Literature DB >> 24841149

Rapid-prototype endoprosthesis for palliative reconstruction of an upper extremity after resection of bone metastasis.

Dumnoensun Pruksakorn1, Nattapon Chantarapanich, Olarn Arpornchayanon, Taninit Leerapun, Kriskrai Sitthiseripratip, Natapoom Vatanapatimakul.   

Abstract

PURPOSE: To present a rapid-prototype (RP) endoprosthesis replacement after tumor resection in patients with bone metastasis of the upper extremity. The short-term complications and functional outcomes were evaluated as well as the survival of patients and endoprosthesis.
METHODS: Bone metastasis patients who required bone resection and endoprosthesis replacement were enrolled and consented before operation. Custom-made endoprosthesis was fabricated from polymethyl methacrylate assisted by RP technology. After surgery was performed, patients were followed up daily until discharge and monthly until 6 months postoperatively for immediate post-operative complications and for signs of endoprosthesis failure. The functional outcome was evaluated 6 months postoperatively by the Musculoskeletal Tumor Society score (MTSS) and the Mankin score. Thereafter, patients' survival and arm condition were monitored every 3 months.
RESULTS: Sixteen cases participated on this study. There were nine proximal-, four total- and two distal humerus, and one proximal ulna replacement. The median follow-up period was 486 days. The mean MTSS was 55 % and the Mankin score was good in 64 % and fair in 36 % of the patients. Glenohumeral subluxation was observed in 23 % of the patients; however, a stable shoulder was achieved in all cases. There were no prosthesis failure or systemic breakage.
CONCLUSIONS: An RP endoprosthesis may have significant advantages when the entire humerus needs to be replaced, or periarticular sites are involved. This technique offers custom-made endoprosthesis with enough durability, and in a relatively short production time at reasonable costs which are suitable for palliative reconstruction.

Entities:  

Mesh:

Year:  2014        PMID: 24841149     DOI: 10.1007/s11548-014-1072-2

Source DB:  PubMed          Journal:  Int J Comput Assist Radiol Surg        ISSN: 1861-6410            Impact factor:   2.924


  21 in total

1.  Soft tissue reconstruction of megaprostheses using a trevira tube.

Authors:  G Gosheger; A Hillmann; N Lindner; R Rödl; C Hoffmann; H Bürger; W Winkelmann
Journal:  Clin Orthop Relat Res       Date:  2001-12       Impact factor: 4.176

Review 2.  Failure mode classification for tumor endoprostheses: retrospective review of five institutions and a literature review.

Authors:  Eric R Henderson; John S Groundland; Elisa Pala; Jeremy A Dennis; Rebecca Wooten; David Cheong; Reinhard Windhager; Rainer I Kotz; Mario Mercuri; Philipp T Funovics; Francis J Hornicek; H Thomas Temple; Pietro Ruggieri; G Douglas Letson
Journal:  J Bone Joint Surg Am       Date:  2011-03-02       Impact factor: 5.284

3.  The results of total humeral replacement following excision for primary bone tumour.

Authors:  A Puri; A Gulia
Journal:  J Bone Joint Surg Br       Date:  2012-09

Review 4.  Use of rapid prototyping and three-dimensional reconstruction modeling in the management of complex fractures.

Authors:  Vaibhav Bagaria; Shirish Deshpande; Darshana D Rasalkar; Abhay Kuthe; Bhawan K Paunipagar
Journal:  Eur J Radiol       Date:  2011-01-22       Impact factor: 3.528

5.  Prognostic factors and a scoring system for patients with skeletal metastasis.

Authors:  H Katagiri; M Takahashi; K Wakai; H Sugiura; T Kataoka; K Nakanishi
Journal:  J Bone Joint Surg Br       Date:  2005-05

6.  Endoprosthetic replacement of the distal humerus following resection of bone tumours.

Authors:  S A Hanna; L A David; W J S Aston; P D Gikas; G W Blunn; S R Cannon; T W R Briggs
Journal:  J Bone Joint Surg Br       Date:  2007-11

7.  Osteoarticular and intercalary allograft transplantation in the management of malignant tumors of bone.

Authors:  H J Mankin; S H Doppelt; T R Sullivan; W W Tomford
Journal:  Cancer       Date:  1982-08-15       Impact factor: 6.860

8.  Proximal humerus reconstructions for tumors.

Authors:  Benjamin K Potter; Sheila C Adams; J David Pitcher; Theodore I Malinin; H Thomas Temple
Journal:  Clin Orthop Relat Res       Date:  2008-09-27       Impact factor: 4.176

9.  Computer-aided custom-made hemipelvic prosthesis used in extensive pelvic lesions.

Authors:  Ke-Rong Dai; Meng-Ning Yan; Zhen-An Zhu; Yue-Hua Sun
Journal:  J Arthroplasty       Date:  2007-10       Impact factor: 4.757

10.  Computer-assisted tumor surgery in malignant bone tumors.

Authors:  Kwok Chuen Wong; Shekhar Madhukar Kumta
Journal:  Clin Orthop Relat Res       Date:  2013-03       Impact factor: 4.176

View more
  7 in total

Review 1.  Medical 3D Printing for the Radiologist.

Authors:  Dimitris Mitsouras; Peter Liacouras; Amir Imanzadeh; Andreas A Giannopoulos; Tianrun Cai; Kanako K Kumamaru; Elizabeth George; Nicole Wake; Edward J Caterson; Bohdan Pomahac; Vincent B Ho; Gerald T Grant; Frank J Rybicki
Journal:  Radiographics       Date:  2015 Nov-Dec       Impact factor: 5.333

2.  Linked shoulder replacement: current design problems and a new design proposal.

Authors:  Ali Abdullah Mohammed; Simon Peter Frostick
Journal:  Musculoskelet Surg       Date:  2015-10-29

Review 3.  Joint replacement surgery for elbow tumours: a systematic review of outcomes.

Authors:  Gopikanthan Manoharan; Robert W Jordan; Georgios Orfanos; Manikandar S Cheruvu; Paul Cool; Stuart M Hay
Journal:  Shoulder Elbow       Date:  2021-05-20

Review 4.  What is the Optimal Reconstruction Option after the Resection of Proximal Humeral Tumors? A Systematic Review.

Authors:  Andrew Dubina; Brian Shiu; Mohit Gilotra; S Ashfaq Hasan; Daniel Lerman; Vincent Y Ng
Journal:  Open Orthop J       Date:  2017-03-22

5.  Repair of bone defects in rhesus monkeys with α1,3-galactosyltransferase-knockout pig cancellous bone.

Authors:  Wenhao Wang; Jiansen Lu; Ying Song; Chun Zeng; Yongkui Wang; Cheng Yang; Bin Huang; Yifan Dai; Jian Yang; Liangxue Lai; Liping Wang; Daozhang Cai; Xiaochun Bai
Journal:  Front Bioeng Biotechnol       Date:  2022-09-12

6.  Printing the Future-Updates in 3D Printing for Surgical Applications.

Authors:  Dekel Shilo; Omri Emodi; Ori Blanc; Dani Noy; Adi Rachmiel
Journal:  Rambam Maimonides Med J       Date:  2018-07-30

Review 7.  3D Printing of Physical Organ Models: Recent Developments and Challenges.

Authors:  Zhongboyu Jin; Yuanrong Li; Kang Yu; Linxiang Liu; Jianzhong Fu; Xinhua Yao; Aiguo Zhang; Yong He
Journal:  Adv Sci (Weinh)       Date:  2021-07-08       Impact factor: 16.806

  7 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.