
pH 5.5 CFI	55.7	ND	ND	118	ND	ND
pH 5.2 CFI	60.9	50.6	54.7	129	118	136
pH 4.9 CFI	64.3	52.2	58.9	137	122	147
pH 4.7 CFI	86.1	100.1	97.5	183	234	243

12.5 mg/mL CFI Formulations in 0.4% polysorbate 20 at pH 5.5, 5.2, 4.9, and 4.7. The normalized IVR equals = 100 × (T30min − T0min) / (T240min – T0min). The relative IVR = 100 × (normalized IVRSAMPLE / normalized IVRCONTROL)

ND not done

The IVR profiles for the pH 5.2, 4.9, and 4.7 CFI formulations containing 0.4% polysorbate 20 were assayed after refrigerated storage for 6 months (Fig. 2c) and 1 year (Fig. 2d). The IVR profiles for the CFI formulations containing 0.4% polysorbate 20 at pH 5.2, 4.9, and 4.7 were relatively unchanged over this 1-year time frame with respect to their “burst” values, indicative of the amount of encapsulated drug, their rates of release (Table IV), and their plateau values, which represented 100% release of encapsulated drug.

Initially, CFI formulations containing 0.4% polysorbate 20 were evaluated using various jet nebulizers to characterize their aerosol performance. The presence of the surfactant resulted in excessive foaming and led to very low and inconsistent aerosol output rates thus rendering jet nebulization inappropriate for use with these formulations. A transition to a vibrating mesh nebulizer, the PARI eFlow rapid, was then made. The aerosol particle size distribution of the 12.5 mg/ml CFI preparation containing 0.4% polysorbate 20, pH-5.5, was determined after mesh nebulization with a VMD of 3.74 μm (SD = 0.01 μm, n = 3) and a GSD of 1.72 (SD = 0.02, n = 3).

Aerosol Emitted Dose, and Effect on Vesicle Size and Encapsulation State

Using the PARI eFlow rapid, 5 mL of each formulation was nebulized ranging between 3.4 and 4.0 min, slightly faster than that for the CFI control without surfactant (Table V). The emitted dose (ED) values for the three experimental formulations ranged between 57 and 61% of the dose loaded in the nebulizer, lower than the ~72% ED observed for the CFI Control (Table V). Given the shorter nebulization times, it is not surprising that the ED values would be lower for the experimental formulations. The lower ED values for the experimental formulations were likely a result of the small amount of foam observed in the reservoirs which may have reduced the formulation volume that was available to pass through the mesh. The mass balance recovery exceeded 90% on average. For all three experimental formulations, the mean vesicle size increased by ~3 nm for the material recovered from the nebulizer reservoir and by an additional ~30 nm for the collected aerosol (Table V). This is in contrast to the control CFI formulation for which there was no significant change in mean vesicle size for either the nebulizer reservoir or collected aerosol compartments (Table V). The encapsulation state of formulation recovered from the nebulizer reservoir decreased significantly for all three formulations to between 65 and 77% whereas the encapsulation state of the control CFI formulation was unchanged (Table V).

Table V

Characterization of the Effect of Nebulization of the CFI Control and pH Adjusted 12.5 mg/ml CFI Formulations Containing 0.4% Polysorbate 20. The Vesicle Size Data are Reported as the Mean (in nm) and [SD]. The State of Ciprofloxacin Encapsulation is Reported in Terms of Percentage. The Percent Recovery of Ciprofloxacin in the Nebulizer Reservoir and in the Collected Aerosol (emitted dose) Allows for a Calculation of the Mass Balance. The Nebulization Time is Recorded in Minutes

Formulation	Experiment run no.	Mean vesicle size (nm) [SD]			Encapsulation (%)		Recovery (%)		Mass balance (%)	Neb. time (min)
		Before Neb.	Neb. Res.	Aerosol	Before Neb.	Neb. Res.	Neb. Res.	Aerosol
CFI control	#1	90.5 [25.7]	91.6 [22.9]	91.3 [22.7]	99.5	98.9	21.6	73.2	94.8	5.0
	#2	90.5 [25.7]	89.9 [22.3]	90.8 [25.9]	99.5	99.0	23.6	71.2	94.8	4.2
pH 5.5 CFI	#1	90.6 [17.6]	92.1 [24.9]	127.9 [77.6]	70.2	67.6	34.9	58.2	93.1	3.5
	#2	90.6 [17.6]	94.7 [23.2]	135.0 [85.0]	70.2	65.6	33.2	60.3	93.5	4.0
pH 5.2 CFI	ND	ND	ND	ND	80.1	ND	ND	ND	ND	ND
pH 4.9 CFI	#1	91.8 [25.4]	94.8 [28.1]	128.7 [76.6]	84.9	70.5	30.5	61.0	91.5	3.7
	#2	91.8 [25.4]	94.6 [29.0]	125.3 [74.5]	84.9	73.4	33.8	57.2	91.0	3.4
pH 4.7 CFI	#1	93.4 [19.1]	96.2 [26.0]	125.9 [73.0]	92.8	77.0	30.6	59.1	89.8	3.9
	#2	93.4 [19.1]	96.3 [25.8]	123.1 [72.7]	92.8	73.7	33.3	59.5	92.8	3.6

ND not done, Neb nebulization, Neb. Res. nebulizer reservoir solution

One Month Analysis: Effect on Vesicle Size and Encapsulation State

At the 1-month time point, the CFI formulations containing 0.4% polysorbate 20 at pH 5.2, 4.9, and 4.7 were aerosolized but this time, instead of collecting the aerosol in the BioSampler for subsequent analysis, aerosol droplets which coalesced inside the mouthpiece were evaluated for vesicle size and encapsulation state. This change was made in case the BioSampler collection process was contributing to changes in the state of the sample; e.g., the increase in vesicle size observed in the aerosol samples at the initial time point. For all three formulations, there was a small increase in the average vesicle size for the residual solution in the nebulizer reservoir, consistent with the initial assessment (Table VI). However, in contrast to the previous results at time zero, there was no additional increase in the vesicle size for the collected aerosol samples for all three formulations (Table VI). This result suggests that the BioSampler collection process was primarily responsible for the increase in the vesicle size upon aerosolization, not the mesh nebulization process itself. The encapsulation state for the formulation remaining in the nebulizer reservoir did not decrease as significantly for any of the three formulations as at the time zero analysis. However, the collected aerosol samples all decreased to an encapsulation state of between 70 and 80%, consistent with what was observed at time zero using the BioSampler (Table V).

Table VI

The Liposome Vesicle Size Distribution and the Percent Encapsulation of Ciprofloxacin After 1 and 6 Months Refrigerated Storage and Following Nebulization for the pH Adjusted 12.5 mg/ml CFI Formulations Containing 0.4% Polysorbate 20. Vesicle Size Data are Reported as the Mean (in nm) and [SD]. Duplicate Nebulization Experiments were Performed at the 1-Month Time Point Versus Single Experiments at the Six-Month Time Point

Formulation	Expt. run	Mean vesicle size (nm) [SD]			Encapsulation (%)
		Before Neb.	Neb. Res.	Aerosol	Before Neb.	Neb. Res.	Aerosol
1-month analysis
pH 5.2 CFI	#1	91.1 [19.7]	90.8 [24.2]	92.6 [32.0]	76.6	76.6	74.8
	#2	91.1 [19.7]	95.2 [16.7]	95.8 [32.2]	76.6	77.0	73.1
pH 4.9 CFI	#1	91.8 [25.3]	93.0 [24.4]	93.1 [33.7]	85.2	82.8	73.4
	#2	91.8 [25.3]	94.1 [26.9]	94.7 [29.7]	85.2	82.4	79.0
pH 4.7 CFI	#1	95.4 [27.4]	96.7 [23.6]	96.2 [27.9]	92.6	89.8	71.7
	#2	95.4 [27.4]	99.3 [27.5]	99.7 [30.8]	92.6	89.1	81.2
6-month analysis
pH 5.2 CFI		93.6 [21.1]	96.0 [23.8]	99.0 [29.2]	76.5	70.7	76.5
pH 4.9 CFI		94.1 [24.0]	96.5 [24.7]	97.6 [29.8]	81.2	75.7	77.2
pH 4.7 CFI		96.5 [27.0]	98.6 [23.1]	101.2 [34.2]	89.6	85.4	84.9

Six Month Analysis: Effect on Vesicle Size, Encapsulation State and IVR Profile

At the 6 month time point, the effect of aerosolization of the CFI formulations containing 0.4% polysorbate 20 at pH 5.2, 4.9, and 4.7 was evaluated with respect to vesicle size, encapsulation state, and IVR profile. For all three formulations, the mean vesicle size increased by 2–3 nm for the sample recovered from the nebulizer reservoir and by a further 1–3 nm for the collected aerosol sample (Table VI), consistent with what was observed at the 1-month time point. The encapsulation state decreased slightly by 1 to 6% for all three formulations whether recovered from the nebulizer reservoir or after aerosolization (Table VI).

After 6 months stability, the pH 4.7, 4.9, and 5.2 CFI formulations were aerosolized and the collected aerosol and the residual formulation in the nebulizer reservoir were evaluated in the IVR assay. The IVR profiles of the collected aerosol samples were comparable to those for the residual formulation remaining in the nebulizer reservoir (Fig. 2e). The IVR profiles for the aerosolized pH 5.2 and 4.9 CFI formulations containing 0.4% polysorbate 20 were also comparable to that for the unnebulized control samples at the 6-month time point (Fig. 2c). However, for the pH 4.7 CFI formulation containing 0.4% polysorbate 20, the IVR profiles for both the collected aerosol and nebulizer reservoir samples (Fig. 2e) did not show as rapid a release as for the unnebulized control (Fig. 2c), but instead had IVR profiles that were similar to the CFI formulations at higher pH.

Cryo-TEM Imaging

To examine if the physical structure of the liposomes was altered by nebulization, cryo-TEM imaging was performed. Cryo-TEM imaging of the control CFI without surfactant reveals a population of spherical, unilamellar vesicles between ~50 and 100 nm in diameter (Fig. 3a), consistent with that reported previously (15). Imaging was also performed on CFI diluted with 0.4% polysorbate 20 and water, to produce transient osmotic swelling, and an increase in free drug (Fig. 3b). The majority of these surfactant-associated liposomes looked qualitatively similar to that for control CFI (Fig. 3bvs.3a); however, there was a minority of liposomes that were lighter, consistent with loss of encapsulated drug (6). Cryo-TEM imaging was not performed on the pH adjusted CFI formulations. After exposure of the 12.5 mg/ml CFI formulation containing 0.4% polysorbate 20 at pH 5.5 to the mesh nebulization process, the aerosol sample recovered in the mouthpiece was not compromised with respect to the liposome structure or integrity as evidenced by cryo-TEM analysis (Fig. 3c). There was no noticeable change in the size distribution of the liposomes or an increase in the proportion of liposomes with lighter shading, which would have suggested loss of encapsulated drug. There was also no evidence of deformed liposomes or liposomal debris, which might be indicative of vesicle rupture during the mesh nebulization process.

Fig. 3

Cryo-TEM micrographs of various preparations of liposomal ciprofloxacin. The scale bar in the bottom left-hand corner of each micrograph is 100 nm for a, b, and c. All samples were applied at a concentration of ~10 mg/mL liposomes. a 12.5 mg/ml CFI; b 12.5 mg/ml CFI in 0.4% polysorbate 20, pH 5.5; and c 12.5 mg/ml CFI in 0.4% polysorbate 20, pH 5.5, after mesh nebulization

DISCUSSION

We have investigated the interaction of polysorbate 20 with a liposomal ciprofloxacin formulation with the goal to develop novel formulations with modified encapsulation states and release properties which could then be used in nebulizers. Our strategy was to mix polysorbate 20 with the liposomes, in conjunction with osmotic swelling, so that the liposome vesicles retain their integrity, but have altered drug release rates (6). The amount of unencapsulated ciprofloxacin increased with greater concentrations of surfactant (Fig. 1) and above 0.4% polysorbate 20 there was a more rapid release profile in the IVR assay (Fig. 2a). The encapsulation states of the CFI formulations containing polysorbate 20 were maintained on long-term stability (Table III) which supports the model that sublytic concentrations of surfactant form transient pores in liposome bilayers allowing release of some of the encapsulated drug before the membrane barrier is fully recovered (20,21). These liposomes might then be expected to maintain their structural integrity for prolonged time periods as was observed in our 2-year stability study. The cryo-TEM micrographs of mixtures of CFI and low levels of polysorbate 20 are practically indistinguishable from CFI alone (Figs. 3a, b). The micrographs show predominantly spherical, unilamellar liposomes between around 50 and 100 nm for the control CFI liposomes, as well as for the surfactant-associated liposomes prior to and after mesh nebulization (Fig. 3c).

Because ciprofloxacin is poorly soluble at neutral pH, the external pH of the surfactant-liposome mixture was reduced to 5.2, 4.9, and 4.7 to improve the likelihood that the released ciprofloxacin would remain in solution during long-term refrigerated storage. The pH 4.7 and 4.9 preparations retained good appearance after 2-year refrigerated storage in contrast to the pH 5.5 preparation which formed ciprofloxacin crystals within 48 h. The appearance of the pH 5.2 preparation showed some small particulates but otherwise showed no further deterioration after 24 months refrigerated storage. The intentional reduction in pH in these CFI formulations was associated with an increase in encapsulation relative to the pH 5.5 formulation, with the greatest encapsulation for the lowest pH CFI formulation (Table III). Because acetate buffer was used to lower the pH for the pH modified formulations, in place of some of the dilution water, the external environment would be less hypotonic. This observation may explain the higher levels of drug encapsulation for the lower pH formulations. Notably however, once this new encapsulation state was established, it did not fluctuate during the course of the 2-year refrigerated storage (Table III). Use of acetic acid, instead of acetate buffer, to perform the dilutions could be used in the future to reduce the pH while maintaining a more hypotonic environment so that the encapsulation state could be reduced further, similar to the levels for the pH 5.5 CFI formulation.

There was also a slight increase in vesicle size with reduction in pH upon preparation but there were no further vesicle size changes throughout the course of the 2-year refrigerated storage (Table II). The IVR profiles for the liposome-surfactant preparations at pH 5.2 and 4.9 were similar to that for the pH 5.5 preparation (Fig. 2b), and retained that modified release profile through 12 months refrigerated storage (Fig. 2c, d). In contrast, the pH 4.7 surfactant-liposome preparation had a much faster release profile in the IVR assay (Fig. 2b) that remained unchanged after 1-year refrigerated storage (Fig. 2c, d). It is unclear why the lowest pH liposome-surfactant preparation had an even faster release rate but it may be related to changes in the transmembrane pH gradient which is used to load the drug during manufacture of the liposomes (17,18).

Many liposomal products have been developed with the intention for inhalation administration to treat lung disease (2). However, very few have been found to be robust to the nebulization process (2). Liposomes containing surfactant have historically been even less stable than traditional liposomes in response to nebulization with changes in vesicle size or encapsulation (14,22). Ultradeformable liposome formulations containing salbutamol sulfate and comprised of soy phosphatidylcholine (PC), polysorbate 80, and cholesterol were evaluated in jet, ultrasonic, and mesh nebulizers and all combinations were found to have marked losses in drug encapsulation and changes in vesicle size (14). Liposomes containing cyclosporine and comprised of soy PC and polysorbate 80 were exposed to mesh nebulization and the average vesicle size doubled from 51 nm before nebulization to 107 nm after nebulization (22). However, there was no reported loss in drug encapsulation, presumably because the poorly soluble cyclosporine drug remained associated with the hydrophobic liposome bilayers (23). Specially designed liposomal ciprofloxacin formulations have already been shown to be stable to jet nebulization with no meaningful changes in vesicle size or loss in drug encapsulation (19,24). After mesh nebulization, surfactant-associated liposomal ciprofloxacin formulations (containing 0.4% polysorbate 20) showed a small increase in mean vesicle size (by a few nm) and the drug encapsulation also decreased to 70–85% (Table VI). However, the degree of modification to these surfactant-associated liposomal ciprofloxacin formulations is less pronounced than for those liposomal formulations discussed above (14,22).

Liposomal ciprofloxacin formulations containing 0.4% polysorbate 20 possessed modified release properties (Fig. 2a), yet were found to retain those IVR characteristics after 12 months refrigerated storage (Fig. 2d). In addition, after 6 months storage followed by mesh nebulization, all formulations demonstrated relatively comparable encapsulation states and IVR profiles (Fig. 2e). One unexplained finding related to this observation is why the pH 4.7 CFI preparation, with the most rapid IVR profile prior to nebulization (Fig. 2c), has an IVR profile comparable to those for the pH 4.9 and 5.2 preparations after mesh nebulization (Fig. 2e). While no explanation is evident, this result suggests that the mesh nebulization process has an effect on the low pH CFI formulation, even if that effect was only to make its IVR profile similar to that of the higher pH CFI formulations. Another interesting observation is that this change in IVR profile occurred not only for the collected aerosol sample which passed through the mesh, but also for the residual formulation remaining in the reservoir, upstream of the mesh. This phenomenon of alteration to a liposomal formulation upstream of the mesh (in addition to modification to the formulation which passed through the mesh), due to the energetics of the vibrating mesh, has been reported previously (2). Similar to our data for the pH = 4.7 formulation, liposomal formulations of salbutamol sulfate showed changes in vesicle size (14) and encapsulation (14,25) for the residual formulations in the nebulizer reservoirs.

CONCLUSIONS

We have demonstrated that the encapsulation state and IVR properties of a liposomal ciprofloxacin formulation, 12.5 mg/ml CFI containing 0.4% polysorbate 20, could be modified post manufacture by the addition of surfactant while still retaining acceptable long-term stability when formulated between a pH of 4.7 and 5.2. These modified formulations were nebulized using a vibrating mesh device to produce aerosols in the respirable size range, appropriate for delivery to the airways to treat lung disease. While there were small changes in the encapsulation state and vesicle size following mesh nebulization, these formulations retained a faster IVR profile than for the unmodified CFI control formulation. Future research efforts will focus on how the changes observed in the in vitro release rate translate in the in vivo setting. It may be possible one day to personalize inhaled therapy of liposomal formulations by selecting a surfactant, at a specified concentration, pH, and osmolarity, to achieve a specific, desired change in encapsulation state and/or IVR properties for a specific individual.