Literature DB >> 24384581

Experimental validation of finite element analysis of human vertebral collapse under large compressive strains.

Hadi S Hosseini, Allison L Clouthier, Philippe K Zysset.   

Abstract

Osteoporosis-related vertebral fractures represent a major health problem in elderly populations. Such fractures can often only be diagnosed after a substantial deformation history of the vertebral body. Therefore, it remains a challenge for clinicians to distinguish between stable and progressive potentially harmful fractures. Accordingly, novel criteria for selection of the appropriate conservative or surgical treatment are urgently needed. Computer tomography-based finite element analysis is an increasingly accepted method to predict the quasi-static vertebral strength and to follow up this small strain property longitudinally in time. A recent development in constitutive modeling allows us to simulate strain localization and densification in trabecular bone under large compressive strains without mesh dependence. The aim of this work was to validate this recently developed constitutive model of trabecular bone for the prediction of strain localization and densification in the human vertebral body subjected to large compressive deformation. A custom-made stepwise loading device mounted in a high resolution peripheral computer tomography system was used to describe the progressive collapse of 13 human vertebrae under axial compression. Continuum finite element analyses of the 13 compression tests were realized and the zones of high volumetric strain were compared with the experiments. A fair qualitative correspondence of the strain localization zone between the experiment and finite element analysis was achieved in 9 out of 13 tests and significant correlations of the volumetric strains were obtained throughout the range of applied axial compression. Interestingly, the stepwise propagating localization zones in trabecular bone converged to the buckling locations in the cortical shell. While the adopted continuum finite element approach still suffers from several limitations, these encouraging preliminary results towards the prediction of extended vertebral collapse may help in assessing fracture stability in future work.

Entities:  

Mesh:

Year:  2014        PMID: 24384581     DOI: 10.1115/1.4026409

Source DB:  PubMed          Journal:  J Biomech Eng        ISSN: 0148-0731            Impact factor:   2.097


  8 in total

1.  Modelling of bone fracture and strength at different length scales: a review.

Authors:  Fereshteh A Sabet; Ahmad Raeisi Najafi; Elham Hamed; Iwona Jasiuk
Journal:  Interface Focus       Date:  2016-02-06       Impact factor: 3.906

2.  Trabecular bone loss at a distant skeletal site following noninvasive knee injury in mice.

Authors:  Blaine A Christiansen; Armaun J Emami; David P Fyhrie; Patrick B Satkunananthan; Michael R Hardisty
Journal:  J Biomech Eng       Date:  2015-01       Impact factor: 2.097

3.  Accuracy of finite element analyses of CT scans in predictions of vertebral failure patterns under axial compression and anterior flexion.

Authors:  Timothy M Jackman; Alex M DelMonaco; Elise F Morgan
Journal:  J Biomech       Date:  2015-12-11       Impact factor: 2.712

4.  Effect of fabric on the accuracy of computed tomography-based finite element analyses of the vertebra.

Authors:  Yuanqiao Wu; Elise F Morgan
Journal:  Biomech Model Mechanobiol       Date:  2019-09-10

5.  Differences in Trabecular Microarchitecture and Simplified Boundary Conditions Limit the Accuracy of Quantitative Computed Tomography-Based Finite Element Models of Vertebral Failure.

Authors:  Amira I Hussein; Daniel T Louzeiro; Ginu U Unnikrishnan; Elise F Morgan
Journal:  J Biomech Eng       Date:  2018-02-01       Impact factor: 2.097

6.  Effect of including damage at the tissue level in the nonlinear homogenisation of trabecular bone.

Authors:  Francesc Levrero-Florencio; Krishnagoud Manda; Lee Margetts; Pankaj Pankaj
Journal:  Biomech Model Mechanobiol       Date:  2017-05-12

7.  Biomechanical effects of different vertebral heights after augmentation of osteoporotic vertebral compression fracture: a three-dimensional finite element analysis.

Authors:  Wen-Tao Zhao; Da-Ping Qin; Xiao-Gang Zhang; Zhi-Peng Wang; Zun Tong
Journal:  J Orthop Surg Res       Date:  2018-02-08       Impact factor: 2.359

Review 8.  Digital volume correlation for the characterization of musculoskeletal tissues: Current challenges and future developments.

Authors:  Enrico Dall'Ara; Gianluca Tozzi
Journal:  Front Bioeng Biotechnol       Date:  2022-10-04
  8 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.