Literature DB >> 24064549

Tracing biofouling to the structure of the microbial community and its metabolic products: a study of the three-stage MBR process.

Dawen Gao1, Yuan Fu, Nanqi Ren.   

Abstract

The biofouling characteristics of a sequential anoxic/aerobic-membrane bioreactor (A/O MBR) were analyzed during the three-stage process (fast-slow-fast transmembrane pressure (TMP) increasing). The results indicated: during the stage 1 (before day 1), the microbial communities in the activated sludge (AS), cake sludge (CS) and biofilm (BF) were similar to each other, and the adsorption of microbes and the metabolic products was the main factor that led to TMP increase; during the stage 2 (between day 1 and day 7), the cake layer begun to form and the TMP continued to rise gradually at a reduced rate compared to stage 1, at this point a characteristic microbial community colonized the CS with microorganisms such as Saprospiraceae and Comamonadaceae thriving on the membrane surface (BF) probably due to greater nutrient availability, and the predominance of these species in the microbial population led to the accumulation of biofouling metabolic products in the CS, which resulted in membrane fouling and the associated rise in TMP; during the final stage (after day 7), the biofilm had matured, and the activity of anaerobes stimulated cake compaction. The statistical analysis showed a correlation between the TMP changing rate and the carbonhydrates of soluble microbial products (SMPc) content in the CS. When the SMPc concentration rose slowly there was a low level of biofouling. However, when the SMPc accumulating rate was greater, it resulted in the more severe biofouling associated with the TMP jump. Furthermore, the correlation coefficient for the TMP increase and protein concentrations of extracellular polymeric substances (EPSp) in the CS was highly significant. The cluster analysis suggested that the AS microbial community remained stable during the three TMP change stages, while the CS and BF community were changed accompanied with the TMP change. The interaction between the microbial communities and the metabolic products lead to the significant correlation between them. The EPSp in conjunction with the SMPc were the main factors that accelerate the membrane fouling. The rapid rise of SMPc triggered a sudden increase in the TMP, while the accumulation of EPSp caused the sustained rise in TMP.
Copyright © 2013 Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Membrane bioreactor; Membrane fouling; Microbial community; Polymeric substances (EPS); Soluble microbial products (SMP); Trans-membrane pressure

Mesh:

Substances:

Year:  2013        PMID: 24064549     DOI: 10.1016/j.watres.2013.09.007

Source DB:  PubMed          Journal:  Water Res        ISSN: 0043-1354            Impact factor:   11.236


  6 in total

1.  Dynamics of the physiochemical and community structures of biofilms under the influence of algal organic matter and humic substances.

Authors:  Lei Li; Youchul Jeon; Sang-Hoon Lee; Hodon Ryu; Jorge W Santo Domingo; Youngwoo Seo
Journal:  Water Res       Date:  2019-04-10       Impact factor: 11.236

2.  Role of live cell colonization in the biofilm formation process in membrane bioreactors treating actual sewage under low organic loading rate conditions.

Authors:  Toru Miwa; Yuya Takimoto; Masashi Hatamoto; Daiki Kuratate; Takahiro Watari; Takashi Yamaguchi
Journal:  Appl Microbiol Biotechnol       Date:  2021-01-22       Impact factor: 4.813

3.  Characterization of activated sludge flocs in membrane bioreactor: stable and unstable flocs.

Authors:  Yifei Sang; Shengli Wang; Lianfa Song; Jingbo Guo; Lanhe Zhang; Haifeng Zhang
Journal:  Environ Sci Pollut Res Int       Date:  2019-09-04       Impact factor: 4.223

4.  Dynamics of the Fouling Layer Microbial Community in a Membrane Bioreactor.

Authors:  Anja S Ziegler; Simon J McIlroy; Poul Larsen; Mads Albertsen; Aviaja A Hansen; Nicolas Heinen; Per Halkjær Nielsen
Journal:  PLoS One       Date:  2016-07-11       Impact factor: 3.240

5.  Fouling Development in A/O-MBR under Low Organic Loading Condition and Identification of Key Bacteria for Biofilm Formations.

Authors:  Yuya Takimoto; Masashi Hatamoto; Takaya Ishida; Takahiro Watari; Takashi Yamaguchi
Journal:  Sci Rep       Date:  2018-07-30       Impact factor: 4.379

6.  Characterization of the Initial Fouling Layer on the Membrane Surface in a Membrane Bioreactor: Effects of Permeation Drag.

Authors:  Shengli Wang; Xin Lu; Lanhe Zhang; Jingbo Guo; Haifeng Zhang
Journal:  Membranes (Basel)       Date:  2019-09-17
  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.