Through nanohole formation in thin metallic film by single nanosecond laser pulses using optical dielectric apertureless probe.

Separate nanoholes with the minimum size down to 35 nm (~λ/15) and nanohole arrays with the hole size about 100 nm (~λ/5) were fabricated in a 50 nm optically "thick" Au/Pd film, using single 532 nm pump nanosecond laser pulses focused to diffraction-limited spots by a specially designed apertureless dielectric fiber probe. Nanohole fabrication in the metallic film was found to result from lateral heat diffusion and center-symmetrical lateral expulsion of the melt by its vapor recoil pressure. The optimized apertureless dielectric microprobe was demonstrated to enable laser fabrication of deep through nanoholes.