Pengfei Xin1, Bin Jiang2, Jiewen Dai1, Guanghong Hu2, Xudong Wang1, Bing Xu1, Steve G F Shen3. 1. Department of Oral & Cranio-Maxillofacial Surgery, Ninth People's Hospital, College of Stomatology, Shanghai Jiao Tong University School of Medicine, Shanghai Key Laboratory of Stomatology, Shanghai 200011, People's Republic of China. 2. Department of Plasticity Engineering, Shanghai Jiao Tong University, Shanghai 200030, People's Republic of China. 3. Department of Oral & Cranio-Maxillofacial Surgery, Ninth People's Hospital, College of Stomatology, Shanghai Jiao Tong University School of Medicine, Shanghai Key Laboratory of Stomatology, Shanghai 200011, People's Republic of China. Electronic address: maxillofacsurg@163.com.
Abstract
OBJECTIVE: The aim of this study was to explore the cause of type B condylar head fracture after parasymphyseal impact, and evaluate the biomechanics of osteosynthesis using two positional screws for the repair of this type of fractures. METHODS: A finite element model of the mandible was created, and a parasymphyseal impact was simulated using Mimics 10.01 and Abaqus 6.10 software. The type B condylar head fracture was simulated in the right condyle using a mimics simulation cut with polyplane module according to the analyzed results together with clinical experience, and the left condyle was used as a control. Two positional screws were used for rigid internal fixation of the fracture. von Mises stress distributions in the condyles and screws were analyzed. RESULTS: The von Mises stress generated in parasymphyseal trauma simulation showed a significant concentration in the sagittal direction of the condyle. In two-positional-screw osteosynthesis of the condylar head fractures, stress concentration appeared within the screws in the gap area between the two fractured segments and the area around the screw head. A small amount of stress was distributed in the screw holes and on the posterior surfaces of both segments. The von Mises stress was negligible in the fractured sagittal surfaces. CONCLUSION: It is reasonable to attribute the cause of type B condylar head fracture to the anatomical features of the condyle. The biomechanics of two-positional-screw osteosynthesis revealed that the stress can transmit through the screws to the medial fragments, and the stresses on both sagittal fractured surfaces are minimal.
OBJECTIVE: The aim of this study was to explore the cause of type B condylar head fracture after parasymphyseal impact, and evaluate the biomechanics of osteosynthesis using two positional screws for the repair of this type of fractures. METHODS: A finite element model of the mandible was created, and a parasymphyseal impact was simulated using Mimics 10.01 and Abaqus 6.10 software. The type B condylar head fracture was simulated in the right condyle using a mimics simulation cut with polyplane module according to the analyzed results together with clinical experience, and the left condyle was used as a control. Two positional screws were used for rigid internal fixation of the fracture. von Mises stress distributions in the condyles and screws were analyzed. RESULTS: The von Mises stress generated in parasymphyseal trauma simulation showed a significant concentration in the sagittal direction of the condyle. In two-positional-screw osteosynthesis of the condylar head fractures, stress concentration appeared within the screws in the gap area between the two fractured segments and the area around the screw head. A small amount of stress was distributed in the screw holes and on the posterior surfaces of both segments. The von Mises stress was negligible in the fractured sagittal surfaces. CONCLUSION: It is reasonable to attribute the cause of type B condylar head fracture to the anatomical features of the condyle. The biomechanics of two-positional-screw osteosynthesis revealed that the stress can transmit through the screws to the medial fragments, and the stresses on both sagittal fractured surfaces are minimal.