Literature DB >> 23079282

The effect of translucency of Y-TZP based all-ceramic crowns fabricated with difference substructure designs.

Naota Kumagai1, Hiroshi Hirayama, Matthew D Finkelman, Shigemi Ishikawa-Nagai.   

Abstract

PURPOSE: To analyse the effect of translucency of Y-TZP based all-ceramic crowns fabricated with different substructure thicknesses and extensions. The effect of restoration shading is also investigated.
MATERIALS AND METHODS: A maxillary right central incisal typodont tooth was prepared and a die was fabricated with Type IV stone after making impression. Horizontally and vertically reduced substructure extensions were designed at the facial cervical part with 0.3 mm and 0.5mm thick Lava Y-TZP. Each substructure was fabricated with two different shades, FS1 and FS7. A1 shade veneering porcelain was applied on FS1 shade Y-TZP substructures and D3 shade veneering porcelain was applied on FS7 shade Y-TZP substructures with lost wax and press ceramic technique. Ten specimens were fabricated for a total of 8 groups. The cervical and body colour of specimens were analysed with a spectrophotometer, after placing specimens on the two different coloured abutment teeth using translucent try-in cement. The data were obtained in CIELAB colour coordinates L*a*b*, and DE* through the test specimens over ND1 and ND8 shade abutments were calculated.
RESULTS: At the cervical area, there was a significant difference on substructure extension (P < 0.001). At the body area, results were borderline on substructure thickness (P = 0.05) and there was a significant difference on restoration shade (P = 0.001).
CONCLUSIONS: Vertical reduction design of Y-TZP substructure could increase DE* at the cervical area. Decreasing thickness of Y-TZP substructure may increase DE* at the body area. Increasing the value of Y-TZP based-all ceramic crown shade could increase DE* at the body area. CLINICAL SIGNIFICANCE: The translucency of a Y-TZP based all-ceramic crowns may influence its esthetic outcome when it is used on a discoloured abutment tooth. Clinicians should be aware of the effect of substructure design on the translucency of YTZP based all-ceramic crowns. 2012 Elsevier Ltd. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2013        PMID: 23079282     DOI: 10.1016/j.jdent.2012.10.005

Source DB:  PubMed          Journal:  J Dent        ISSN: 0300-5712            Impact factor:   4.379


  4 in total

Review 1.  The influence of zirconia veneer thickness on the degree of conversion of resin-matrix cements: an integrative review.

Authors:  Christie M Tafur-Zelada; Oscar Carvalho; Filipe S Silva; Bruno Henriques; Mutlu Özcan; Júlio C M Souza
Journal:  Clin Oral Investig       Date:  2021-03-30       Impact factor: 3.573

2.  Comparison of the translucency of shaded zirconia all-ceramic systems.

Authors:  Sevcan Kurtulmus-Yilmaz; Mutahhar Ulusoy
Journal:  J Adv Prosthodont       Date:  2014-10-21       Impact factor: 1.904

3.  Clinical evaluation of monolithic zirconia crowns for posterior teeth restorations.

Authors:  Zhenyu Tang; Xinyi Zhao; Hui Wang; Bin Liu
Journal:  Medicine (Baltimore)       Date:  2019-10       Impact factor: 1.889

4.  Effects of dentin and enamel porcelain layer thickness on the color of various ceramic restorations.

Authors:  Binting Xu
Journal:  J Esthet Restor Dent       Date:  2021-07-13       Impact factor: 3.040

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.