B(1) mapping with a pure phase encode approach: quantitative density profiling.

In MRI, it is frequently observed that naturally uniform samples do not have uniform image intensities. In many cases this non-uniform image intensity is due to an inhomogeneous B1 field. The 'principle of reciprocity' states that the received signal is proportional to the local magnitude of the applied B1 field per unit current. Inhomogeneity in the B1 field results in signal intensity variations that limit the ability of MRI to yield quantitative information. In this paper a novel method is described for mapping B1 inhomogeneities based on measurement of the B1 field employing centric-scan pure phase encode MRI measurements. The resultant B1 map may be employed to correct related non-uniformities in MR images. The new method is based on acquiring successive images with systematically incremented low flip angle excitation pulses. The local image intensity variation is proportional to B1(2), which ensures high sensitivity to B1 field variations. Pure phase encoding ensures the resultant B1 field maps are free from distortions caused by susceptibility variation, chemical shift and paramagnetic impurities. Hence, the method works well in regions of space that are not accessible to other methods such as in the vicinity of conductive metallic structures, such as the RF probe itself. Quantitative density images result when the centric scan pure phase encode measurement is corrected with a relative or absolute B1 field map. The new technique is simple, reliable and robust.