Literature DB >> 23436124

Geochemical and mineralogical characterization of a neutral, low-sulfide/high-carbonate tailings impoundment, Markušovce, eastern Slovakia.

Edgar Hiller1, Marián Petrák, Roman Tóth, Bronislava Lalinská-Voleková, L'ubomír Jurkovič, Gabriela Kučerová, Anežka Radková, Peter Sottník, Jaroslav Vozár.   

Abstract

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Markušovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation-equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite > pyrite > tetrahedrite>arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16-8.12) and the waters (pH 7.00-8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu>Sb>Hg>As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52-7.96) and low concentrations of dissolved metal(loid)s (<5-7.0 μg/L Cu, <0.1-0.3 μg/L Hg, 5.0-16 μg/L As, and 5.0-43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23436124     DOI: 10.1007/s11356-013-1581-5

Source DB:  PubMed          Journal:  Environ Sci Pollut Res Int        ISSN: 0944-1344            Impact factor:   4.223


  8 in total

1.  Occurrence and Constitution of Natural and Synthetic Ferrihydrite, a Widespread Iron Oxyhydroxide.

Authors:  John L. Jambor; John E. Dutrizac
Journal:  Chem Rev       Date:  1998-11-05       Impact factor: 60.622

2.  Management of incinerator residues in Flanders (Belgium) and in neighbouring countries. A comparison.

Authors:  T Van Gerven; D Geysen; L Stoffels; M Jaspers; G Wauters; C Vandecasteele
Journal:  Waste Manag       Date:  2005       Impact factor: 7.145

3.  Sorption of Sb(III) and Sb(V) to goethite: influence on Sb(III) oxidation and mobilization.

Authors:  Ann-Kathrin Leuz; Hermann Mönch; C Annette Johnson
Journal:  Environ Sci Technol       Date:  2006-12-01       Impact factor: 9.028

4.  Sorption of arsenite and arsenate on ferrihydrite: effect of organic and inorganic ligands.

Authors:  Jun Zhu; Massimo Pigna; Vincenza Cozzolino; Antonio G Caporale; Antonio Violante
Journal:  J Hazard Mater       Date:  2011-03-02       Impact factor: 10.588

5.  Mercury mine drainage and processes that control its environmental impact.

Authors:  J J Rytuba
Journal:  Sci Total Environ       Date:  2000-10-09       Impact factor: 7.963

6.  Adsorption of arsenic(III) and arsenic(V) from groundwater using natural siderite as the adsorbent.

Authors:  Huaming Guo; Doris Stüben; Zsolt Berner
Journal:  J Colloid Interface Sci       Date:  2007-07-26       Impact factor: 8.128

7.  Environmental and socioeconomic assessment of impacts by mining activities-a case study in the Certej River catchment, Western Carpathians, Romania.

Authors:  Jürg Zobrist; Mihaela Sima; Diana Dogaru; Marin Senila; Hong Yang; Claudia Popescu; Cecilia Roman; Abraham Bela; Linda Frei; Bernhard Dold; Dan Balteanu
Journal:  Environ Sci Pollut Res Int       Date:  2009-01-22       Impact factor: 4.223

8.  Medical geochemistry research in Spissko-Gemerské rudohorie Mts., Slovakia.

Authors:  S Rapant; V Cvecková; Z Dietzová; M Khun; M Letkovicová
Journal:  Environ Geochem Health       Date:  2008-02-06       Impact factor: 4.609

  8 in total
  3 in total

1.  Elemental mobility in sulfidic mine tailings reclaimed with paper mill by-products as sealing materials.

Authors:  Yu Jia; Nanna Stahre; Maria Mäkitalo; Christian Maurice; Björn Öhlander
Journal:  Environ Sci Pollut Res Int       Date:  2017-07-13       Impact factor: 4.223

2.  Arsenopyrite weathering under conditions of simulated calcareous soil.

Authors:  René H Lara; Leticia J Velázquez; Jorge Vazquez-Arenas; Martine Mallet; Manuel Dossot; Israel Labastida; Fabiola S Sosa-Rodríguez; León F Espinosa-Cristóbal; Miguel A Escobedo-Bretado; Roel Cruz
Journal:  Environ Sci Pollut Res Int       Date:  2015-10-24       Impact factor: 4.223

3.  Reuse of Red Mud and Bauxite Tailings Mud as Subgrade Materials from the Perspective of Mechanical Properties.

Authors:  Xiaoduo Ou; Shengjin Chen; Jie Jiang; Jinxi Qin; Lu Zhang
Journal:  Materials (Basel)       Date:  2022-01-31       Impact factor: 3.623

  3 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.