Literature DB >> 24750472

Removable partial dentures: use of rapid prototyping.

Julia Magalhaes Costa Lima1, Lilian Costa Anami, Rodrigo Maximo Araujo, Carlos A Pavanelli.   

Abstract

The CAD/CAM technology associated with rapid prototyping (RP) is already widely used in the fabrication of all-ceramic fixed prostheses and in the biomedical area; however, the use of this technology for the manufacture of metal frames for removable dentures is new. This work reports the results of a literature review conducted on the use of CAD/CAM and RP in the manufacture of removable partial dentures.
© 2014 by the American College of Prosthodontists.

Entities:  

Keywords:  CAD/CAM; Prototyping; dentistry

Mesh：

Substances：

Year:  2014        PMID： 24750472     DOI： 10.1111/jopr.12154

Source DB:  PubMed          Journal:  J Prosthodont        ISSN： 1059-941X            Impact factor:   2.752


  8 in total

Review 1.  Customized Post and Cores Fabricated with CAD/CAM Technology: A Literature Review.

Authors:  Faisal D Al-Qarni
Journal:  Int J Gen Med       Date:  2022-05-06

Review 2.  A Scoping Review on the Accuracy of Fit of Removable Partial Dentures in a Developing Digital Context.

Authors:  Noor Al Mortadi; Karem H Alzoubi; Robert Williams
Journal:  Clin Cosmet Investig Dent       Date:  2020-11-19

3.  Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods.

Authors:  Shruti Digholkar; V N V Madhav; Jayant Palaskar
Journal:  J Indian Prosthodont Soc       Date:  2016 Oct-Dec

4.  Comparison of Adaptation between the Major Connectors Fabricated from Intraoral Digital Impressions and Extraoral Digital Impressions.

Authors:  Ning Gan; Yaye Ruan; Jian Sun; Yaoyang Xiong; Ting Jiao
Journal:  Sci Rep       Date:  2018-01-11       Impact factor: 4.379

5.  Surface Hydrophilicity and Antifungal Properties of TiO2 Films Coated on a Co-Cr Substrate.

Authors:  Lijuan Huang; Shuanglin Jing; Ou Zhuo; Xiangfeng Meng; Xizhang Wang
Journal:  Biomed Res Int       Date:  2017-08-07       Impact factor: 3.411

6.  Realization of a Dental Framework by 3D Printing in Material Cobalt-Chromium with Superior Precision and Fitting Accuracy.

Authors:  André Edelmann; Lisa Riedel; Ralf Hellmann
Journal:  Materials (Basel)       Date:  2020-11-27       Impact factor: 3.623

Review 7.  3D Printing in Digital Prosthetic Dentistry: An Overview of Recent Developments in Additive Manufacturing.

Authors:  Josef Schweiger; Daniel Edelhoff; Jan-Frederik Güth
Journal:  J Clin Med       Date:  2021-05-07       Impact factor: 4.964

Review 8.  A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication.

Authors:  Mehmet Selim Bilgin; Ebru Nur Baytaroğlu; Ali Erdem; Erhan Dilber
Journal:  Eur J Dent       Date:  2016 Apr-Jun
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.