Multisource emission retrieval within a biogas plant based on inverse dispersion calculations--a real-life example.

Open digestate storage tanks were identified as one of the main methane (CH4) emitters of a biogas plant. The main purpose of this paper is to determine these emission rates using an inverse dispersion technique in conjunction with open-path tunable diode laser spectroscopy (OP-TDLS) concentration measurements for multisource reconstruction. Since the condition number, a measure of "ill-conditioned" matrices, strongly influences the accuracy of source reconstruction, it is used as a diagnostic of error sensitivity. The investigations demonstrate that the condition number for a given source-sensor configuration in the highly disturbed flow field within the plant significantly depends on the meteorological conditions (e.g., wind speed, stratification, wind direction, etc.). The CH₄ emissions are retrieved by removing unrepresentative periods with high condition numbers, which indicate uncertainty in recovering the individual sources. In a final step, the CH₄ emissions are compared with the maximum biological methane potential (BMP) in the digestate analyzed under laboratory conditions. The retrieved methane emission rates represent an average of 50% of the maximum BMP of the stored digestate in the winter months, while they comprised an average of 85% during the measurement campaigns in the summer months. The results indicate that the open tanks have the potential to represent a substantial emission source even during colder periods.