Literature DB >> 23777666

Use of recycled plastics in wood plastic composites - a review.

Saeed Kazemi Najafi1.   

Abstract

The use of recycled and waste thermoplastics has been recently considered for producing wood plastic composites (WPCs). They have great potential for WPCs manufacturing according to results of some limited researches. This paper presents a detailed review about some essential properties of waste and recycled plastics, important for WPCs production, and of research published on the effect of recycled plastics on the physical and mechanical properties of WPCs.
Copyright © 2013 Elsevier Ltd. All rights reserved.

Keywords:  Degradation; Physical and mechanical properties; Waste and recycled plastics; Wood plastic composites

Mesh：

Substances：

Year:  2013        PMID： 23777666     DOI： 10.1016/j.wasman.2013.05.017

Source DB:  PubMed          Journal:  Waste Manag        ISSN： 0956-053X            Impact factor:   7.145


  5 in total

Review 1.  Solutions and Integrated Strategies for the Control and Mitigation of Plastic and Microplastic Pollution.

Authors:  Joana C Prata; Ana L Patrício Silva; João P da Costa; Catherine Mouneyrac; Tony R Walker; Armando C Duarte; Teresa Rocha-Santos
Journal:  Int J Environ Res Public Health       Date:  2019-07-07       Impact factor: 3.390

2.  Characteristics of the Waste Wood Biomass and Its Effect on the Properties of Wood Sanding Dust/Recycled PP Composite.

Authors:  Sanita Vitolina; Galia Shulga; Brigita Neiberte; Jevgenijs Jaunslavietis; Anrijs Verovkins; Talrits Betkers
Journal:  Polymers (Basel)       Date:  2022-01-24       Impact factor: 4.329

Review 3.  Enriching WPCs and NFPCs with Carbon Nanotubes and Graphene.

Authors:  Damian Łukawski; Patrycja Hochmańska-Kaniewska; Dominika Janiszewska; Grzegorz Wróblewski; Jeff Patmore; Agnieszka Lekawa-Raus
Journal:  Polymers (Basel)       Date:  2022-02-15       Impact factor: 4.329

Review 4.  A comprehensive review of the polyolefin composites and their properties.

Authors:  Abdallah S Elgharbawy; Rehab M Ali
Journal:  Heliyon       Date:  2022-07-11

5.  Tensile Behavior of 3D Printed Polylactic Acid (PLA) Based Composites Reinforced with Natural Fiber.

Authors:  Eliana M Agaliotis; Baltazar D Ake-Concha; Alejandro May-Pat; Juan P Morales-Arias; Celina Bernal; Alex Valadez-Gonzalez; Pedro J Herrera-Franco; Gwénaëlle Proust; J Francisco Koh-Dzul; Jose G Carrillo; Emmanuel A Flores-Johnson
Journal:  Polymers (Basel)       Date:  2022-09-23       Impact factor: 4.967
  5 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.