Optofluidic microreactors with TiO2-coated fiberglass.

Optofluidic microreactors are promising prospects for photocatalytic reactions. However, because the flow type in conventional designs is typically laminar, the mass transport mainly relies on diffusion, and thus the rate of mass transport is limited. Accordingly, poor mass transport reduces the photocatalytic reaction rate. To alleviate the limitation of mass transport, in this work, we proposed a novel optofluidic microreactor with TiO2-coated fiberglasses immersed in the microreaction chamber. Such a design enables enhanced mass transport by shortening the transport length and inducing the perturbation to liquid flow so as to improve the performance. We demonstrated the feasibility of the optofluidic microreactor with the TiO2-coated fiberglass by the photocatalytic water treatment of methylene blue under UV irradiation. Results showed that the proposed optofluidic microreactor yielded much higher degradation efficiency than did the conventional optofluidic microreactor as a result of enhanced mass transport. The microreactor with the TiO2-coated fiberglass showed a 2-3-fold improvement in the reaction rate constant as opposed to conventional ones. The maximal increment of the degradation efficiency can reach more than 40%.