OBJECTIVE: To compare the delivery and retention of triclosan in dental plaque, and to compare the antibacterial efficacy of a newly developed toothpaste to a marketed calcium carbonate toothpaste. METHODS: Two clinical delivery/retention studies were carried out to determine the concentration of triclosan in plaque 10 minutes, and two and four hours after brushing with a new triclosan-containing toothpaste with magnesium aluminium silicate or a marketed triclosan-containing toothpaste. Both studies had a double-blind, randomized, complete cross-over design. Supragingival plaque samples (minimum 2 microg) were taken from smooth surfaces of all teeth (1-7) in all four quadrants for the 10-minute plaque measurements and in two randomly allocated quadrants at the two- and four-hour time points. Triclosan concentration was measured by HPLC. Antibacterial efficacy was evaluated in vitro using a biofilm formation approach. Three replicate experiments were carried out to check for repeatability and consistency of the assay. Toothpaste slurries were prepared by stirring one part by weight of each toothpaste with two parts by weight of deionized water. An overnight culture suspension of Streptococcus mutans (ATCC 25175) was prepared and then adjusted to give a bacterial count of approximately 10(7) CFU/ml. Sterile HAP discs were used as substrate and treated with the toothpaste slurry before inoculation with the standardized culture suspension of S. mutans. Following incubation in brain heart infusion (BHI) broth containing 2% sucrose for four hours, standard Total Viable Count (TVC) procedures were carried out and colonies counted (log10 values). RESULTS: Brushing with the new calcium carbonate/triclosan toothpaste resulted in a higher triclosan concentration in plaque after 10 minutes, and two and four hours compared to a marketed triclosan toothpaste. The increase ranged from 14% to 35% and was statistically significant (p < 0.05). The antibacterial efficacy of the new calcium carbonate/triclosan toothpaste, measured four hours after application, was greater than that of a marketed toothpaste with 0.3% triclosan. The difference was statistically significant (p < 0.05). CONCLUSION: The new calcium carbonate toothpaste with 0.3% triclosan and magnesium aluminium silicate demonstrated significantly greater efficacy four hours post-brushing both in terms of in vivo delivery and in vitro antibacterial action compared to a marketed calcium carbonate toothpaste with 0.3% triclosan.
RCT Entities:
OBJECTIVE: To compare the delivery and retention of triclosan in dental plaque, and to compare the antibacterial efficacy of a newly developed toothpaste to a marketed calcium carbonate toothpaste. METHODS: Two clinical delivery/retention studies were carried out to determine the concentration of triclosan in plaque 10 minutes, and two and four hours after brushing with a new triclosan-containing toothpaste with magnesium aluminium silicate or a marketed triclosan-containing toothpaste. Both studies had a double-blind, randomized, complete cross-over design. Supragingival plaque samples (minimum 2 microg) were taken from smooth surfaces of all teeth (1-7) in all four quadrants for the 10-minute plaque measurements and in two randomly allocated quadrants at the two- and four-hour time points. Triclosan concentration was measured by HPLC. Antibacterial efficacy was evaluated in vitro using a biofilm formation approach. Three replicate experiments were carried out to check for repeatability and consistency of the assay. Toothpaste slurries were prepared by stirring one part by weight of each toothpaste with two parts by weight of deionized water. An overnight culture suspension of Streptococcus mutans (ATCC 25175) was prepared and then adjusted to give a bacterial count of approximately 10(7) CFU/ml. Sterile HAP discs were used as substrate and treated with the toothpaste slurry before inoculation with the standardized culture suspension of S. mutans. Following incubation in brain heart infusion (BHI) broth containing 2% sucrose for four hours, standard Total Viable Count (TVC) procedures were carried out and colonies counted (log10 values). RESULTS: Brushing with the new calcium carbonate/triclosan toothpaste resulted in a higher triclosan concentration in plaque after 10 minutes, and two and four hours compared to a marketed triclosan toothpaste. The increase ranged from 14% to 35% and was statistically significant (p < 0.05). The antibacterial efficacy of the new calcium carbonate/triclosan toothpaste, measured four hours after application, was greater than that of a marketed toothpaste with 0.3% triclosan. The difference was statistically significant (p < 0.05). CONCLUSION: The new calcium carbonate toothpaste with 0.3% triclosan and magnesium aluminium silicate demonstrated significantly greater efficacy four hours post-brushing both in terms of in vivo delivery and in vitro antibacterial action compared to a marketed calcium carbonate toothpaste with 0.3% triclosan.
Authors: Erica M Hartmann; Roxana Hickey; Tiffany Hsu; Clarisse M Betancourt Román; Jing Chen; Randall Schwager; Jeff Kline; G Z Brown; Rolf U Halden; Curtis Huttenhower; Jessica L Green Journal: Environ Sci Technol Date: 2016-09-07 Impact factor: 9.028
Authors: Elizabeth Bilsland; Liisa van Vliet; Kevin Williams; Jack Feltham; Marta P Carrasco; Wesley L Fotoran; Eliana F G Cubillos; Gerhard Wunderlich; Morten Grøtli; Florian Hollfelder; Victoria Jackson; Ross D King; Stephen G Oliver Journal: Sci Rep Date: 2018-01-18 Impact factor: 4.379