Literature DB >> 23945078

Microstructured shape memory polymer surfaces with reversible dry adhesion.

Jeffrey D Eisenhaure1, Tao Xie, Stephen Varghese, Seok Kim.   

Abstract

We present a shape memory polymer (SMP) surface with repeatable, very strong (>18 atm), and extremely reversible (strong to weak adhesion ratio of >1 × 10(4)) dry adhesion to a glass substrate. This was achieved by exploiting bulk material properties of SMP and surface microstructuring. Its exceptional dry adhesive performance is attributed to the SMP's rigidity change in response to temperature and its capabilities of temporary shape locking and permanent shape recovery, which when combined with a microtip surface design enables time-independent control of contact area.

Entities:  

Mesh：

Substances：

Year:  2013        PMID： 23945078     DOI： 10.1021/am402479f

Source DB:  PubMed          Journal:  ACS Appl Mater Interfaces        ISSN： 1944-8244            Impact factor:   9.229


  12 in total

1.  Intrinsically reversible superglues via shape adaptation inspired by snail epiphragm.

Authors:  Hyesung Cho; Gaoxiang Wu; Jason Christopher Jolly; Nicole Fortoul; Zhenping He; Yuchong Gao; Anand Jagota; Shu Yang
Journal:  Proc Natl Acad Sci U S A       Date:  2019-06-17       Impact factor: 11.205

2.  Harnessing reversible dry adhesion using shape memory polymer microparticles.

Authors:  Wenbing Li; Junhao Liu; Wanting Wei; Kun Qian
Journal:  RSC Adv       Date:  2021-06-01       Impact factor: 4.036

3.  Temperature-Induced Switchable Adhesion using Nickel-Titanium-Polydimethylsiloxane Hybrid Surfaces.

Authors:  Mareike Frensemeier; Jessica S Kaiser; Carl P Frick; Andreas S Schneider; Eduard Arzt; Ray S Fertig; Elmar Kroner
Journal:  Adv Funct Mater       Date:  2015-04-08       Impact factor: 18.808

4.  Thermal Release Transfer Printing for Stretchable Conformal Bioelectronics.

Authors:  Zhuocheng Yan; Taisong Pan; Miaomiao Xue; Changyong Chen; Yan Cui; Guang Yao; Long Huang; Feiyi Liao; Wei Jing; Hulin Zhang; Min Gao; Daqing Guo; Yang Xia; Yuan Lin
Journal:  Adv Sci (Weinh)       Date:  2017-07-31       Impact factor: 16.806

5.  Sticking to rough surfaces using functionally graded bio-inspired microfibres.

Authors:  Serdar Gorumlu; Burak Aksak
Journal:  R Soc Open Sci       Date:  2017-06-07       Impact factor: 2.963

6.  Soft nanocomposite electroadhesives for digital micro- and nanotransfer printing.

Authors:  Sanha Kim; Yijie Jiang; Kiera L Thompson Towell; Michael S H Boutilier; Nigamaa Nayakanti; Changhong Cao; Chunxu Chen; Christine Jacob; Hangbo Zhao; Kevin T Turner; A John Hart
Journal:  Sci Adv       Date:  2019-10-11       Impact factor: 14.136

7.  Modulation of Interfacial Adhesion Using Semicrystalline Shape-Memory Polymers.

Authors:  Soyoun Kim; Sanjay Lakshmanan; Jinhai Li; Mitchell Anthamatten; John Lambropoulos; Alexander A Shestopalov
Journal:  Langmuir       Date:  2022-03-09       Impact factor: 3.882

8.  Contact Printing of Multilayered Thin Films with Shape Memory Polymers.

Authors:  Soyoun Kim; Nan Liu; Alexander A Shestopalov
Journal:  ACS Nano       Date:  2022-03-30       Impact factor: 18.027

9.  High Fidelity Tape Transfer Printing Based On Chemically Induced Adhesive Strength Modulation.

Authors:  Kyoseung Sim; Song Chen; Yuhang Li; Mejdi Kammoun; Yun Peng; Minwei Xu; Yang Gao; Jizhou Song; Yingchun Zhang; Haleh Ardebili; Cunjiang Yu
Journal:  Sci Rep       Date:  2015-11-10       Impact factor: 4.379

10.  Rapid and continuous regulating adhesion strength by mechanical micro-vibration.

Authors:  Langquan Shui; Laibing Jia; Hangbo Li; Jiaojiao Guo; Ziyu Guo; Yilun Liu; Ze Liu; Xi Chen
Journal:  Nat Commun       Date:  2020-03-27       Impact factor: 14.919
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.