Literature DB >> 24794507

Acoustical characterization of polysaccharide polymers tissue-mimicking materials.

Rugiada Cuccaro1, Chiara Musacchio2, P Alberto Giuliano Albo3, Adriano Troia4, Simona Lago5.   

Abstract

Tissue-mimicking phantoms play a crucial role in medical ultrasound research because they can simulate biological soft tissues. In last years, many types of polymeric tissues have been proposed and characterized from an acoustical and a thermal point of view, but, rarely, a deep discussion about the quality of the measurements, in terms of the uncertainty evaluation, has been reported. In this work, considering the necessity to develop laboratory standards for the measurement of ultrasonic exposure and dose quantities, a detailed description of the experimental apparatuses for the sound speed and the attenuation coefficient measurements is given, focusing the attention on the uncertainty evaluation both of the results and analysis algorithms. In particular, this algorithm reveals a novel empirical relation, fixing a limit to the energy content (therefore limits the number of cycles) of the three parts in which the authors have proposed to divide the acoustical signal. Furthermore, the realisation of multi-components phantoms, Agar and Phytagel based tissue-mimicking gels along with others long chain molecules (dextrane or polyvinyl alcohol) and scattering materials (silicon carbide and kieselguhr) are investigated. This paper reports accurate speed of sound and attenuation coefficient measurements. Speed of sound is measured by a pulse-echo technique in far-field condition, using an optical glass buffer rod; while attenuation coefficient is determined by an insertion technique, using demineralized water as reference material. The experimental sound speed results are subjected to an overall estimated relative uncertainty of about 1.5% and the attenuation coefficient uncertainty is less than 2.5%. For the development of laboratory standards, a detailed analysis of the measurement uncertainty is fundamental to make sample properties comparable. The authors believe this study could represent the right direction to make phantoms characterizations referable and traceable.
Copyright © 2014 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Attenuation coefficient; Sound speed; Tissue-mimicking material; Ultrasound; Uncertainty evaluation

Mesh:

Substances:

Year:  2014        PMID: 24794507     DOI: 10.1016/j.ultras.2014.03.018

Source DB:  PubMed          Journal:  Ultrasonics        ISSN: 0041-624X            Impact factor:   2.890


  2 in total

1.  Speed of sound in rubber-based materials for ultrasonic phantoms.

Authors:  A Cafarelli; P Miloro; A Verbeni; M Carbone; A Menciassi
Journal:  J Ultrasound       Date:  2016-04-21

2.  Assessing heating distribution by therapeutic ultrasound on bone phantoms and in vitro human samples using infrared thermography.

Authors:  Gabriella Sellani; Dalila Fernandes; Abigail Nahari; Melissa Fabrício de Oliveira; Christiana Valois; Wagner C A Pereira; Christiano B Machado
Journal:  J Ther Ultrasound       Date:  2016-04-05
  2 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.