Literature DB >> 24518200

In vitro and in vivo evaluation of bone formation using solid freeform fabrication-based bone morphogenic protein-2 releasing PCL/PLGA scaffolds.

Tae-Hoon Kim1, Young-Pil Yun, Young-Eun Park, Suk-Ha Lee, Woonjae Yong, Joydip Kundu, Jin Woo Jung, Jin-Hyung Shim, Dong-Woo Cho, Sung Eun Kim, Hae-Ryong Song.   

Abstract

The aim of this study was to develop novel polycaprolactone/poly(lactic-co-glycolic acid) (PCL/PLGA) scaffolds with a heparin-dopamine (Hep-DOPA) conjugate for controlled release of bone morphogenic protein-2 (BMP-2) to enhance osteoblast activity in vitro and also bone formation in vivo. PCL/PLGA scaffolds were prepared by a solid freeform fabrication method. The PCL/PLGA scaffolds were functionalized with Hep-DOPA and then BMP-2 was sequentially coated onto the Hep-DOPA/PCL/PLGA scaffolds. The characterization and surface elemental composition of all scaffolds were evaluated by scanning electron microscope and x-ray photoelectron spectroscopy. The osteoblast activities on all scaffolds were assessed by cell proliferation, alkaline phosphatase (ALP) activity and calcium deposition in vitro. To demonstrate bone formation in vivo, plain radiograph, micro-computed tomography (micro-CT) evaluation and histological studies were performed after the implantation of all scaffolds on a rat femur defect. Hep-DOPA/PCL/PLGA had more controlled release of BMP-2, which was quantified by enzyme-linked immunosorbent assay, compared with Hep/PCL/PLGA. The in vitro results showed that osteoblast-like cells (MG-63 cells) grown on BMP-2/Hep-DOPA/PCL/PLGA had significantly enhanced ALP activity and calcium deposition compared with those on BMP-2/Hep/PCL/PLGA and PCL/PLGA. In addition, the plain radiograph, micro-CT evaluation and histological studies demonstrated that the implanted BMP-2/Hep-DOPA/PCL/PLGA on rat femur had more bone formation than BMP-2/Hep/PCL/PLGA and PCL/PLGA in vivo.

Entities:  

Mesh:

Substances:

Year:  2014        PMID: 24518200     DOI: 10.1088/1748-6041/9/2/025008

Source DB:  PubMed          Journal:  Biomed Mater        ISSN: 1748-6041            Impact factor:   3.715


  10 in total

Review 1.  Rapid prototyping technology and its application in bone tissue engineering.

Authors:  Bo Yuan; Sheng-Yuan Zhou; Xiong-Sheng Chen
Journal:  J Zhejiang Univ Sci B       Date:  2017 Apr.       Impact factor: 3.066

Review 2.  The Auxiliary Role of Heparin in Bone Regeneration and its Application in Bone Substitute Materials.

Authors:  Jing Wang; Lan Xiao; Weiqun Wang; Dingmei Zhang; Yaping Ma; Yi Zhang; Xin Wang
Journal:  Front Bioeng Biotechnol       Date:  2022-05-12

Review 3.  Multi-Dimensional Printing for Bone Tissue Engineering.

Authors:  Moyuan Qu; Canran Wang; Xingwu Zhou; Alberto Libanori; Xing Jiang; Weizhe Xu; Songsong Zhu; Qianming Chen; Wujin Sun; Ali Khademhosseini
Journal:  Adv Healthc Mater       Date:  2021-04-19       Impact factor: 11.092

Review 4.  Polydopamine-Assisted Surface Modification for Bone Biosubstitutes.

Authors:  Shishu Huang; Nuanyi Liang; Yang Hu; Xin Zhou; Noureddine Abidi
Journal:  Biomed Res Int       Date:  2016-08-09       Impact factor: 3.411

Review 5.  Bone tissue engineering via growth factor delivery: from scaffolds to complex matrices.

Authors:  Tinke-Marie De Witte; Lidy E Fratila-Apachitei; Amir A Zadpoor; Nicholas A Peppas
Journal:  Regen Biomater       Date:  2018-06-09

6.  Design of a 3D BMP-2-Delivering Tannylated PCL Scaffold and Its Anti-Oxidant, Anti-Inflammatory, and Osteogenic Effects In Vitro.

Authors:  Jae Yong Lee; Hyunwoong Lim; Jae Won Ahn; Dongsik Jang; Seung Hee Lee; Kyeongsoon Park; Sung Eun Kim
Journal:  Int J Mol Sci       Date:  2018-11-15       Impact factor: 5.923

7.  Optimization of Bone Scaffold Porosity Distributions.

Authors:  Patrina S P Poh; Dvina Valainis; Kaushik Bhattacharya; Martijn van Griensven; Patrick Dondl
Journal:  Sci Rep       Date:  2019-06-24       Impact factor: 4.379

Review 8.  Adjuvant Drug-Assisted Bone Healing: Advances and Challenges in Drug Delivery Approaches.

Authors:  Rebecca Rothe; Sandra Hauser; Christin Neuber; Markus Laube; Sabine Schulze; Stefan Rammelt; Jens Pietzsch
Journal:  Pharmaceutics       Date:  2020-05-06       Impact factor: 6.321

Review 9.  Recent Advances in Vertical Alveolar Bone Augmentation Using Additive Manufacturing Technologies.

Authors:  Cedryck Vaquette; Joshua Mitchell; Sašo Ivanovski
Journal:  Front Bioeng Biotechnol       Date:  2022-02-07

Review 10.  From the printer: Potential of three-dimensional printing for orthopaedic applications.

Authors:  Sze-Wing Mok; Razmara Nizak; Sai-Chuen Fu; Ki-Wai Kevin Ho; Ling Qin; Daniël B F Saris; Kai-Ming Chan; Jos Malda
Journal:  J Orthop Translat       Date:  2016-05-10       Impact factor: 5.191

  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.