Literature DB >> 23910302

Microstructure and characteristic properties of gelatin/chitosan scaffold prepared by a combined freeze-drying/leaching method.

M Alizadeh1, F Abbasi, A B Khoshfetrat, H Ghaleh.   

Abstract

A combined freeze-drying and particulate leaching method for scaffold synthesis showed an improvement in the horizontal microstructure of the gelatin/chitosan scaffolds. Type and concentration of the cross-linking agent, freezing temperature, concentration of the polymeric solution and gelatin/chitosan weight ratio were the variables affecting the scaffold properties. Assessment of the tensile properties of the scaffolds revealed that for a scaffold with 50% chitosan, glutaraldehyde, as a cross-linking agent, created much tighter polymeric network compared to N,N-(3-dimethylaminopropyl)-N'-ethyl carbodiimide (EDC). However, in the case of gelatin scaffolds, EDC was identified as the stronger cross-linker. Compressive behavior of the scaffolds satisfied formulations obtained from the theoretical modeling of the low-density, elastomeric foams. The investigation of the scaffold degradation indicated that the increase in the mechanical strength of the scaffolds would not always reduce their degradation rate.
Copyright © 2013 Elsevier B.V. All rights reserved.

Entities:  

Keywords:  Chitosan; Cross-linking; Degradation; Gelatin; Porosity; Scaffold

Mesh:

Substances:

Year:  2013        PMID: 23910302     DOI: 10.1016/j.msec.2013.05.039

Source DB:  PubMed          Journal:  Mater Sci Eng C Mater Biol Appl        ISSN: 0928-4931            Impact factor:   7.328


  10 in total

1.  Enhanced biomineralization and protein adsorption capacity of 3D chitosan/hydroxyapatite biomimetic scaffolds applied for bone-tissue engineering.

Authors:  Nguyen Kim Nga; Lai Thi Thanh Tam; Nguyen Thu Ha; Pham Hung Viet; Tran Quang Huy
Journal:  RSC Adv       Date:  2020-11-26       Impact factor: 4.036

2.  Supercritical CO2 foaming of thermoplastic materials derived from maize: proof-of-concept use in mammalian cell culture applications.

Authors:  Grissel Trujillo-de Santiago; Cynthia Guadalupe Portales-Cabrera; Roberto Portillo-Lara; Diana Araiz-Hernández; Maria Cristina Del Barone; Erika García-López; Cecilia Rojas-de Gante; María de Los Angeles De Santiago-Miramontes; Juan Carlos Segoviano-Ramírez; Silverio García-Lara; Ciro Ángel Rodríguez-González; Mario Moisés Alvarez; Ernesto Di Maio; Salvatore Iannace
Journal:  PLoS One       Date:  2015-04-10       Impact factor: 3.240

Review 3.  Recent advances in bioprinting techniques: approaches, applications and future prospects.

Authors:  Jipeng Li; Mingjiao Chen; Xianqun Fan; Huifang Zhou
Journal:  J Transl Med       Date:  2016-09-20       Impact factor: 5.531

4.  Comparative Study of Gelatin Hydrogels Modified by Various Cross-Linking Agents.

Authors:  Joanna Skopinska-Wisniewska; Marta Tuszynska; Ewa Olewnik-Kruszkowska
Journal:  Materials (Basel)       Date:  2021-01-14       Impact factor: 3.623

Review 5.  Advances in spray products for skin regeneration.

Authors:  Paula Pleguezuelos-Beltrán; Patricia Gálvez-Martín; Daniel Nieto-García; Juan Antonio Marchal; Elena López-Ruiz
Journal:  Bioact Mater       Date:  2022-03-08

6.  Improving Biocompatibility of Polyester Fabrics through Polyurethane/Gelatin Complex Coating for Potential Vascular Application.

Authors:  Wei Wang; Ziyi Zhou; Na Liu; Xiaopei Zhang; Hua Zhou; Yuanfei Wang; Kuanjun Fang; Tong Wu
Journal:  Polymers (Basel)       Date:  2022-02-28       Impact factor: 4.329

Review 7.  Chitosan composite scaffolds for articular cartilage defect repair: a review.

Authors:  Huijun Li; Cheng Hu; Huijun Yu; Chuanzhong Chen
Journal:  RSC Adv       Date:  2018-01-19       Impact factor: 4.036

8.  Hybrid Methacrylated Gelatin and Hyaluronic Acid Hydrogel Scaffolds. Preparation and Systematic Characterization for Prospective Tissue Engineering Applications.

Authors:  B Velasco-Rodriguez; T Diaz-Vidal; L C Rosales-Rivera; C A García-González; C Alvarez-Lorenzo; A Al-Modlej; V Domínguez-Arca; G Prieto; S Barbosa; J F A Soltero Martínez; P Taboada
Journal:  Int J Mol Sci       Date:  2021-06-23       Impact factor: 5.923

9.  3D printed intelligent scaffold prevents recurrence and distal metastasis of breast cancer.

Authors:  Xuelei Shi; Yanxiang Cheng; Jian Wang; Haoxiang Chen; Xiaocheng Wang; Xinghuan Li; Weihong Tan; Zhikai Tan
Journal:  Theranostics       Date:  2020-08-29       Impact factor: 11.556

10.  Degradation-Dependent Stress Relaxing Semi-Interpenetrating Networks of Hydroxyethyl Cellulose in Gelatin-PEG Hydrogel with Good Mechanical Stability and Reversibility.

Authors:  Kamol Dey; Silvia Agnelli; Elisa Borsani; Luciana Sartore
Journal:  Gels       Date:  2021-12-20
  10 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.