Khalid H Al-Samadani1. 1. Assistant Professor and Consultant, Department of Restorative Dental Science, College of Dentistry, Taibah University, Al Madinah Al Munawwarah 43353, Kingdom of Saudi Arabia, e-mail: kalsamadani@yahoo.com.
Abstract
OBJECTIVE: To study the effect of three energy drinks on the surface roughness of nanoflled composite resins after different periods of aging time. MATERIALS AND METHODS: Composite resin disks, 6 mm diameter, 3 mm thickness were prepared from Filtec Z350 XT, Tetric EvoCeram and Filtec Z250 XT. Specimens fr/8om each material were tested after aging with Red Bull, Bison and Power Horse energy drinks and distilled water as a control. Specimens were stored at 37°C in dark containers for 1, 3 and 6 months. Surface roughness Ra was assessed using a surface scanning interferometry before and after each storage period. Surface roughness differences ΔRa and Ra among specimens were measured. Mean values were statistically analyzed using multiple repeated measured (ANOVA), variance and multiple comparisons of the mean values were done with Bonferroni test, with p < 0.05 as signifcance level. RESULTS: The surface roughness degradation change ΔRa and Ra value before and after occurred by Red Bull, Bison and Power Horse energy drinks was signifcantly different for all tested materials at all three times p < 0.05. All specimens showed increase in surface roughness changes after aging periods of 1, 3 and 6 months. The highest total surface roughness difference ΔRa and Ra was found in the Red Bull group after 6 months. CONCLUSION: Energy drinks used in this study had surface degradation effect on the tested composite resin materials. The surface roughness increased with aging time however, it was clinically acceptable in all test groups after 6 months. The effect of energy drinks solutions on the surface roughness parameter of resin composites depends on type of solution and its acidity contents.
OBJECTIVE: To study the effect of three energy drinks on the surface roughness of nanoflled composite resins after different periods of aging time. MATERIALS AND METHODS: Composite resin disks, 6 mm diameter, 3 mm thickness were prepared from Filtec Z350 XT, Tetric EvoCeram and Filtec Z250 XT. Specimens fr/8om each material were tested after aging with Red Bull, Bison and Power Horse energy drinks and distilled water as a control. Specimens were stored at 37°C in dark containers for 1, 3 and 6 months. Surface roughness Ra was assessed using a surface scanning interferometry before and after each storage period. Surface roughness differences ΔRa and Ra among specimens were measured. Mean values were statistically analyzed using multiple repeated measured (ANOVA), variance and multiple comparisons of the mean values were done with Bonferroni test, with p < 0.05 as signifcance level. RESULTS: The surface roughness degradation change ΔRa and Ra value before and after occurred by Red Bull, Bison and Power Horse energy drinks was signifcantly different for all tested materials at all three times p < 0.05. All specimens showed increase in surface roughness changes after aging periods of 1, 3 and 6 months. The highest total surface roughness difference ΔRa and Ra was found in the Red Bull group after 6 months. CONCLUSION: Energy drinks used in this study had surface degradation effect on the tested composite resin materials. The surface roughness increased with aging time however, it was clinically acceptable in all test groups after 6 months. The effect of energy drinks solutions on the surface roughness parameter of resin composites depends on type of solution and its acidity contents.
Authors: Naman Vaidya; Pravin Kumar; Karishma Pathak; Sandhya K Punia; Ashish Choudhary; Arun K Patnana Journal: J Int Soc Prev Community Dent Date: 2020-09-28