Spatial and orientation control of cylindrical nanostructures in ABA triblock copolymer thin films by raster solvent vapor annealing.

We present a spatially resolved approach for the solvent vapor annealing (SVA) of block copolymer thin films that permits the facile and relatively rapid manipulation of nanoscale ordering and nanostructure orientation. In our method, a localized (point) SVA zone is created through the use of a vapor delivery nozzle. This point annealing zone can be rastered across the thin film using a motorized stage to control the local nanoscale structure and orientation in a cylinder-forming ABA triblock copolymer thin film. At moderate rastering speeds (∼100 μm/s) (i.e., relatively modest annealing time at a given point), the film displayed ordered cylindrical nanostructures with the cylinders oriented parallel to the substrate surface. As the rastering speed was decreased (∼10 μm/s), the morphology transformed into a surface nanostructure indicative of cylinders oriented perpendicular to the substrate surface. These perpendicular cylinder orientations also were created by rastering multiple times over the same region, and this effect was found when rastering in either retrace (overlapping) or crossed-path (orthogonal) geometries. Similar trends in nanostructure orientation and ordering were obtained from various nozzle diameters by accounting for differences in solvent flux and annealing time, illustrating the universality of this approach. Finally, we note that our "stylus-based" raster solvent vapor annealing technique allows a given point to be solvent annealed approximately 2 orders of magnitude faster than conventional "bell jar" solvent vapor annealing.