Impact of polymer flocculants on coagulation-microfiltration of surface water.

Organic polymers are widely used as flocculants in pretreatment for microfiltration. However, their impact on microfiltration system performance was not well understood. In this study, the effects of three types of polymer flocculants on microfiltration permeate water quality and membrane fouling were evaluated using a hollow fiber membrane under two different operation modes, coagulation/flocculation-sedimentation-microfiltration (CFSM) and coagulation/flocculation-microfiltration (CFM). Interestingly, the effect of polymers on membrane fouling did not appear to reflect their impact on dissolved organic matter content or floc particle properties in the membrane feed water. The addition of polymer flocculants resulted in floc particles of larger size and smaller fractal dimension and slightly enhanced the removal of dissolved organic matter, both of which were expected to reduce membrane fouling. However, it significantly aggravated membrane fouling in all cases except when the positively charged poly(diallyldimethylammonium) chloride was used in the CFSM process. In particular, all polymers greatly increased hydraulically irreversible fouling in the CFM mode. The increased fouling in the CFSM mode is attributed to the residual polymer, while that in the CFM mode is attributed to the enhanced irreversible floc particle attachment on the membrane surface. Considering the potential severe membrane fouling and the small improvement in treated water quality when polymers are used, the application of polymers in microfiltration pretreatment needs to be carefully evaluated.