Literature DB >> 23834700

Interfacial tension and wettability in water-carbon dioxide systems: experiments and self-consistent field modeling.

Soumi Banerjee1, Eveline Hassenklöver, J Mieke Kleijn, Martien A Cohen Stuart, Frans A M Leermakers.   

Abstract

This paper presents experimental and modeling results on water-CO2 interfacial tension (IFT) together with wettability studies of water on both hydrophilic and hydrophobic surfaces immersed in CO2. CO2-water interfacial tension (IFT) measurements showed that the IFT decreased with increasing pressure and the negative slopes of IFT-pressure isotherms decreased with increasing temperature. Water contact angle on a cellulose surface (hydrophilic) immersed in CO2 increased with pressure, whereas the water contact angle on a hydrophobic surface such as hexamethyl disilazane (HMDS) coated silicon surface was almost independent of pressure. These experimental findings were augmented by modeling using the self-consistent field theory. The theory applies the lattice discretization scheme of Scheutjens and Fleer, with a discretization length close to the size of the molecules. In line with this we have implemented a primitive molecular model, with just small variations in the molar volume. The theory makes use of the Bragg-Williams approximation and has binary Flory-Huggins interaction parameters (FH) between CO2, water, and free volume. Using this model, we generated the complete IFT-pressure isotherms at various temperatures, which coincided well with the trends reported in literature, that is, the water-CO2 interfacial tension decreased with increasing pressure for pressures ≤100 bar and became independent of pressure >100 bar. The transition point occurred at higher pressures with increasing temperature. At three-phase coexistence (water-CO2-free volume) and at the water-vapor interface (water-free volume), we always found the CO2 phase in between the water-rich and free volume-rich phases. This means that for the conditions studied, the water-vapor interface is always wet by CO2 and there are no signs of a nearby wetting transition. Calculation of the water contact angle on a solid surface was based on the computed adsorption isotherms of water from a vapor or from a pressurized CO2-rich phase and analysis of surface pressures at water-vapor or water-CO2 coexistence. The results matched reasonably well with the experimental contact angle data. Besides, we also computed the volume fraction profiles of the CO2, H2O, and the V phase, from which the preferential adsorption of CO2 near the hydrophilic surface was deduced.

Entities:  

Year:  2013        PMID: 23834700     DOI: 10.1021/jp400940s

Source DB:  PubMed          Journal:  J Phys Chem B        ISSN: 1520-5207            Impact factor:   2.991


  1 in total

1.  Interfacial tension and CO2 diffusion coefficients for a CO2 + water and n-decane system at pressures of 10 to 160 bar.

Authors:  Nikhil Bagalkot; Aly A Hamouda
Journal:  RSC Adv       Date:  2018-11-14       Impact factor: 3.361

  1 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.