Literature DB >> 24021231

Visible light cured thiol-vinyl hydrogels with tunable degradation for 3D cell culture.

Yiting Hao1, Han Shih, Zachary Muňoz, Arika Kemp, Chien-Chi Lin.   

Abstract

We report here a synthetically simple yet highly tunable and diverse visible light mediated thiol-vinyl gelation system for fabricating cell-instructive hydrogels. Gelation was achieved via a mixed-mode step-and-chain-growth photopolymerization using functionalized 4-arm poly(ethylene glycol) as backbone macromer, eosin-Y as photosensitizer, and di-thiol containing molecule as dual purpose co-initiator/cross-linker. N-vinylpyrrolidone (NVP) was used to accelerate gelation kinetics and to adjust the stiffness of the hydrogels. Visible light (wavelength: 400-700 nm) was used to initiate rapid gelation (gel points: ~20s) that reached completion within a few minutes. The major differences between current thiol-vinyl gelation and prior visible light mediated photopolymerization are that: (1) the co-initiator triethanolamine (TEA) used in the previous systems was replaced with multifunctional thiols and (2) mixed-mode polymerized gels contain less network heterogeneity. The gelation kinetics and gel properties at the same PEG macromer concentration could be tuned by changing the identity of vinyl groups and di-thiol cross-linkers, as well as concentration of cross-linker and NVP. Specifically, acrylate-modified PEG afforded the fastest gelation rate, followed by acrylamide and methacrylate-functionalized PEG. Increasing NVP concentration also accelerated gelation and led to a higher network cross-linking density. Further, increasing di-thiol peptide concentration in the gel formulation increased hydrogel swelling and decreased gel stiffness. Due to the formation of thiol-ether-ester bonds following thiol-acrylate reaction, the gels degraded hydrolytically following a pseudo first order degradation kinetics. Degradation rate was controlled by adjusting thiol or NVP content in the polymer precursor solution. The cytocompatibility and utility of this hydrogel system were evaluated using in situ encapsulation of human mesenchymal stem cells (hMSC). Encapsulated hMSCs remained alive (>90%) throughout the duration of the study and the cells were differentiated down osteogenic lineage with varying degrees by controlling the rate and mode of gel degradation.
Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Entities:  

Keywords:  Hydrogels; Mesenchymal stem cells; Photopolymerization; Thiol-ene; Visible light

Mesh:

Substances:

Year:  2013        PMID: 24021231      PMCID: PMC3840055          DOI: 10.1016/j.actbio.2013.08.044

Source DB:  PubMed          Journal:  Acta Biomater        ISSN: 1742-7061            Impact factor:   8.947


  50 in total

1.  Photopolymerization of poly(ethylene glycol) diacrylate on eosin-functionalized surfaces.

Authors:  Seda Kizilel; Víctor H Pérez-Luna; Fouad Teymour
Journal:  Langmuir       Date:  2004-09-28       Impact factor: 3.882

2.  Network formation and degradation behavior of hydrogels formed by Michael-type addition reactions.

Authors:  Andrew Metters; Jeffrey Hubbell
Journal:  Biomacromolecules       Date:  2005 Jan-Feb       Impact factor: 6.988

3.  Release of protein from highly cross-linked hydrogels of poly(ethylene glycol) diacrylate fabricated by UV polymerization.

Authors:  M B Mellott; K Searcy; M V Pishko
Journal:  Biomaterials       Date:  2001-05       Impact factor: 12.479

4.  Visible light photoinitiation of mesenchymal stem cell-laden bioresponsive hydrogels.

Authors:  C S Bahney; T J Lujan; C W Hsu; M Bottlang; J L West; B Johnstone
Journal:  Eur Cell Mater       Date:  2011-07-15       Impact factor: 3.942

5.  Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ECM analogs for tissue engineering.

Authors:  B K Mann; A S Gobin; A T Tsai; R H Schmedlen; J L West
Journal:  Biomaterials       Date:  2001-11       Impact factor: 12.479

6.  Incorporation of adhesion peptides into nonadhesive hydrogels useful for tissue resurfacing.

Authors:  D L Hern; J A Hubbell
Journal:  J Biomed Mater Res       Date:  1998-02

7.  Examination of the effects of poly(N-vinylpyrrolidinone) hydrogels in direct and indirect contact with cells.

Authors:  Louise Elizabeth Smith; Stephen Rimmer; Sheila MacNeil
Journal:  Biomaterials       Date:  2006-01-19       Impact factor: 12.479

8.  The performance of human mesenchymal stem cells encapsulated in cell-degradable polymer-peptide hydrogels.

Authors:  Sarah B Anderson; Chien-Chi Lin; Donna V Kuntzler; Kristi S Anseth
Journal:  Biomaterials       Date:  2011-02-21       Impact factor: 12.479

9.  Development and Characterization of Degradable Thiol-Allyl Ether Photopolymers.

Authors:  Amber E Rydholm; Sirish K Reddy; Kristi S Anseth; Christopher N Bowman
Journal:  Polymer (Guildf)       Date:  2007-07-13       Impact factor: 4.430

Review 10.  PEG hydrogels for the controlled release of biomolecules in regenerative medicine.

Authors:  Chien-Chi Lin; Kristi S Anseth
Journal:  Pharm Res       Date:  2008-12-18       Impact factor: 4.200

View more
  17 in total

1.  Immunoisolating poly(ethylene glycol) based capsules support ovarian tissue survival to restore endocrine function.

Authors:  James R Day; Anu David; Alexa L Cichon; Tanay Kulkarni; Marilia Cascalho; Ariella Shikanov
Journal:  J Biomed Mater Res A       Date:  2018-02-05       Impact factor: 4.396

2.  Biomaterials for 4D stem cell culture.

Authors:  Amber M Hilderbrand; Elisa M Ovadia; Matthew S Rehmann; Prathamesh M Kharkar; Chen Guo; April M Kloxin
Journal:  Curr Opin Solid State Mater Sci       Date:  2016-03-28       Impact factor: 11.354

3.  In vitro and in vivo analysis of visible light crosslinkable gelatin methacryloyl (GelMA) hydrogels.

Authors:  Iman Noshadi; Seonki Hong; Kelly E Sullivan; Ehsan Shirzaei Sani; Roberto Portillo-Lara; Ali Tamayol; Su Ryon Shin; Albert E Gao; Whitney L Stoppel; Lauren D Black; Ali Khademhosseini; Nasim Annabi
Journal:  Biomater Sci       Date:  2017-09-26       Impact factor: 6.843

4.  Optimizing Photo-Encapsulation Viability of Heart Valve Cell Types in 3D Printable Composite Hydrogels.

Authors:  Laura Hockaday Kang; Patrick A Armstrong; Lauren Julia Lee; Bin Duan; Kevin Heeyong Kang; Jonathan Talbot Butcher
Journal:  Ann Biomed Eng       Date:  2016-04-22       Impact factor: 3.934

5.  Thiol-ene click hydrogels for therapeutic delivery.

Authors:  Prathamesh M Kharkar; Matthew S Rehmann; Kelsi M Skeens; Emanual Maverakis; April M Kloxin
Journal:  ACS Biomater Sci Eng       Date:  2016-01-11

6.  Recent advances in crosslinking chemistry of biomimetic poly(ethylene glycol) hydrogels.

Authors:  Chien-Chi Lin
Journal:  RSC Adv       Date:  2015-01-01       Impact factor: 3.361

7.  The relationship between thiol-acrylate photopolymerization kinetics and hydrogel mechanics: An improved model incorporating photobleaching and thiol-Michael addition.

Authors:  Hongyuan Zhu; Xiaoxiao Yang; Guy M Genin; Tian Jian Lu; Feng Xu; Min Lin
Journal:  J Mech Behav Biomed Mater       Date:  2018-08-24

8.  Modular and Adaptable Tumor Niche Prepared from Visible Light Initiated Thiol-Norbornene Photopolymerization.

Authors:  Han Shih; Tanja Greene; Murray Korc; Chien-Chi Lin
Journal:  Biomacromolecules       Date:  2016-11-11       Impact factor: 6.988

9.  Designing Visible Light-Cured Thiol-Acrylate Hydrogels for Studying the HIPPO Pathway Activation in Hepatocellular Carcinoma Cells.

Authors:  Tsai-Yu Lin; John C Bragg; Chien-Chi Lin
Journal:  Macromol Biosci       Date:  2015-12-28       Impact factor: 4.979

10.  The impact of functional groups of poly(ethylene glycol) macromers on the physical properties of photo-polymerized hydrogels and the local inflammatory response in the host.

Authors:  James R Day; Anu David; Jiwon Kim; Evan A Farkash; Marilia Cascalho; Nikola Milašinović; Ariella Shikanov
Journal:  Acta Biomater       Date:  2017-12-12       Impact factor: 8.947

View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.