Flaw strength distributions and statistical parameters for ceramic fibers: the normal distribution.

The present paper investigates large sets of ceramic fibre failure strengths (500 to 1000 data) produced using tensile tests on tows that contained either 500 or 1000 filaments. The probability density function was determined through acoustic emission monitoring which allowed detection and counting of filament fractures. The statistical distribution of filament strengths was described using the normal distribution. The Weibull equation was then fitted to this normal distribution for estimation of statistical parameters. A perfect agreement between both distributions was obtained, and a quite negligible scatter in statistical parameters was observed, as opposed to the wide variability that is reported in the literature. Thus it was concluded that flaw strengths are distributed normally and that the statistical parameters that were derived are the true ones. In a second step, the conventional method of estimation of Weibull parameters was applied to these sets of data and, then, to subsets selected randomly. The influence of other factors involved in the conventional method of determination of statistical parameters is discussed. It is demonstrated that selection of specimens, sample size, and method of construction of so-called Weibull plots are responsible for statistical parameters variability.