Studies of non-vacuum processing of Cu-chalcogenide thin films.

Cu-chalcogenide thin films were prepared using a two stage method: one step electrodeposition of CuISe and CIGSe, and the sulfurisation of CISe to prepare CISSe thin films. The films were deposited on different substrates: Mo and ITO coated glass. The optimum potentials for electrodeposition of CISe and CIGSe films were respectively selected in the range -400 to -550 mV and -650 to -700 mV (vs. SCE). The electrodeposited layers were firmly adhesive. The well known chalcopyrite structure appears after annealing at 400 degrees C under Argon for CISe. The band gap value deduced from the optical measurements is close to 1 eV. To increase this value, addition of gallium in the aqueous electrolytic solution was performed. A band gap value as high as 1.26 eV was recorded on the obtained CIGSe films. Sulfurisation of CISe layers under 5% H2S/Ar atmosphere lead to a shift of the position of the principal XRD peaks indicating the substitution of selenium atoms by sulfur atoms and thus the formation of the quaternary CISSe. Optical measurements performed on this quaternary compound show that our films exhibit a band gap value scaling from 1 eV to 1.4 eV depending on the amount of sulphur incorporated into the layers during the heat treatments.