Literature DB >> 23965356

Stent healing response following delivery of paclitaxel via durable polymeric matrix versus iopromide-based balloon coating in the familial hypercholesterolaemic swine model of coronary injury.

Piotr P Buszman1, Armando Tellez, Maxwell Afari, Yanping Cheng, Gerard B Conditt, Jennifer C McGregor, Krzysztof Milewski, Mark Stenoien, Greg L Kaluza, Juan F Granada.   

Abstract

AIMS: The routine use of paclitaxel-coated balloons (PCB) in combination with bare metal stents (BMS) in de novo coronary lesions has been questioned. In this study, we aimed to compare the vascular response of BMS implanted using a second-generation PCB (BMS+PCB) with the TAXUS stent (PES) and a BMS control (BMS) in the familial hypercholesterolaemic swine (FHS) model of coronary injury. METHODS AND
RESULTS: A total of 17 stents (PES=6, BMS+PCB=6, and BMS=5) were implanted in the coronary territory of 10 FHS using a 20% overstretch injury ratio. Imaging evaluation (QCA and IVUS) was conducted in all animals at baseline and 28 days following stent implantation. Following terminal imaging all animals were euthanised and stented coronary segments harvested for histological evaluation. At 28 days, the lowest degree of percentage diameter stenosis by QCA was achieved by the PES (2.9 ± 9%) followed by the BMS+PCB (9.5 ± 16.4%) and the BMS group (25.65 ± 18.7%, p<0.05). In histology, percentage area of stenosis (BMS+PCB=29.6 ± 6.4% vs. PES=21.5 ± 3.3% vs. BMS=55.2 ± 12.9%; p<0.01) and neointimal thickness (BMS+PCB=0.26 ± 0.1 mm vs. PES=0.21 ± 0.1 mm vs. BMS=0.59 ± 0.2 mm; p<0.01) were significantly reduced in both paclitaxel groups in comparison to BMS controls. Both BMS+PCB and BMS groups had higher endothelialisation scores (PES=1.50 ± 0.9 vs. BMS+PCB=2.73 ± 0.4 vs. BMS=3.00; p<0.05) and lower peri-strut inflammatory scores (PES=0.83 ± 0.4 vs. BMS+PCB=0.20 ± 0.2 vs. BMS=0.43 ± 0.6, p<0.05) when compared to PES. Neointima maturity (PCB+BMS: 2.00 [2-2.4] vs. PES: 1.00 [0.3-1] vs. BMS: 3.00, p<0.05) and fibrin deposition (PCB+BMS: 1.40 ± 0.3 vs. PES: 2.17 ± 0.7 vs. BMS: 0.27 ± 0.3, p<0.05) scores in PCB+BMS appeared to fall between the PES and the BMS ranges.
CONCLUSIONS: In the FHS coronary injury model, BMS implantation using a PCB yields a degree of neointimal inhibition comparable to the PES. The BMS+PCB combination presented lower degrees of inflammation and fibrin deposition; however, signs of delayed healing were still present.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23965356     DOI: 10.4244/EIJV9I4A82

Source DB:  PubMed          Journal:  EuroIntervention        ISSN: 1774-024X            Impact factor:   6.534


  3 in total

1.  Coating and Pharmacokinetic Evaluation of Air Spray Coated Drug Coated Balloons.

Authors:  Emily A Turner; Marzieh K Atigh; Megan M Erwin; Uwe Christians; Saami K Yazdani
Journal:  Cardiovasc Eng Technol       Date:  2018-03-01       Impact factor: 2.495

2.  In vitro and in vivo Assessment of Keratose as a Novel Excipient of Paclitaxel Coated Balloons.

Authors:  Emily Turner; Megan Erwin; Marzieh Atigh; Uwe Christians; Justin M Saul; Saami K Yazdani
Journal:  Front Pharmacol       Date:  2018-07-30       Impact factor: 5.810

3.  Pre-Clinical Investigation of Keratose as an Excipient of Drug Coated Balloons.

Authors:  Emily Goel; Megan Erwin; Claire V Cawthon; Carson Schaff; Nathaniel Fedor; Trevor Rayl; Onree Wilson; Uwe Christians; Thomas C Register; Randolph L Geary; Justin Saul; Saami K Yazdani
Journal:  Molecules       Date:  2020-03-31       Impact factor: 4.411

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.