Literature DB >> 24483140

Characterization of a resorbable poly(ester urethane) with biodegradable hard segments.

David K Dempsey1, Jennifer L Robinson, Ananth V Iyer, James P Parakka, Rao S Bezwada, Elizabeth M Cosgriff-Hernandez.   

Abstract

The rapid growth of regenerative medicine and drug delivery fields has generated a strong need for improved polymeric materials that degrade at a controlled rate into safe, non-cytotoxic by-products. Polyurethane thermoplastic elastomers offer several advantages over other polymeric materials including tunable mechanical properties, excellent fatigue strength, and versatile processing. The variable segmental chemistry in developing resorbable polyurethanes also enables fine control over the degradation profile as well as the mechanical properties. Linear aliphatic isocyanates are most commonly used in biodegradable polyurethane formulations; however, these aliphatic polyurethanes do not match the mechanical properties of their aromatic counterparts. In this study, a novel poly(ester urethane) (PEsU) synthesized with biodegradable aromatic isocyanates based on glycolic acid was characterized for potential use as a new resorbable material in medical devices. Infrared spectral analysis confirmed the aromatic and phase-separated nature of the PEsU. Uniaxial tensile testing displayed stress-strain behavior typical of a semi-crystalline polymer above its Tg, in agreement with calorimetric findings. PEsU outperformed aliphatic PCL-based polyurethanes likely due to the enhanced cohesion of the aromatic hard domains. Accelerated degradation of the PEsU using 0.1 M sodium hydroxide resulted in hydrolysis of the polyester soft segment on the surface, reduced molecular weight, surface cracking, and a 30% mass loss after four weeks. Calorimetric studies indicated a disruption of the soft segment crystallinity after incubation which corresponded with a drop in initial modulus of the PEsU. Finally, cytocompatibility testing with 3T3 mouse fibroblasts exhibited cell viability on PEsU films comparable to a commercial poly(ether urethane urea) after 24 h followed by 85% cell viability at 72 h. Overall, this new resorbable polyurethane shows strong potential for use in wide range of biomedical applications.

Entities:  

Mesh:

Substances:

Year:  2014        PMID: 24483140     DOI: 10.1080/09205063.2014.880247

Source DB:  PubMed          Journal:  J Biomater Sci Polym Ed        ISSN: 0920-5063            Impact factor:   3.517


  3 in total

Review 1.  Biomaterials to Mimic and Heal Connective Tissues.

Authors:  Benjamin R Freedman; David J Mooney
Journal:  Adv Mater       Date:  2019-03-25       Impact factor: 30.849

2.  Current Status of Tissue-Engineered Scaffolds for Rotator Cuff Repair.

Authors:  Abby Chainani; Dianne Little
Journal:  Tech Orthop       Date:  2016-06

3.  Concomitant control of mechanical properties and degradation in resorbable elastomer-like materials using stereochemistry and stoichiometry for soft tissue engineering.

Authors:  Mary Beth Wandel; Craig A Bell; Jiayi Yu; Maria C Arno; Nathan Z Dreger; Yen-Hao Hsu; Anaïs Pitto-Barry; Joshua C Worch; Andrew P Dove; Matthew L Becker
Journal:  Nat Commun       Date:  2021-01-19       Impact factor: 14.919

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.