Literature DB >> 24033745

Assessment of the craniocaudal stability of four extracapsular stabilization techniques during two cyclic loading protocols: a cadaver study.

Christina J Choate1, Daniel D Lewis, Bryan P Conrad, Mary Beth Horodyski, Antonio Pozzi.   

Abstract

OBJECTIVE: To (1) compare the effect of cyclic loading on craniocaudal tibial translation in cranial cruciate ligament (CrCL)-deficient stifles after extracapsular stabilization, and (2) evaluate the effect of peak force during cyclic loading on the rate of development of craniocaudal laxity. STUDY
DESIGN: Biomechanical cadaveric study. SAMPLE POPULATION: Cadaveric pelvic limbs (n = 24 pairs) from skeletally mature dogs.
METHODS: Twenty-four pairs of stifles were randomly assigned to 4 stabilization groups: nylon leader lateral circumfabellar-tibial suture (NLS); FiberTape lateral circumfabellar-tibial suture (FTLS); TightRope (TR); or bone anchor (BA). Contralateral limbs were cyclically loaded to produce cranial tibial translation at peak forces of either 80 or 160 N. Craniocaudal displacement of the tibia was measured with a mechanical testing machine during cyclic loading with the CrCL intact, after CrCL transection, and after extracapsular stabilization. The number of cycles each construct underwent before reaching 200% and 300% of the mean craniocaudal displacement present during cyclic loading of the CrCL-intact stifles was calculated. Number of cycles among treatment groups was compared with a Kruskal-Wallis test. P < .05 was considered significant.
RESULTS: Mean ± SD translation before and after CrCL transection were 3.9 ± 0.6 and 14.6 ± 1.7 mm, respectively. TR constructs resisted significantly more cycles than NLS constructs before reaching 7.8 mm (200%) and 11.7 mm (300%) of translation when loaded to 80 N. No other differences between constructs were significant at a peak load of 80 N. All constructs reached 7.8 and 11.7 mm of translation in fewer cycles when loaded to 160 N than at 80 N.
CONCLUSIONS: TR constructs were most resistant to elongation during cyclic loading. Doubling the peak force during cyclic loading significantly decreased the number of cycles constructs withstood, supporting recommendations for restricting postoperative activity after extracapsular stabilization of the CrCL-deficient stifle. © Copyright 2013 by The American College of Veterinary Surgeons.

Entities:  

Mesh:

Year:  2013        PMID: 24033745     DOI: 10.1111/j.1532-950X.2013.12049.x

Source DB:  PubMed          Journal:  Vet Surg        ISSN: 0161-3499            Impact factor:   1.495


  4 in total

1.  Three-dimensional kinematic evaluation of Tightrope CCL in a canine in vitro cranial cruciate deficient stifle model.

Authors:  Mathieu Laugier; Jaëlle Tremblay; Yvan Petit; Alexandre Grignon-Lemieux; Annie Levasseur; Bertrand Lussier
Journal:  Can J Vet Res       Date:  2019-10       Impact factor: 1.310

2.  3D FSE Cube and VIPR-aTR 3.0 Tesla magnetic resonance imaging predicts canine cranial cruciate ligament structural properties.

Authors:  Molly Racette; Habib Al saleh; Kenneth R Waller; Jason A Bleedorn; Ronald P McCabe; Ray Vanderby; Mark D Markel; Sabrina H Brounts; Walter F Block; Peter Muir
Journal:  Vet J       Date:  2015-11-04       Impact factor: 2.688

3.  Three-dimensional kinematic evaluation of lateral suture stabilization in an in vitro canine cranial cruciate deficient stifle model.

Authors:  Laura-Isabela Del Carpio; Yvan Petit; Lucien Diotalevi; Elisabeth Laroche; Annie Levasseur; Bertrand Lussier
Journal:  PLoS One       Date:  2021-12-20       Impact factor: 3.240

4.  Biomechanical cyclic loading test of a synthetic ligament fixation system used for intra-articular stabilization of deficient canine stifles.

Authors:  Bastien Goin; Philippe Buttin; Yoann Lafon; Michel Massenzio; Eric Viguier; Thibaut Cachon
Journal:  Open Vet J       Date:  2022-05-29
  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.