Satu Rajala1, Jukka Lekkala2. 1. Department of Automation Science and Engineering, Tampere University of Technology, Korkeakoulunkatu 3, FI-33101 Tampere, Finland. Electronic address: satu.rajala@tut.fi. 2. Department of Automation Science and Engineering, Tampere University of Technology, Korkeakoulunkatu 3, FI-33101 Tampere, Finland.
Abstract
BACKGROUND: Mechanical stress at the plantar surface has two components, pressure acting normal to the surface and shear stress acting tangential to the surface. Typically only pressure is measured and reported. However, plantar shear stress also plays a major role, especially in diabetic ulceration. METHODS: During the last few decades, a variety of methods have been developed for the measurement of plantar shear stress. This paper reviews the technologies used in plantar shear stress measurements. FINDINGS: Several technologies have been used, e.g. magneto-resistors, strain gauges, optical methods, piezoelectric materials and capacitive sensors. Examples of plantar shear stress values measured with the developed devices are also collected here and the relationship between sensor characteristics and the measured plantar shear stress distribution is discussed. INTERPRETATION: Even with the limitations of current plantar shear stress measurement technologies, they can provide useful information on the plantar stress distribution.
BACKGROUND: Mechanical stress at the plantar surface has two components, pressure acting normal to the surface and shear stress acting tangential to the surface. Typically only pressure is measured and reported. However, plantar shear stress also plays a major role, especially in diabetic ulceration. METHODS: During the last few decades, a variety of methods have been developed for the measurement of plantar shear stress. This paper reviews the technologies used in plantar shear stress measurements. FINDINGS: Several technologies have been used, e.g. magneto-resistors, strain gauges, optical methods, piezoelectric materials and capacitive sensors. Examples of plantar shear stress values measured with the developed devices are also collected here and the relationship between sensor characteristics and the measured plantar shear stress distribution is discussed. INTERPRETATION: Even with the limitations of current plantar shear stress measurement technologies, they can provide useful information on the plantar stress distribution.
Authors: Peter A Lazzarini; Ryan T Crews; Jaap J van Netten; Sicco A Bus; Malindu E Fernando; Paul J Chadwick; Bijan Najafi Journal: J Diabetes Sci Technol Date: 2019-04-29