Literature DB >> 22881600

Evaluation of co-processed excipients used for direct compression of orally disintegrating tablets (ODT) using novel disintegration apparatus.

Witold Brniak1, Renata Jachowicz, Anna Krupa, Tomasz Skorka, Krzysztof Niwinski.   

Abstract

The compendial method of evaluation of orodispersible tablets (ODT) is the same disintegration test as for conventional tablets. Since it does not reflect the disintegration process in the oral cavity, alternative methods are proposed that are more related to in vivo conditions, e.g. modified dissolution paddle apparatus, texture analyzer, rotating shaft apparatus, CCD camera application, or wetting time and water absorption ratio measurement. In this study, three different co-processed excipients for direct compression of orally disintegrating tablets were compared (Ludiflash, Pharmaburst, F-Melt). The properties of the prepared tablets such as tensile strength, friability, wetting time and water absorption ratio were evaluated. Disintegration time was measured using the pharmacopoeial method and the novel apparatus constructed by the authors. The apparatus was based on the idea of Narazaki et al., however it has been modified. Magnetic resonance imaging (MRI) was applied for the analysis of the disintegration mechanism of prepared tablets. The research has shown the significant effect of excipients, compression force, temperature, volume and kind of medium on the disintegration process. The novel apparatus features better correlation of disintegration time with in vivo results (R(2) = 0.9999) than the compendial method (R(2) = 0.5788), and presents additional information on the disintegration process, e.g. swelling properties.

Entities:  

Mesh:

Substances:

Year:  2012        PMID: 22881600     DOI: 10.3109/10837450.2012.710238

Source DB:  PubMed          Journal:  Pharm Dev Technol        ISSN: 1083-7450            Impact factor:   3.133


  6 in total

1.  Pediatric Dispersible Tablets: a Modular Approach for Rapid Prototyping.

Authors:  Jonas Buck; Jörg Huwyler; Peter Kühl; Angela Dischinger
Journal:  Pharm Res       Date:  2016-06-01       Impact factor: 4.200

Review 2.  Characterisation of Selected Materials in Medical Applications.

Authors:  Kacper Kroczek; Paweł Turek; Damian Mazur; Jacek Szczygielski; Damian Filip; Robert Brodowski; Krzysztof Balawender; Łukasz Przeszłowski; Bogumił Lewandowski; Stanisław Orkisz; Artur Mazur; Grzegorz Budzik; Józef Cebulski; Mariusz Oleksy
Journal:  Polymers (Basel)       Date:  2022-04-09       Impact factor: 4.967

3.  Fast Melt Cocoa Butter Tablet: Effect of Waxes, Starch, and PEG 6000 on Physical Properties of the Preparation.

Authors:  Kai Bin Liew; Long Chiau Ming; Bey-Hing Goh; Kok Khiang Peh
Journal:  Molecules       Date:  2022-05-13       Impact factor: 4.927

4.  Formulation of Chewable Tablets Containing Carbamazepine-β-cyclodextrin Inclusion Complex and F-Melt Disintegration Excipient. The Mathematical Modeling of the Release Kinetics of Carbamazepine.

Authors:  Adina Magdalena Musuc; Valentina Anuta; Irina Atkinson; Iulian Sarbu; Vlad Tudor Popa; Cornel Munteanu; Constantin Mircioiu; Emma Adriana Ozon; George Mihai Nitulescu; Mirela Adriana Mitu
Journal:  Pharmaceutics       Date:  2021-06-21       Impact factor: 6.321

5.  The practical approach to the evaluation of methods used to determine the disintegration time of orally disintegrating tablets (ODTs).

Authors:  Witold Brniak; Renata Jachowicz; Przemyslaw Pelka
Journal:  Saudi Pharm J       Date:  2015-01-16       Impact factor: 4.330

Review 6.  3D Printing in Pharmaceutical and Medical Applications - Recent Achievements and Challenges.

Authors:  Witold Jamróz; Joanna Szafraniec; Mateusz Kurek; Renata Jachowicz
Journal:  Pharm Res       Date:  2018-07-11       Impact factor: 4.200

  6 in total

北京卡尤迪生物科技股份有限公司 © 2022-2023.