R Hoffmann 1 , J Bustamante 1 , C Pitsaer 2 , M Voigtländer 2 , M D Enderle 2 , C D Claussen 1 , S Clasen 1 , H Rempp 1 Show Affiliations »
Abstract
PURPOSE: Energy transfer from radiofrequency (RF) applicator to tissue is both precondition and limiting factor. The purpose of this ex vivo study was to examine the influence of form of energy delivery on ablation result during RF ablation with cryo-cooled applicators. MATERIALS AND METHODS: One hundred eight ablations were performed in ex vivo bovine liver under continuous energy delivery (A), pulsed energy delivery with reduced current during ablation pause (B) and impedance-dependent energy delivery. Maximum ablation time was 20 min. Early termination of ablation in case of loss of conductivity. Optimal ablation parameters were assessed. Short axis diameter of the ablation zone and ablation duration were determined. Ablation results under mode A, B and C were compared with analysis of variance and Tukey-Kramer HSD test. Influence of ablation duration on short axis diameter was evaluated with regression analysis. RESULTS: Significantly largest short axis diameter (51.1 mm ± SD 2.3; p = 0.01) was reached with impedance-dependent energy delivery (pulsed: 46.1 mm ± SD 5.6; continuous: 44.4 mm ± SD 4.1). Significantly longest ablation duration (1061.6 s ± SD 42.4; p = 0.01) was reached with impedance-dependent energy delivery (pulsed: 815.7 s ± 41.3; continuous: 715.3 s ± SD 82.2). Linear correlation between ablation duration and short axis diameter was calculated (R = 0.7). CONCLUSION: Modification of energy delivery during RF ablation with cryo-cooled applicators improves energy transfer to tissue and enables larger ablation zones. KEY POINTS: • Impedance-dependent energy delivery prevents early termination in kryo-based RF-ablation,• Impedance-dependent energy delivery enables larger ablation zones than continuous energy delivery,• Reduced current during ablation pause does not improve ablation results. © Georg Thieme Verlag KG Stuttgart · New York.
PURPOSE: Energy transfer from radiofrequency (RF) applicator to tissue is both precondition and limiting factor. The purpose of this ex vivo study was to examine the influence of form of energy delivery on ablation result during RF ablation with cryo-cooled applicators. MATERIALS AND METHODS: One hundred eight ablations were performed in ex vivo bovine liver under continuous energy delivery (A), pulsed energy delivery with reduced current during ablation pause (B) and impedance-dependent energy delivery. Maximum ablation time was 20 min. Early termination of ablation in case of loss of conductivity. Optimal ablation parameters were assessed. Short axis diameter of the ablation zone and ablation duration were determined. Ablation results under mode A, B and C were compared with analysis of variance and Tukey-Kramer HSD test. Influence of ablation duration on short axis diameter was evaluated with regression analysis. RESULTS: Significantly largest short axis diameter (51.1 mm ± SD 2.3; p = 0.01) was reached with impedance-dependent energy delivery (pulsed: 46.1 mm ± SD 5.6; continuous: 44.4 mm ± SD 4.1). Significantly longest ablation duration (1061.6 s ± SD 42.4; p = 0.01) was reached with impedance-dependent energy delivery (pulsed: 815.7 s ± 41.3; continuous: 715.3 s ± SD 82.2). Linear correlation between ablation duration and short axis diameter was calculated (R = 0.7). CONCLUSION: Modification of energy delivery during RF ablation with cryo-cooled applicators improves energy transfer to tissue and enables larger ablation zones. KEY POINTS: • Impedance-dependent energy delivery prevents early termination in kryo-based RF-ablation,• Impedance-dependent energy delivery enables larger ablation zones than continuous energy delivery,• Reduced current during ablation pause does not improve ablation results. © Georg Thieme Verlag KG Stuttgart · New York.
Entities: Species
Mesh： See more »
Year: 2014
PMID： 24691837 DOI： 10.1055/s-0034-1366232
Source DB: PubMed Journal: Rofo ISSN： 1438-9010