PURPOSE: Hydrogel composites of oligo(poly(ethylene glycol) fumarate) (OPF) and gelatin microparticles (GMs) were investigated as carriers of bone morphogenetic protein-2 (BMP-2) for bone tissue engineering applications. METHODS: Hydrogel composites with different physical characteristics were prepared by changing the amount and type (acidic vs. basic) of gelatin incorporated in the OPF bulk phase. Composites with differing physical properties (degradation, swelling, and mechanical properties) and differing BMP-2 loading phase were investigated to determine the effect of these factors on BMP-2 release profiles over 28 days. RESULTS: Overall, higher gelatin amount increased the degradation and swelling of composites, and acidic GMs further increased the degradation and swelling and reduced the compressive modulus of the composites. The most significant factor affecting the release of BMP-2 from composites was the loading phase of the growth factor: GM loading reduced the burst release, increased BMP-2 release during the later phases of the experiment, and increased the cumulative release in faster degrading samples. CONCLUSIONS: The results indicate that the physical properties and the BMP-2 release kinetics of hydrogel composites can be controlled by adjusting multiple parameters at the time of the hydrogel composite fabrication.
PURPOSE: Hydrogel composites of oligo(poly(ethylene glycol) fumarate) (OPF) and gelatin microparticles (GMs) were investigated as carriers of bone morphogenetic protein-2 (BMP-2) for bone tissue engineering applications. METHODS: Hydrogel composites with different physical characteristics were prepared by changing the amount and type (acidic vs. basic) of gelatin incorporated in the OPF bulk phase. Composites with differing physical properties (degradation, swelling, and mechanical properties) and differing BMP-2 loading phase were investigated to determine the effect of these factors on BMP-2 release profiles over 28 days. RESULTS: Overall, higher gelatin amount increased the degradation and swelling of composites, and acidic GMs further increased the degradation and swelling and reduced the compressive modulus of the composites. The most significant factor affecting the release of BMP-2 from composites was the loading phase of the growth factor: GM loading reduced the burst release, increased BMP-2 release during the later phases of the experiment, and increased the cumulative release in faster degrading samples. CONCLUSIONS: The results indicate that the physical properties and the BMP-2 release kinetics of hydrogel composites can be controlled by adjusting multiple parameters at the time of the hydrogel composite fabrication.
Authors: Nasim Annabi; Jason W Nichol; Xia Zhong; Chengdong Ji; Sandeep Koshy; Ali Khademhosseini; Fariba Dehghani Journal: Tissue Eng Part B Rev Date: 2010-08 Impact factor: 6.389
Authors: Johnna S Temenoff; Hansoo Park; Esmaiel Jabbari; Tiffany L Sheffield; Richard G LeBaron; Catherine G Ambrose; Antonios G Mikos Journal: J Biomed Mater Res A Date: 2004-08-01 Impact factor: 4.396
Authors: Johnna S Temenoff; Hansoo Park; Esmaiel Jabbari; Daniel E Conway; Tiffany L Sheffield; Catherine G Ambrose; Antonios G Mikos Journal: Biomacromolecules Date: 2004 Jan-Feb Impact factor: 6.988
Authors: Clark J Needham; Sarita R Shah; Rebecca L Dahlin; Lucas A Kinard; Johnny Lam; Brendan M Watson; Steven Lu; F Kurtis Kasper; Antonios G Mikos Journal: Acta Biomater Date: 2014-05-20 Impact factor: 8.947
Authors: Lucas A Kinard; Rebecca L Dahlin; Johnny Lam; Steven Lu; Esther J Lee; F Kurtis Kasper; Antonios G Mikos Journal: Acta Biomater Date: 2014-07-18 Impact factor: 8.947
Authors: Xifeng Liu; Matthew N George; Linli Li; Darian Gamble; A Lee Miller Ii; Bipin Gaihre; Brian E Waletzki; Lichun Lu Journal: ACS Biomater Sci Eng Date: 2020-07-09