PURPOSE: This study aimed to quantify the costs of complete denture fabrication by a simplified method compared with a conventional protocol. MATERIALS AND METHODS: A sample of edentulous patients needing conventional maxillary and mandibular complete dentures was randomly divided into group S, which received dentures fabricated by a simplified method, and group C, which received conventionally fabricated dentures. We calculated direct and indirect costs for each participant including unscheduled procedures. This study assessed 19 and 20 participants allocated into groups S and C, respectively, and comparisons between groups were conducted by the Mann-Whitney and Student's t-test (α = 0.05). RESULTS: Complete denture fabrication demanded median time periods of 173.2 and 284.5 minutes from the operator for groups S and C respectively, and 46.6 and 61.7 minutes from the dental assistant (significant differences, p < 0.05). There was no difference between groups regarding postinsertion adjustments. Group S showed lower values for costs with materials and time spent by patients than group C during the fabrication stage, but not during adjustments. CONCLUSIONS: The median direct cost of complete denture treatment was 34.9% lower for the simplified method. It can be concluded that the simplified method is less costly for patients and the health system when compared with a conventional protocol for the rehabilitation of edentulous patients.
RCT Entities:
PURPOSE: This study aimed to quantify the costs of complete denture fabrication by a simplified method compared with a conventional protocol. MATERIALS AND METHODS: A sample of edentulouspatients needing conventional maxillary and mandibular complete dentures was randomly divided into group S, which received dentures fabricated by a simplified method, and group C, which received conventionally fabricated dentures. We calculated direct and indirect costs for each participant including unscheduled procedures. This study assessed 19 and 20 participants allocated into groups S and C, respectively, and comparisons between groups were conducted by the Mann-Whitney and Student's t-test (α = 0.05). RESULTS: Complete denture fabrication demanded median time periods of 173.2 and 284.5 minutes from the operator for groups S and C respectively, and 46.6 and 61.7 minutes from the dental assistant (significant differences, p < 0.05). There was no difference between groups regarding postinsertion adjustments. Group S showed lower values for costs with materials and time spent by patients than group C during the fabrication stage, but not during adjustments. CONCLUSIONS: The median direct cost of complete denture treatment was 34.9% lower for the simplified method. It can be concluded that the simplified method is less costly for patients and the health system when compared with a conventional protocol for the rehabilitation of edentulouspatients.
Authors: Marco Antônio Lavorato de Almeida; André Ulisses Dantas Batista; Maria Rejane Cruz de Araújo; Vanessa Fabiana Dei Santi de Almeida; Paulo Rogério Ferreti Bonan; Danielle Nóbrega Alves; Tereza Karla Vieira Lopes da Costa; Diego Figueiredo Nóbrega; Ricardo Dias de Castro Journal: BMC Oral Health Date: 2020-08-17 Impact factor: 2.757