Literature DB >> 24647505

Fretting and corrosion in modular-neck total hip arthroplasty femoral stems.

Dennis O Molloy1, Selin Munir1, Christopher M Jack1, Michael B Cross1, William L Walter1, William K Walter1.   

Abstract

BACKGROUND: During total hip arthroplasty, use of a modular femoral neck on a stemmed implant allows optimization of neck anteversion, length, and offset, resulting in more accurate balance. We performed a retrospective analysis of a consecutive cohort of patients who had undergone total hip arthroplasty with a modular-neck hip system with ceramic-on-ceramic bearings.
METHODS: We reviewed the results in fifteen patients who had received an ABG II dual modular hip system (Stryker Orthopaedics, Mahwah, New Jersey) from May 2007 to August 2008. Anteroposterior radiographs of the pelvis were reviewed and scored with regard to medial calcar erosion. Magnetic resonance imaging (MRI) was performed to assess for adverse local tissue reaction around the hip joint. Calcar resorption was correlated with subsequent MRI findings. Retrieval analysis was performed on the implants removed at revision.
RESULTS: The mean duration of follow-up for all patients was 42.3 months (range, thirty-three to sixty months). Cobalt-ion levels were elevated in all patients; chromium levels were within the normal range. Medial femoral calcar erosion was noted in seven of the fifteen cases. All patients with grade-2 or 3 calcar erosion on radiographs had positive MRI findings consistent with adverse local tissue reaction. At the time of writing, seven patients had undergone revision arthroplasty. Intraoperatively, tissue staining with tissue and bone necrosis and pseudotumor formation were observed in all revision cases. Histological analysis confirmed the presence of metal-on-metal synovitis, with changes similar to those seen with metal-on-metal bearings.
CONCLUSIONS: The ABG II dual modular hip system is associated with a high rate of early failure secondary to fretting and corrosion at the femoral neck-stem taper. The component has subsequently been recalled and is no longer in use. Surgeons using modular hip systems with a titanium stem and cobalt-chromium neck should be vigilant about annual follow-up with radiographs, and use of MRIs as indicated.

Entities:  

Mesh:

Substances:

Year:  2014        PMID: 24647505     DOI: 10.2106/JBJS.L.01625

Source DB:  PubMed          Journal:  J Bone Joint Surg Am        ISSN: 0021-9355            Impact factor:   5.284


  25 in total

1.  Revision for taper corrosion at the neck-body junction following total hip arthroplasty: pearls and pitfalls.

Authors:  Mitchell C Weiser; Darwin D Chen
Journal:  Curr Rev Musculoskelet Med       Date:  2016-03

2.  Cementless modular neck stems: are they a safe option in primary total hip arthroplasty?

Authors:  José M Pelayo-de-Tomás; José L Rodrigo-Pérez; Carlos D Novoa-Parra; Alejandro Lizaur-Utrilla; María Morales-Suárez-Varela; José Antonio Blas-Dobón
Journal:  Eur J Orthop Surg Traumatol       Date:  2017-10-29

3.  CORR Insights®: High early failure rate after cementless hip replacement in the octogenarian.

Authors:  Terence J Gioe
Journal:  Clin Orthop Relat Res       Date:  2014-05-09       Impact factor: 4.176

Review 4.  The biological response to orthopaedic implants for joint replacement: Part I: Metals.

Authors:  Emmanuel Gibon; Derek F Amanatullah; Florence Loi; Jukka Pajarinen; Akira Nabeshima; Zhenyu Yao; Moussa Hamadouche; Stuart B Goodman
Journal:  J Biomed Mater Res B Appl Biomater       Date:  2016-06-21       Impact factor: 3.368

5.  Fretting-corrosion in Hip Implant Modular Junctions: New Experimental Set-up and Initial Outcome.

Authors:  D Royhman; M Patel; M J Runa; J J Jacobs; N J Hallab; M A Wimmer; M T Mathew
Journal:  Tribol Int       Date:  2015-11-01       Impact factor: 4.872

6.  Trunnionosis: the latest culprit in adverse reactions to metal debris following hip arthroplasty.

Authors:  Ryan M Shulman; Michael G Zywiel; Rajiv Gandhi; J Roderick Davey; David C Salonen
Journal:  Skeletal Radiol       Date:  2014-08-12       Impact factor: 2.199

7.  Outcome of revision surgery for adverse local tissue reactions in patients with recalled total hip arthroplasty.

Authors:  Christian Klemt; Sakkadech Limmahakhun; Georges Bounajem; Christopher M Melnic; Michael J Harvey; Young-Min Kwon
Journal:  Arch Orthop Trauma Surg       Date:  2021-04-09       Impact factor: 2.928

8.  What Is the Risk of THA Revision for ARMD in Patients with Non-metal-on-metal Bearings? A Study from the Australian National Joint Replacement Registry.

Authors:  R N de Steiger; Alesha Hatton; Yi Peng; Stephen Graves
Journal:  Clin Orthop Relat Res       Date:  2020-06       Impact factor: 4.755

Review 9.  Titanium alloy femoral neck fracture--clinical and metallurgical analysis in 6 cases.

Authors:  Samo K Fokter; Rebeka Rudolf; Andrej Moličnik
Journal:  Acta Orthop       Date:  2015-05-04       Impact factor: 3.717

10.  Histopathological characterization of corrosion product associated adverse local tissue reaction in hip implants: a study of 285 cases.

Authors:  Benjamin F Ricciardi; Allina A Nocon; Seth A Jerabek; Gabrielle Wilner; Elianna Kaplowitz; Steven R Goldring; P Edward Purdue; Giorgio Perino
Journal:  BMC Clin Pathol       Date:  2016-02-27
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.