Literature DB >> 23590531

Blood and fibroblast responses to thermoset BisGMA-TEGDMA/glass fiber-reinforced composite implants in vitro.

Aous A Abdulmajeed1, X F Walboomers, Jonathan Massera, Anne K Kokkari, Pekka K Vallittu, Timo O Närhi.   

Abstract

OBJECTIVES: This in vitro study was designed to evaluate both blood and human gingival fibroblast responses on fiber-reinforced composite (FRC) aimed to be used as oral implant abutment material.
MATERIAL AND METHODS: Two different types of substrates were investigated: (a) Plain polymer (BisGMA 50%-TEGDMA 50%) and (b) FRC. The average surface roughness (Ra) was measured using spinning-disk confocal microscope. The phase composition was identified using X-ray diffraction analyzer. The degree of monomer conversion (DC%) was determined using FTIR spectrometry. The blood response, including the blood-clotting ability and platelet adhesion morphology, was evaluated. Fibroblast cell responses were studied in cell culture environment using routine test conditions.
RESULTS: The Ra of the substrates investigated was less than 0.1 μm with no signs of surface crystallization. The DC% was 89.1 ± 0.5%. The FRC substrates had a shorter clotting time and higher platelets activation state than plain polymer substrates. The FRC substrates showed higher (P < 0.01-0.001) amount of adhered cells than plain polymer substrates at all time points investigated. The strength of attachment was evaluated using serial trypsinization, the number of cells detached from FRC substrates was 59 ± 5%, whereas those detached from the plane polymer substrates was 70 ± 5%, indicating a stronger (P < 0.01) cell attachment on the FRC surfaces. Fibroblasts grew more efficiently on FRC than on plain polymer substrates, showing significantly higher (P < 0.01) cell metabolic activities throughout the experiment.
CONCLUSIONS: The presence of E-glass fibers enhances blood and fibroblast responses on composite surfaces in vitro.
© 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

Entities:  

Keywords:  blood clotting; fiber-reinforced composite; human gingival fibroblasts; implant abutment; platelets adhesion; soft tissue attachment; trypsinization

Mesh:

Substances:

Year:  2013        PMID: 23590531     DOI: 10.1111/clr.12151

Source DB:  PubMed          Journal:  Clin Oral Implants Res        ISSN: 0905-7161            Impact factor:   5.977


  4 in total

1.  In vitro blood and fibroblast responses to BisGMA-TEGDMA/bioactive glass composite implants.

Authors:  Aous A Abdulmajeed; Anne K Kokkari; Jarmo Käpylä; Jonathan Massera; Leena Hupa; Pekka K Vallittu; Timo O Närhi
Journal:  J Mater Sci Mater Med       Date:  2014-01       Impact factor: 3.896

2.  In vitro assessment of the soft tissue/implant interface using porcine gingival explants.

Authors:  Aous A Abdulmajeed; Jaana Willberg; Stina Syrjänen; Pekka K Vallittu; Timo O Närhi
Journal:  J Mater Sci Mater Med       Date:  2015-01-15       Impact factor: 3.896

3.  Blood Coagulation on Titanium Dioxide Films with Various Crystal Structures on Titanium Implant Surfaces.

Authors:  Her-Hsiung Huang; Zhi-Hwa Chen; Diem Thuy Nguyen; Chuan-Ming Tseng; Chiang-Sang Chen; Jean-Heng Chang
Journal:  Cells       Date:  2022-08-23       Impact factor: 7.666

4.  TiO2 Coating and UV Photofunctionalization Enhance Blood Coagulation on Zirconia Surfaces.

Authors:  Khalil Shahramian; Aous Abdulmajeed; Ilkka Kangasniemi; Eva Söderling; Timo Närhi
Journal:  Biomed Res Int       Date:  2019-04-01       Impact factor: 3.411

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.