Literature DB >> 23225547

Improvement of the visible-light photocatalytic performance of TiO2 by carbon mesostructures.

Wei Wei1, Chao Yu, Qingfei Zhao, Guisheng Li, Ying Wan.   

Abstract

An improvement in the photodegradation performance for dyes due to interaction between carbon and titania in a self-assembled mesoporous C-TiO(2) composite catalyst, even for the difficult degradation of azo dyes, is reported herein. The dye removal process involves adsorption of the dye from water by the mesoporous carbon-titania, followed by photodegradation on the separated dye-loaded solid. Such adsorption-catalysis cycles can be carried out more than 80 times without discernible loss of photocatalytic activity or the anatase content of the composite. In each run, about 120 mg dye per g catalyst can be degraded. The mesoporous carbon-titania catalyst also exhibits a high capacity for converting methyl orange in aqueous solution under visible light. Characterization by XRD, TEM, and N(2) sorption techniques has revealed that the self-assembled composite catalyst has an ordered mesostructure, uniform mesopores (4.3 nm), a large pore volume (0.30 cm(3) g(-1)), and a high surface area (348 m(2) g(-1)). The pore walls are composed of amorphous carbon and anatase nanoparticles of size 4.2 nm, which are well dispersed and confined. X-ray photoelectron spectroscopy (XPS), surface photovoltage spectroscopy (SPS), and UV/Vis absorption results indicate doping of carbon into the anatase lattice and a change in the bandgap of the semiconductor. The synergistic improvement in the composite catalyst can be attributed to the following features: (1) carbon doping of the anatase lattice modifies its bandgap and enhances its activity under visible light; (2) confinement within carbon pore walls prevents aggregation of tiny anatase nanoparticles, improving their activity and stability; (3) the mesopores provide a confined space for photocatalysis; and (4) the strong adsorption ability of porous carbon for organic substances ensures that large quantities can be processed and inhibits further diffusion of the adsorbed organic substances, thereby enhancing the mineralization on anatase.
Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Entities:  

Year:  2012        PMID: 23225547     DOI: 10.1002/chem.201202691

Source DB:  PubMed          Journal:  Chemistry        ISSN: 0947-6539            Impact factor:   5.236


  4 in total

1.  Photocatalytic discoloration of Methyl Orange by anatase/schorl composite: optimization using response surface method.

Authors:  Huan-Yan Xu; Wei-Chao Liu; Jian Shi; Hang Zhao; Shu-Yan Qi
Journal:  Environ Sci Pollut Res Int       Date:  2013-08-14       Impact factor: 4.223

2.  Mesoporous TiO2/Carbon Beads: One-Pot Preparation and Their Application in Visible-Light-Induced Photodegradation.

Authors:  Xiaowei Li; Yanqiu Jiang; Wenjing Cheng; Yudong Li; Xianzhu Xu; Kaifeng Lin
Journal:  Nanomicro Lett       Date:  2015-03-24

3.  Palladium catalyzed radical relay for the oxidative cross-coupling of quinolines.

Authors:  Xiaorui Zhao; Xiaojuan Zhu; Kang Wang; Junqian Lv; Shangjun Chen; Guohua Yao; Junyu Lang; Fei Lv; Yinghui Pu; Ruoou Yang; Bingsen Zhang; Zheng Jiang; Ying Wan
Journal:  Nat Commun       Date:  2022-07-19       Impact factor: 17.694

Review 4.  Preparative semiconductor photoredox catalysis: An emerging theme in organic synthesis.

Authors:  David W Manley; John C Walton
Journal:  Beilstein J Org Chem       Date:  2015-09-09       Impact factor: 2.883

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.