Literature DB >> 24855546

Solid Free-form Fabrication Technology and Its Application to Bone Tissue Engineering.

Jin Woo Lee1, Jong Young Kim2, Dong-Woo Cho3.   

Abstract

The development of scaffolds for use in cell-based therapies to repair damaged bone tissue has become a critical component in the field of bone tissue engineering. However, design of scaffolds using conventional fabrication techniques has limited further advancement, due to a lack of the required precision and reproducibility. To overcome these constraints, bone tissue engineers have focused on solid free-form fabrication (SFF) techniques to generate porous, fully interconnected scaffolds for bone tissue engineering applications. This paper reviews the potential application of SFF fabrication technologies for bone tissue engineering with respect to scaffold fabrication. In the near future, bone scaffolds made using SFF apparatus should become effective therapies for bone defects.

Entities:  

Keywords:  3D printing; Bone tissue engineering; Fused deposition modeling; Selective laser sintering; Solid free-form fabrication; Stereolithography

Year:  2010        PMID： 24855546      PMCID： PMC4021802          DOI： 10.15283/ijsc.2010.3.2.85

Source DB:  PubMed          Journal:  Int J Stem Cells        ISSN： 2005-3606            Impact factor:   2.500


  46 in total

Review 1.  Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs.

Authors:  K F Leong; C M Cheah; C K Chua
Journal:  Biomaterials       Date:  2003-06       Impact factor: 12.479

2.  Short communication: fused deposition models from CT scans.

Authors:  J R Meakin; D E T Shepherd; D W L Hukins
Journal:  Br J Radiol       Date:  2004-06       Impact factor: 3.039

Review 3.  Bone tissue engineering: state of the art and future trends.

Authors:  António J Salgado; Olga P Coutinho; Rui L Reis
Journal:  Macromol Biosci       Date:  2004-08-09       Impact factor: 4.979

4.  Room temperature synthesis of agarose/sol-gel glass pieces with tailored interconnected porosity.

Authors:  M V Cabañas; J Peña; J Román; M Vallet-Regí
Journal:  J Biomed Mater Res A       Date:  2006-09-01       Impact factor: 4.396

5.  Poly(propylene fumarate) bone tissue engineering scaffold fabrication using stereolithography: effects of resin formulations and laser parameters.

Authors:  Kee-Won Lee; Shanfeng Wang; Bradley C Fox; Erik L Ritman; Michael J Yaszemski; Lichun Lu
Journal:  Biomacromolecules       Date:  2007-02-28       Impact factor: 6.988

6.  Photo-polymerized microarchitectural constructs prepared by microstereolithography (muSL) using liquid acrylate-end-capped trimethylene carbonate-based prepolymers.

Authors:  Il Keun Kwon; Takehisa Matsuda
Journal:  Biomaterials       Date:  2005-05       Impact factor: 12.479

7.  Scaffold design and in vitro study of osteochondral coculture in a three-dimensional porous polycaprolactone scaffold fabricated by fused deposition modeling.

Authors:  Tong Cao; Kee-Hai Ho; Swee-Hin Teoh
Journal:  Tissue Eng       Date:  2003

8.  Polycaprolactone Scaffolds Fabricated via Bioextrusion for Tissue Engineering Applications.

Authors:  Marco Domingos; Dinuccio Dinucci; Stefania Cometa; Michele Alderighi; Paulo Jorge Bártolo; Federica Chiellini
Journal:  Int J Biomater       Date:  2009-09-08

9.  Biocompatibility and osteogenic potential of human fetal femur-derived cells on surface selective laser sintered scaffolds.

Authors:  Janos M Kanczler; Sayed-Hadi Mirmalek-Sani; Neil A Hanley; Alexander L Ivanov; John J A Barry; Clare Upton; Kevin M Shakesheff; Steven M Howdle; Eugeuni N Antonov; Victor N Bagratashvili; Vladimir K Popov; Richard O C Oreffo
Journal:  Acta Biomater       Date:  2009-03-17       Impact factor: 8.947

10.  Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique.

Authors:  T B F Woodfield; J Malda; J de Wijn; F Péters; J Riesle; C A van Blitterswijk
Journal:  Biomaterials       Date:  2004-08       Impact factor: 12.479
View more
  9 in total

Review 1.  Rapid prototyping technology and its application in bone tissue engineering.

Authors:  Bo Yuan; Sheng-Yuan Zhou; Xiong-Sheng Chen
Journal:  J Zhejiang Univ Sci B       Date:  2017 Apr.       Impact factor: 3.066

Review 2.  Personalized scaffolding technologies for alveolar bone regenerative medicine.

Authors:  Ning Yu; Trang Nguyen; Young D Cho; Nolan M Kavanagh; Iya Ghassib; William V Giannobile
Journal:  Orthod Craniofac Res       Date:  2019-05       Impact factor: 1.826

3.  Three-dimensional biofabrication of an aragonite-enriched self-hardening bone graft substitute and assessment of its osteogenicity in vitro and in vivo.

Authors:  Yunsong Shi; Ruijun He; Xiangyu Deng; Zengwu Shao; Davide Deganello; Chunze Yan; Zhidao Xia
Journal:  Biomater Transl       Date:  2020-12-28

Review 4.  Nanotechnology Treatment Options for Osteoporosis and Its Corresponding Consequences.

Authors:  Donglei Wei; Jinsuh Jung; Huilin Yang; David A Stout; Lei Yang
Journal:  Curr Osteoporos Rep       Date:  2016-10       Impact factor: 5.096

5.  Robocasting of Bioactive SiO2-P2O5-CaO-MgO-Na2O-K2O Glass Scaffolds.

Authors:  Francesco Baino; Jacopo Barberi; Elisa Fiume; Gissur Orlygsson; Jonathan Massera; Enrica Verné
Journal:  J Healthc Eng       Date:  2019-04-11       Impact factor: 2.682

6.  Recent advances in biomaterials for 3D scaffolds: A review.

Authors:  Maria P Nikolova; Murthy S Chavali
Journal:  Bioact Mater       Date:  2019-10-25

Review 7.  Additive Manufactured Polymers in Dentistry, Current State-of-the-Art and Future Perspectives-A Review.

Authors:  Codruta Victoria Tigmeanu; Lavinia Cosmina Ardelean; Laura-Cristina Rusu; Meda-Lavinia Negrutiu
Journal:  Polymers (Basel)       Date:  2022-09-03       Impact factor: 4.967

Review 8.  3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines.

Authors:  Claudia Di Bella; Amanda Fosang; Davide M Donati; Gordon G Wallace; Peter F M Choong
Journal:  Front Surg       Date:  2015-08-13

Review 9.  Research trends in biomimetic medical materials for tissue engineering: 3D bioprinting, surface modification, nano/micro-technology and clinical aspects in tissue engineering of cartilage and bone.

Authors:  Cen Chen; Sumi Bang; Younghak Cho; Sahnghoon Lee; Inseop Lee; ShengMin Zhang; Insup Noh
Journal:  Biomater Res       Date:  2016-05-04
  9 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.