PURPOSE: To evaluate the marginal and internal adaptation of five-unit implant-supported fixed partial dentures with different superstructure and abutment materials with two different implant systems. MATERIALS AND METHODS: Two mandibular epoxy resin models (one for each implant system) were fabricated, and implants were inserted in the canine, first premolar, and first molar regions. Thirty impressions of each model were then made. The 30 models of each group were divided into three subgroups: group 1, titanium abutment with metal (nickel-chromium) framework; group 2, titanium abutment with zirconium framework; and group 3, zirconium abutment with zirconium framework. The replica technique was used to examine the marginal and internal gap values. For each restoration, 20 measurements were performed, and the data were evaluated statistically using analysis of variance and the least significant difference post hoc test. RESULTS: The highest values for internal adaptation were observed at the occlusal surface in all groups. There were statistically significant differences in marginal measurements between subgroups. The smallest gaps were found in group 1 (79.361 μm), and the largest gaps were found in group 3 (131.242 μm). CONCLUSIONS: In this study, marginal and internal gap measurements were 79 to 131 μm. The marginal discrepancy of the tested materials could be considered clinically acceptable.
PURPOSE: To evaluate the marginal and internal adaptation of five-unit implant-supported fixed partial dentures with different superstructure and abutment materials with two different implant systems. MATERIALS AND METHODS: Two mandibular epoxy resin models (one for each implant system) were fabricated, and implants were inserted in the canine, first premolar, and first molar regions. Thirty impressions of each model were then made. The 30 models of each group were divided into three subgroups: group 1, titanium abutment with metal (nickel-chromium) framework; group 2, titanium abutment with zirconium framework; and group 3, zirconium abutment with zirconium framework. The replica technique was used to examine the marginal and internal gap values. For each restoration, 20 measurements were performed, and the data were evaluated statistically using analysis of variance and the least significant difference post hoc test. RESULTS: The highest values for internal adaptation were observed at the occlusal surface in all groups. There were statistically significant differences in marginal measurements between subgroups. The smallest gaps were found in group 1 (79.361 μm), and the largest gaps were found in group 3 (131.242 μm). CONCLUSIONS: In this study, marginal and internal gap measurements were 79 to 131 μm. The marginal discrepancy of the tested materials could be considered clinically acceptable.
Authors: John Eversong Lucena de Vasconcelos; Jefferson David Melo de Matos; Daher Antonio Queiroz; Guilherme da Rocha Scalzer Lopes; Bruna Caroline Gonçalves Vasconcelos de Lacerda; Marco Antonio Bottino; Cecilia Pedroso Turssi; Roberta Tarkany Basting; Flávia Lucisano Botelho do Amaral; Fabiana Mantovani Gomes França Journal: Materials (Basel) Date: 2022-08-03 Impact factor: 3.748