Various irrigation protocols for final rinse to improve bond strengths of fiber posts inside the root canal.

Irrigation after post space preparation and its effects on the bond strength of different adhesive strategies are still an issue of interest. The aim of the present study was to investigate the effects of various irrigation protocols (IPs) on the push-out bond strengths of fiber posts. One-hundred and fifty extracted human anterior teeth were divided into three groups (n = 50 each) and endodontically treated. The post space was irrigated before post placement using the following five IPs in each group: IP1 (control): 5 ml of distilled water; IP2: 5.25% sodium hypochlorite (NaOCl) applied with passive ultrasonic irrigation (PUI); IP3: 1% NaOCl applied with PUI; IP4: 18% ethylenediaminetetracetic acid (EDTA) followed by 5.25% NaOCl; and IP5: 2% chlorhexidine (CHX). Fiber posts placement in each group was performed using three different adhesive strategies. A self-etch adhesive system revealed higher bond strength (16.2 ± 6.9 MPa) compared with an etch-and-rinse adhesive (8.5 ± 4.2 MPa) and a self-adhesive resin cement (9.2 ± 4.7 MPa). The use of 18% EDTA/5.25% NaOCl increased the bond strength of the self-adhesive resin cement. Conversely, this IP decreased the bond strength for the etch-and-rinse adhesive system, whilst 1% NaOCl enhanced the bond strength for the same system. Consequently, each adhesive strategy may need to be adapted to a specific IP.