Literature DB >> 22907043

A solid-phase microextraction-gas chromatographic approach combined with triple quadrupole mass spectrometry for the assay of carbamate pesticides in water samples.

Brunella Cavaliere1, Marcello Monteleone, Attilio Naccarato, Giovanni Sindona, Antonio Tagarelli.   

Abstract

A simple and sensitive method was developed for the quantification of five carbamate pesticides in water samples using solid phase microextraction (SPME) combined with gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS). The performance of five SPME fibers was tested in univariate mode whereas the other variables affecting the efficiency of SPME analysis were optimized by the multivariate approach of design of experiment (DoE) and, in particular, a central composite design (CCD) was applied. The optimum working conditions in terms of response values were achieved by performing analysis with polydimethylsiloxane/divinylbenzene (PDMS/DVB) fiber in immersion mode for 45min at room temperature with addition of NaCl (10%). The multivariate chemometric approach was also used to explore the chromatographic behavior of the carbamates and to evaluate the importance of each variable investigated. An overall appraisement of results shows that the factor which gave a statistically significant effect on the response was only the injection temperature. Identification and quantification of carbamates was performed by using a gas chromatography-triple quadrupole mass spectrometry (GC-QqQ-MS) system in multiple reaction monitoring (MRM) acquisition. Since the choice of internal standard represented a crucial step in the development of method to achieve good reproducibility and robustness for the entire analytical protocol, three compounds (2,3,5-trimethacarb, 4-bromo-3,5-dimethylphenyl-n-methylcarbamate (BDMC) and carbaryl-d7) were evaluated as internal standards. Both precision and accuracy of the proposed protocol tested at concentration of 0.08, 5 and 3 μg l⁻¹ offered values ranging from 70.8% and 115.7% (except for carbaryl at 3 μg l⁻¹) and from 1.0% and 9.0% for accuracy and precision, respectively. Moreover, LOD and LOQ values ranging from 0.04 to 1.7 ng l⁻¹ and from 0.64 to 2.9 ng l⁻¹, respectively, can be considered very satisfactory.
Copyright © 2012 Elsevier B.V. All rights reserved.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22907043     DOI: 10.1016/j.chroma.2012.08.011

Source DB:  PubMed          Journal:  J Chromatogr A        ISSN: 0021-9673            Impact factor:   4.759


  4 in total

1.  Development of an immunoassay for the detection of carbaryl in cereals based on a camelid variable heavy-chain antibody domain.

Authors:  Zhiping Liu; Kai Wang; Sha Wu; Zhanhui Wang; Guochun Ding; Xiujing Hao; Qing X Li; Ji Li; Shirley J Gee; Bruce D Hammock; Ting Xu
Journal:  J Sci Food Agric       Date:  2019-04-03       Impact factor: 3.638

Review 2.  Optimizing Mass Spectrometry Analyses: A Tailored Review on the Utility of Design of Experiments.

Authors:  Elizabeth S Hecht; Ann L Oberg; David C Muddiman
Journal:  J Am Soc Mass Spectrom       Date:  2016-03-07       Impact factor: 3.109

3.  Validating Analytical Protocols to Determine Selected Pesticides and PCBs Using Routine Samples.

Authors:  Oscar Pindado Jiménez; Susana García Alonso; Rosa María Pérez Pastor
Journal:  J Anal Methods Chem       Date:  2017-10-29       Impact factor: 2.193

4.  Sensitive and selective detection of the highly toxic pesticide carbofuran in vegetable samples by a molecularly imprinted electrochemical sensor with signal enhancement by AuNPs.

Authors:  Peipei Qi; Jiao Wang; Xiangyun Wang; Zhiwei Wang; Hao Xu; Shanshan Di; Qiang Wang; Xinquan Wang
Journal:  RSC Adv       Date:  2018-07-16       Impact factor: 3.361

  4 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.