Literature DB >> 22946743

Gas permeability and thermal behavior of polypropylene films used for packaging minimally processed fresh-cut potatoes: a case study.

Valentina Siracusa1, Ignazio Blanco, Santina Romani, Urszula Tylewicz, Marco Dalla Rosa.   

Abstract

UNLABELLED: This work reports an experimental study on the permeability and thermal behavior of commercial polypropylene (PP) film used for fresh-cut potatoes packaging. The permeability was tested using oxygen, carbon dioxide, nitrogen, mix of these 3 gases, normally used for modified atmosphere packaging (MAP) and Air, to understand if it would be possible to extend the shelf life of this food product designed for the catering field in respect to the packaging behavior. The temperature influence on permeability data, from 5 to 40 °C, was analyzed, before and after 4, 8, 12, 15, and 20 d of food contact, pointing out the dependence between temperature and gas transmission rate (GTR), solubility (S), diffusion coefficient (D), and time lag (t(L)) parameters. The activation energies (E) of the permeation process were determined with the different gases used in the experiments. The thermal behavior of PP film was studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TG) to well understand its thermal stability. Fourier transformed-infrared with attenuated total reflectance (FT-IR/ATR) spectroscopy was also performed in order to study the influence of the food contact on the chemical characteristics of the polymer film. The results obtained were discussed and compared each other. Studied samples showed, for all investigated gases, an increase of gas permeability and S values at higher temperature. Heat resistance classification among the sample as it is and stored in modified atmospheres was made. Finally all performed experiments have showed good polymer stability for the shelf-life storage potatoes under study. PRACTICAL APPLICATION: Study of packaging material was performed in a range of temperature, which can simulate the service condition to assess the suitability of a commercial polymer film for modified atmosphere packaging of fresh-cut potatoes minimally processed designed for catering purpose.
© 2012 Institute of Food Technologists®

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22946743     DOI: 10.1111/j.1750-3841.2012.02905.x

Source DB:  PubMed          Journal:  J Food Sci        ISSN: 0022-1147            Impact factor:   3.167


  4 in total

1.  Performance of Poly(lactic acid) Surface Modified Films for Food Packaging Application.

Authors:  Valentina Siracusa; Marco Dalla Rosa; Alexey L Iordanskii
Journal:  Materials (Basel)       Date:  2017-07-25       Impact factor: 3.623

2.  Active biodegradable packaging films modified with grape seeds lignin.

Authors:  Pavel Vostrejs; Dana Adamcová; Magdalena Daria Vaverková; Vojtech Enev; Michal Kalina; Michal Machovsky; Markéta Šourková; Ivana Marova; Adriana Kovalcik
Journal:  RSC Adv       Date:  2020-08-07       Impact factor: 4.036

3.  How Stress Treatments Influence the Performance of Biodegradable Poly(Butylene Succinate)-Based Copolymers with Thioether Linkages for Food Packaging Applications.

Authors:  Valentina Siracusa; Laura Genovese; Andrea Munari; Nadia Lotti
Journal:  Materials (Basel)       Date:  2017-08-30       Impact factor: 3.623

4.  Polystyrene Nanocomposites Reinforced with Novel Dumbbell-Shaped Phenyl-POSSs: Synthesis and Thermal Characterization.

Authors:  Lorenzo Abate; Francesco Agatino Bottino; Gianluca Cicala; Maria Assunta Chiacchio; Giulia Ognibene; Ignazio Blanco
Journal:  Polymers (Basel)       Date:  2019-09-09       Impact factor: 4.329

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.