Carbon-deposited TiO2 3D inverse opal photocatalysts: visible-light photocatalytic activity and enhanced activity in a viscous solution.

We for the first time demonstrated carbon-deposited TiO2 inverse opal (C-TiO2 IO) structures as highly efficient visible photocatalysts. The carbon deposition proceeded via high-temperature pyrolysis of phloroglucinol/formaldehyde resol, which had been coated onto the TiO2 IO structures. Carbon deposition formed a carbon layer and doped the TiO2 interface, which synergistically enhanced visible-light absorption. We directly measured the visible-light photocatalytic activity by constructing solar cells comprising the C-TiO2 IO electrode. Photocatalytic degradation of organic dyes in a solution was also evaluated. Photocatalytic dye degradation under visible light was only observed in the presence of the C-TiO2 IO sample and was increased with the content of carbon deposition. The IO structures could be readily decorated with TiO2 nanoparticles to increase the surface area and enhance the photocatalytic activity. Notably, the photocatalytic reaction was found to proceed in a viscous polymeric solution. A comparison of the mesoporous TiO2 structure and the IO TiO2 structure revealed that the latter performed better as the solution viscosity increased. This result was attributed to facile diffusion into the fully connected and low-tortuosity macropore network of the IO structure.