Characterization and optimization of glycerol/sebacate ratio in poly(glycerol-sebacate) elastomer for cell culture application.

Poly(glycerol-sebacate) (PGS) is an elastomeric biodegradable polyester. Our previous series of studies have showed that PGS has good biocompatibility. In view of the potential use of PGS in bioengineering, we attempt to characterize the PGS polymer with different ratio of glycerol and sebacic acid, and the cell adhesion and growth on these polymers. PGSs with different proportion of glycerol and sebacic acid were synthesized by polycondensation reaction. The microstructure of the series PGSs were characterized by infrared spectroscopy and X-ray diffraction analysis (XRD). Results showed that, with the increase of the ratio of sebacic acid in PGS from 1:0.8, 1:1, to 1:1.2 (ratio of glycerol to sebacic acid), the main diffraction peak in XRD, the sol content and gel swelling increased but then decreased, suggesting that the degree of crosslinking and the inherent degree of order of the series PGS increased and then decreased. With the increase of sebacic acid proportion, water absorption increased and then decreased, and the water absorption ranged from 9.62% to 10.66%. The mass loss of the series of samples in degradation experiments ranged from 24.63% to 40.06% on the 32nd day of degradation. Cell culture data suggested that the polymer with the ratio of 1:0.8 for glycerol and sebacate was suitable for cell adhesion and growth. In conclusion, PGS can be used as the cell culture matrix by modifying the composition ratio of glycerol and sebacic acid to improve the properties of cell adhesion and growth.