Literature DB >> 23109104

High-throughput printing via microvascular multinozzle arrays.

Christopher J Hansen1, Rajat Saksena, David B Kolesky, John J Vericella, Stephen J Kranz, Gregory P Muldowney, Kenneth T Christensen, Jennifer A Lewis.   

Abstract

Microvascular multinozzle arrays are designed and fabricated for high-throughput printing of functional materials. Ink-flow uniformity within these multigeneration, bifurcating microchannel arrays is characterized by computer modeling and microscopic particle image velocimetry (micro-PIV) measurements. Both single and dual multinozzle printheads are produced to enable rapid printing of multilayered periodic structures over large areas (≈1 m(2)).
Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mesh：

Substances：

Year:  2012        PMID： 23109104     DOI： 10.1002/adma.201203321

Source DB:  PubMed          Journal:  Adv Mater        ISSN： 0935-9648            Impact factor:   30.849


  30 in total

Review 1.  Printing soft matter in three dimensions.

Authors:  Ryan L Truby; Jennifer A Lewis
Journal:  Nature       Date:  2016-12-14       Impact factor: 49.962

2.  Scalable units for building cardiac tissue.

Authors:  Xiaofeng Ye; Liang Lu; Martin E Kolewe; Keith Hearon; Kristin M Fischer; Jonathan Coppeta; Lisa E Freed
Journal:  Adv Mater       Date:  2014-09-19       Impact factor: 30.849

Review 3.  25th anniversary article: Rational design and applications of hydrogels in regenerative medicine.

Authors:  Nasim Annabi; Ali Tamayol; Jorge Alfredo Uquillas; Mohsen Akbari; Luiz E Bertassoni; Chaenyung Cha; Gulden Camci-Unal; Mehmet R Dokmeci; Nicholas A Peppas; Ali Khademhosseini
Journal:  Adv Mater       Date:  2014-01-08       Impact factor: 30.849

Review 4.  Opportunities and challenges of translational 3D bioprinting.

Authors:  Sean V Murphy; Paolo De Coppi; Anthony Atala
Journal:  Nat Biomed Eng       Date:  2019-11-06       Impact factor: 25.671

Review 5.  Biomaterials for Bioprinting Microvasculature.

Authors:  Ryan W Barrs; Jia Jia; Sophia E Silver; Michael Yost; Ying Mei
Journal:  Chem Rev       Date:  2020-09-01       Impact factor: 60.622

6.  Extrusion and Microfluidic-based Bioprinting to Fabricate Biomimetic Tissues and Organs.

Authors:  Elham Davoodi; Einollah Sarikhani; Hossein Montazerian; Samad Ahadian; Marco Costantini; Wojciech Swieszkowski; Stephanie Willerth; Konrad Walus; Mohammad Mofidfar; Ehsan Toyserkani; Ali Khademhosseini; Nureddin Ashammakhi
Journal:  Adv Mater Technol       Date:  2020-05-26

7.  Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs.

Authors:  Luiz E Bertassoni; Martina Cecconi; Vijayan Manoharan; Mehdi Nikkhah; Jesper Hjortnaes; Ana Luiza Cristino; Giada Barabaschi; Danilo Demarchi; Mehmet R Dokmeci; Yunzhi Yang; Ali Khademhosseini
Journal:  Lab Chip       Date:  2014-05-23       Impact factor: 6.799

8.  Microfluidic Bioprinting for Engineering Vascularized Tissues and Organoids.

Authors:  Yu Shrike Zhang; Qingmeng Pi; Anne Metje van Genderen
Journal:  J Vis Exp       Date:  2017-08-11       Impact factor: 1.355

Review 9.  Three-Dimensional Bioprinting Strategies for Tissue Engineering.

Authors:  Yu Shrike Zhang; Rahmi Oklu; Mehmet Remzi Dokmeci; Ali Khademhosseini
Journal:  Cold Spring Harb Perspect Med       Date:  2018-02-01       Impact factor: 6.915

10.  3D Printed Bionic Nanodevices.

Authors:  Yong Lin Kong; Maneesh K Gupta; Blake N Johnson; Michael C McAlpine
Journal:  Nano Today       Date:  2016-04-29       Impact factor: 20.722
View more

北京卡尤迪生物科技股份有限公司 © 2022-2023.